Recently, I began to have this problem where the phone is showing full signal but the phone is actually not receiving any signal. So calls will not come in at all.
View 3 RepliesSignal Bar is full but cannot make or receive calls , when dialing out "connection error" comes , If dialing the number it comes as switched off ....The phone needs to be restarted every time this happens , happens every day atleast once , attempted a factory restore , still the same issue ......Using the same unit for more than a year , now the issue cropped up after the Belle update only.....
View 1 Replies View RelatedWhy can't I send a video? I've trimmed it it down to a couple mb and still won't go. I'm on Verizon with full strength signal. I've tried sending with gosms, text and, to no avail.
View 9 Replies View RelatedI was wondering if anyone knows what algorithm is used for the signal bars on the Photon 4G. I have found that there seems to be no correlation between the signal strength (in dBm / asu) in Settings -> About phone -> Status and the signal bars that are shown. Often the signal bars will shoot from 1 to 5 or 6 even with really low signal ( ~97 to > 100 dBm) that doesn't fluctuate.
View 3 Replies View RelatedI have been using my iphone 5 since the last 9 months. The wifi just worked fine at home when connecting with the wifi router. It also worked fine everywhere I went where there was a wifi zone. Since the last 7 days or so I am facing a sudden problem. When connecting to my home Wifi, it shows full signal strength, yet the internet connection drops. At times, even whatsapp does not work, cannot send images most of the times. Apple store, iTunes and emails stops working mostly. I have reset my wireless router recenty and still this problem persists. There does not seem to be any problem with the router because other devices like my laptop and other mobile phones are working fine with wifi.
Info:
iPhone 5
Before the software update to 2.1 I could tell what kind of signal strength I had (i.e. 3G or G etc) now I have a H, but I don't have any idea of what it means.
View 1 Replies View RelatedI bought neo v and having 2 issue on that,
1) Wi-fi issue: Wi-fi signal strength is weaker then other phone like HTC wildfire S, i am having another phone wildfire s and in the same room the signals of wifi of HTC is good and in neo v signal is too low/poor which results connection is lost time to time , to resolve the issue i've to delete/forget the connection again n again.
2) Its light sensor is too sensitive , in dim lights its brightness is too low while in gud background lights its brightness is gud.Please provide any solution to switch off that sensor.
I've noticed for the last couple of months anytime I check my "Network type and strength" in the About phone/status menu the 4G varies depending on where I am, but no matter what, the 1x always shows -120dBm.
View 10 Replies View RelatedI have an E72 and I face a huge problem with the charge in the battery. I have replaced the battery with a standard BP 4L yesterday and I keep facing the same issue. Even after a full charge, I get a 'Battery Low' signal. Can anyone help me to figure out whether the problem is with the battery or the phone?
View 3 Replies View RelatedI have a problem with my signal when I enter my college building, the reception will fall so low that it will show "no service" and if I try to manually connect to my service provider, it says they are unavailable. my sim works fine, I've recently received a new sim, and my phone is updated to 2.1, awaiting the 2.3 update.
I've upgraded from a Samsung Jet and even that had perfect signal in lessons, never went below 2 bars, so why is the X10 so poor at signal strength? is there anything I can do to stop this? is the phone at fault here?
I bought new iphone 5s and facing huge problem with Signal strength it always show "No service"
But when I change my SIM card to my samsung phone then I am getting the signals properly at same location (My room).
If Samsung can access the signals why iphone can not ? Every time when I need to talk to somebody I have to go out of my room which is very irritating.
info:
iPhone 5s
Unless I switch over to EDGE.A couple of days ago I had my old 3GS swapped out by Apple because the wireless radio wasn't working properly - I was in San Diego with some family members who all have 3GS's and their phones worked great and mine had no service. When I returned home to Glendale, CA, I had the phone switched out at the local Apple store, only to find that my network connection was now, all of a sudden, spotty at best.
I talked to ATT in one phone call and they told me (although I had to beat it out of them) that there was some tower work going on in my area but with no ETA as to when it might be done. I called back again later that day to try and get a better answer but no dice - just ambiguous nonsense from the guy on the other end.What's the best option here? Just wait it out for a week on EDGE and see if the problem fixes itself?
The first week i had my iPhone 4, i had about 1 bar.Right now i am having 3 bars which is what i usually get and sometimes 5 bars which never happened with my iPhone 3G.I heard that AT&T is enhancing their signal strength because of the overflow of the new iPhone 4 which could make sense but what about you?
View 24 Replies View RelatedIm having a huge problem with my phone. Galaxy s5 is the phone. Sent it to Samsung because it wouldn't charge. So they replaced the battery port and LED screen. Sent it back. I hooked it back up. Starting using it and now i cant get 4g anymore. It will come on then go out and have a X on signal bar. Then i cant do anything no calls no text no nothing. I have to switch over to 3G which really sucks. And even that goes out now. Im lost. What to do??. And this is my signal strength -113 dbm 0 asu. Not sure what it means
View 1 Replies View Relatedi have very poor signal with my brand new iphone 4s that i only got yesterday on a contract, improve my signal, as my iphine is normally in NO SERVICE! would i be able to send it back to apple or something?
Info:
iPhone 4S, iOS 5.1, no service
My iphone 4 will not pick up wifi signals that it did before at all at various locations. Therefore I dont believe its the router.
I have reset the setting for wifi. It did not fix the problem.
How do I improve signal strength
Info:
iPhone 4S, iOS 5
Does anyone know how to display signal stength in dbm instead of bars on the Pearl 9105 3g. On other blackberrys you type Alt+mnll but my phone does not have an alt key or a qwerty keys to do this.
View 2 Replies View Relatedphone will lose signal. have to restart phone to get signal back. anybody know how to fix
View 5 Replies View RelatedMy E6 shows no signal inside room (I tested by changing SIM to Nokia 5233 which shows 4 lines in the sames place). Outside the signal strength fluctuates.
View 3 Replies View RelatedIf anyone is still having problems with the signal strength, try turning off 3G and Location via Settings section. I constantly had only 1-2 bars, but once turning them off my signal has improved massively; now getting 5 bars 90% of the time. I reckon it is more 3G affecting the signal, but try with both off just to be sure. If it works, then turn on 3G only when needed.
View 9 Replies View RelatedI restarted my router and restored my phone to factory settings and it still wont connect to my home wifi. It will connect at work and everywhere else but home. Every time i try to connect it tells me "Failed to connect to WiFi please check your network connection" or whatever. And when i click on our home WiFi name it says the signal strength is Excellent....
View 1 Replies View RelatedSo I made the leap from my iPhone 5S to the Icon on Friday and I'm enjoying it thus far. One thing I've noticed; however, is that the Verizon Network signal strength isn't nearly as good and I'm not sure if there's a way to reset it or others can confirm. For example at my house, where I always had 3-4 bars of LTE with my iPhone 5s and the 5 before it - I now can only get 2 with the Icon.
View 7 Replies View RelatedI am using a new I phone 4s on Straight Talk and I have only 1 to 2 bars maximum anywhere I go and then it will have no service at all.I was a previous verizon customer and had 4 to 5 sitting in my home now I have 1 or 2 and if I walk around sometimes goes to no service at all. Verizon did not have service everywhere I went but that was in hilly areas as I live in central Illinois and have talked to others with AT&T and they are getting better service than this as that is what towers Straight Talk uses. I am getting a Gel bumper cover and have already tried the black tape it did not help. It says I have 4 G sitting in house but cannot make a call and the 4G goes in and out also.
Info:
iPhone 4S, iOS 5.1
During the last week i've uptated my iphone's iOS from the 5.1 to the 5.1.1 and now when I use it without the bumper or any other cover I can't find the 3G or the 2G signal.
Info:
iPhone 4, iOS 5.0.1
In the last month or so I have noticed less bars of 4G when I am at my office.I know Verizon has been tinkering with their network.So what would be a good dBm signal strength within a fairly close proximity to one of their towers?
View 5 Replies View RelatedI'm facing a serious signal reception problem for my new E7-00 mobile phone.few ways how can I improve the same. Let me know where exactly the Network Signal ports located for the mobile.
View 19 Replies View RelatedOn occasion I get a 123 symbol in the upper right corner over my signal strength indication symbol. Does anybody know what this is for? I can not locate it in any of the PDF manuals.
View 14 Replies View RelatedMy Mum bought a Sony Ericsson C510 which has an unsightly "Tesco Mobile" logo on the right softkey. On the first night, I took to 'debranding' by dumping a custom_upgrade.xml in the phone's ROM using A2 uploader and then running Sony Ericsson updater so it fetched a normal firmware ROM (Western Europe C6A, 1209-4774). Afterwards the signal strength was abysmal so I tried a UK custom CDA then finally just went back to the TESCO CDA... (there's however no way of me knowing if it's the exact same CDA though, it was listed on A2 CDA generator). It was showing full-strength for a while - overnight it's back to abysmal strength. There's a chance it was like this before - though I recall seeing it on full bars when she'd just got it out the packaging. Now I'm really unsettled that I've screwed her new phone. Doesn't help that I was like "Dad, I updated the software on Mum's phone and now..." he was displeased as he remembers my motorola modding days. Ofcourse I didn't dare mention that I fiddled with the way it updated. Is it possible I'm just noticing this now? The CDA just changes the region/branding of the firmware SUSE fetches, right. Is there any way to ensure I have the original CDA of the phone?[ This Message was edited by: schmoogrz on 2010-08-12 12:08 ]
View 4 Replies View RelatedSignal strength varies from 5 to 0 bars at the same location (home). Drops calls.
Info:
iPhone 4, iOS 5.1.1
I get a poor signal indoors at home - on Orange and it's always been the case. I spoke to their customer services and was told to switch the phone from auto select for Network Mode to GSM only. My choices are GSM only, WCDMA only or Auto.
True, having done so, the signal strength seems better though not amazing but, ordinarily, I get then just a "G" for data. I found that switching to WCDMA only, data goes to 3G or even H and sometime H+ but I nearly always lose the standard signal.
I dont understand the difference between GSM and WCDMA nor whether the results I see when choosing each are to be expected or not. I'd welcome any information from those of you who know more about these things than I do.
