Motorola Motoactv :: "wake Up Device" Doesn't Work?
Mar 27, 2012
When the watch is switched on, the "wake up device" function works fine. However,after the watch has been on for a certain period the "wake up device" function doesn't work. Has anyone come across such issue?
I've been a MotoACTV user for just over two weeks now and woke to find that my shake to wake function and calorimeter/pedometer aren't working. My device is not paired with any phone and because it's new, it's got the most recent s/w already installed. I checked the Wake Device field on the watch and it was set. Am I missing something or is there an exsiting problem for these symptoms? The MotoACTV s/w version MA 1.7.12 N8.
Problem Description I was in a middle of a workout with the MOTOACTV. It was connected wirelessly to my heart rate monitor. During the workout the UI became high latency and almost completely unresponsive. It would take 3 4 presses to the Power Key to get the device to wake up. When device did wake up, the CapTouch UI would not accept any swipe or touch gestures. I finally was able to power the device down hoping for a graceful reset. However I was concerned that I was never going to get to the point of getting to the power down screen. seen this issue on other Android devices and know that there are times when a battery pull is needed due to a deadlock or a process gone haywire.
My motoactv will not connect with Motorola Media Link via Motocast. It gives me an error message that says that the program has stopped working and shuts down the Motorola Media Link from syncing. Any word on what the problem could be? I have ripped and re-installed the program several times only to see Motorola Media Link work once.
I just got a MOTOACTV last month, use it as a fit trainer and never use the music function. Few days ago I want try listen some music but it can not play! No reaction at all! Also FM radio, show "No Signal". I try reset factory and change the headphone but still have this problem.
Recently updated my iPhone 4 to ios 7.1.2. Currently my worst problem: instead of going into sleep mode, the phone turns off completely. I then cannot turn the phone back on with the sleep/wake button. To turn the phone back on, I need to do a hard reboot each time by holding down the home and sleep/wake buttons simultaneously. I have tried going into settings/general/reset and selecting "reset all".
My triumph seems to go into low power or "sleep"mode (Black screen) and can't be woken with the side power button. The battery life doesn't seems to be the issue because it will happen when the battery is at half charge or full charge. This seems to be occurring when it has not been used in awhile (~30 minutes). The only way to use my phone again is to remove battery and reinsert. Most of the time this occurs the red light is still on and blinking, but once there was no light at all with 3/4 batter life remaining. This is my second Triumph after having a bad ear speaker in the first one. Anyone else having this issue or have any suggestions on how to fix this. I've read the posts and I am curious if it has anything to do with WIFI being on since WIFI is on all the time when I am home.
I'm looking at getting a Garmin 410. I'm not familiar with the different versions of Garmin. I currently have the Motoactv. What can the Garmin do compared to the Motoactv. I know the Garmin doesn't play music and doesn't have a fancy touch screen.
I have a 9800 black berry device that I bought from Saudi Arabia. This device doesn't work any more and without any previous problems with it. So, I want to know from where I can fix my phone and how much that will cost me? By the way, I am a student in Waterloo city, so I assume that it will be much easier to solve my problem soon.
I have WiFi enabled. Often when I am near a wireless access point, my RAZR M still uses 4G. It's as if the WiFi is going to sleep when I power the screen off, but it doesn't wake up again. Turning WiFi off and on makes it reconnect.It seems to happen mostly when I'm at home, where I also use the Motorola flip stand with "ESP" smart charger, and a NetGear dual-band wireless router/access point.
Droid Turbo (Android Version 5.1) - WIFI works fine at home and seems to work other places. I have been using it for months at work. Recently I cannot connect. Other people can still connect. I had the connection saved...but even tried deleting it and researching, but it won't locate the server.
Can Anybody please tell me why my MOTOACTV doesn't like to connect to GPS? My distances and times are WAY off. I would estimate that 30% of my runs have connected. I tried today, with a clear shot of the sky without a cloud to be seen and it wouldn't work. I wasn't moving and have the MOTOACTV on my arm. I waited for 2 full cycles while it tried to connect. I am sick of it. The time is set correctly on the unit to Daylight Central Time. It is giving me the correct time. The portal doesn't seem to have the option for a Daylight Central Time. It should still work. I am really getting fed up of the chats with support, only to be told I need to call and have it taken care of. I even told Matt about this a couple of weeks ago. I got no response from him. What is going on with this? When it works, it works well. If this wasn't a gift, I would return it and hope for a better outcome with a new one (no receipt).
I cant seem to get my verbal progress report when i tap my screen.take me though the settings to make sure i havent missed anything before i take it back to the shop?
so my Motoactv broke - I got a new one... went through set up - it included the option to "add device" which I selected my new workouts wont sync to the on line site - wifi works - and I plug it in to sync - both sya successful sync but they dont show up on my account on line?
When I click device update in MotoCast ->I get new software is avaialble for your MOTOACTV.
Current Version: MA 1.6.7 N8 New Version: MA 1.6.13 N8
I press 'Update Now'. A dialog appears Download 0% - then another dialog pops up "The update could not be downloaded. Prease try again. If the problem persisits, please visit our support site. Your device has not been updated."
I have been trying for 2 days with the same result as above. I tried unplugging device, using a different USB port, etc. nothing seems to work.
I plugged in the Moto and discovered that there was a device update. In light of problems I was having (described in a separate thread) I did not have time to let it run. Decided to do so in the evening, but was unprepared for the rigamarole I encountered. The device would not update until I updated Motocast, which took FOREVER. And after all of that, the Motoactv won't even update. The device manager box tells me that my Motoactv is running the most current software version and that that version is N/A. 0 for 2; my device is not running the current version and the version it is running is 1.7.2 N8, not N/A. That is not the version number I saw this morning when Motocast informed me that there was an update available.
Just got in from a run. Device won't sync, just sits there with 'syncing' on the screen for minutes on end. Also, the MA website won't let me into the workout data. It just says 'unable to process request'. Device synced fine Sunday, but not today. First elevation issue, not I can't even sync my workouts or view them.
when i turn on my Nokia 5530 XM i get an eror : "Home screen: function doesn't work on this device" . What's the reason of this error and maybe i could fix it on my own?
I accidentally deleted a workout from the MOTOACTV site but still have it on my watch, how do I get it off after it no longer has that up/down sync icon?
All I get is the windows dialog that asks if I want to view the device as a file system, listen to music, etc. I have uninstalled the motoactv software, plugged my device in and re-installed the motoactv software, but I still only get one icon (the one with the two right angles) that says it is version 1.1.70 MotoCast for Windows. The device is updating the web with my workout fine..
Im on the verge of getting the MOTOACTV but wanted to double check something.Will the device only pair with Motorla phones? I have a blackberry and want to make sure I can send and receive calls using the device paired via bluetooth.
Anytime I finish a workout I usually power down my device because it usually drains pretty quickly on "standby" (doesn't last more than a day or two if I'm not using but don't power off). However, two times in the past couple of weeks I've taken my device out and it was always on. I suppose it's possible I forgot to power down, but I doubt I would have done this twice in the past few weeks.
Last night was my 2nd night to use my new MotoActv (still on the fence w/ it) and upon scrolling through my music there were new songs on it that I have never seen before, were not there on the first night, I haver never bought, etc. Where did they come from? Very frustrating when I am trying to work out.
When i click on the Recent Workouts tab (under Workouts) it just has the loading icon (the guy running) and that's it. I'm no scientist, but i'm pretty sure that's not how it should be working.For any developers looking at this, i've attached the outgoing and incoming data which includes the error that is occuring.I've checked with a friend using their account and they don't have the same problem -- it works fine for them.
Motoactv website seems to be showing all the information about the run (distance, time, pace) correctly. However the map is totally wrong. It only shows about the last mile of my run. Anyone know if there is any way to show that data?
These images show that the summary just above the graph doesn't match the information shown or the map. This happens with every multi-activity workout.
Is anyone else having an issue with calibration for pedometer or running? It always starts saying you will walk/jog/run for two minutes, but my Motoactv has been inconsistent, mostly counting down from 120 but then ending with around 70 or 60 seconds left.