Motorola Motoactv :: Shake To Wake And Calorie/Pedometer Don't Work
Oct 3, 2012
I've been a MotoACTV user for just over two weeks now and woke to find that my shake to wake function and calorimeter/pedometer aren't working. My device is not paired with any phone and because it's new, it's got the most recent s/w already installed. I checked the Wake Device field on the watch and it was set. Am I missing something or is there an exsiting problem for these symptoms? The MotoACTV s/w version MA 1.7.12 N8.
View 1 Replies
ADVERTISEMENT
Mar 14, 2012
I just rollerbladed for 1 hour and 13 minutes, for 8 miles. I am 275 pounds. It told me I only burned 183 calories. That can't possibly be correct. The GPS did track the whole route, and it did get the whole amount of time. What is the issue with this?
I do have my MotoACTV set up correctly with my height, weight, and age.
View 13 Replies
View Related
Jul 17, 2012
I'm a little concerned about the calorie counts it's been giving me; they seem too high. Has anyone else had this issue? Could it be my unit, or was I just underestimating my calorie burn before?
View 6 Replies
View Related
Nov 16, 2011
How to use the device with only heart rate and calorie burn (like weight training or other non-programmed workouts)? I would also like to use it in spin class but the bike don't have any ANT+ sensors - so a heart rate/calorie burn mode would be nice. How to use the device for a spin class? Also, how is the calorie burn calculated? Is it based on height, weight, age, etc. with an algorithim or is it simply based on a typical condition (basically guessing the burn)?Is it possible to upload my New Leaf testing profile to the device?
View 5 Replies
View Related
Aug 14, 2012
How do I remove Pedometer from Motoactv
View 1 Replies
View Related
May 20, 2012
I had 2 separate runs in the same general area today that seem to have had the GPS drop out. Problem being, I thought the pedometer was supposed to take over at that point so that the pace and distance don't get all screwed up. That didn't seem to happen here. I was running an approximately 9 minute pace the whole time, but had it dip down to 17 mins and it would not come back up... I could see this happening for a few seconds, but for minutes at a time? I will attach CSV files for your review.ow could this possibly happen at this point? This is such basic stuff for this watch to be able to do, why cant it hack it? With a pedometer and GPS it should NEVER be this far off. So disappointing.
View 5 Replies
View Related
Mar 15, 2012
Is there a way to reset the pedometer without performing a new calibration?
View 2 Replies
View Related
Jun 24, 2012
Ever since upgrading the firmware on my Motoactv to MA 1.7.2 E8, I've had a problem with the Pedometer.I can't really say what it is doing on a general day to day basis, but when on the cross trainer at the gym it appears to be losing steps - however, it does appear to be counting them.For example, yesterday morning I went to the gym and as usual I set my Motoactv to Elliptical workout and put it in my pocket. When I started, my steps for the day were around 1700.Part way through my workout, I checked my Motoactv and it was showing over 4500 steps so it all seemed to be fine, and it was clearly registering my "steps" on the elliptical.When I stopped, after 1 hour 45 minutes, I checked my Motoactv and it was showing 1600 steps - less than I started with! According to prevoius workouts on the earlier firmware, I'd expect my steps to be approximately 14000-15000 higher than when I'd started after such a workout.All the stats in "Recent" were consistent with earlier workouts of a similar magnitude and time (i.e. distance, calories, avg/max stride rate). Also, if I look on the Motoactv website, I can see my strides being in excess of 14000.This is the second time I've noticed my steps being way off, though I don't always check my steps. However, I'm fairly certain it was working perfectly prior to the latest firmware upgrade. I definitely clocked more than 20000 steps during the day in the past, so if it is "rolling over" back to zero, it wasn't doing this in the past.
View 3 Replies
View Related
Mar 10, 2012
Since update yesterday my pedometer stopped working. if i restart motoactv it work for a few hunderd steps than stops again.
View 15 Replies
View Related
Aug 31, 2012
Being it's synced with my Motoactv, does this mean it's using my foot pod, or the internal pedometer when not in workout mode? I just want to ensure greatest accuracy. If it's not using the foot pod, can it be setup?Also, if I wear my HRM throughout the day, will I need to start a workout to record my heart rate whilst doing everyday activities?
View 4 Replies
View Related
Mar 27, 2012
When the watch is switched on, the "wake up device" function works fine. However,after the watch has been on for a certain period the "wake up device" function doesn't work. Has anyone come across such issue?
View 10 Replies
View Related
May 16, 2012
Problem Description I was in a middle of a workout with the MOTOACTV. It was connected wirelessly to my heart rate monitor. During the workout the UI became high latency and almost completely unresponsive. It would take 3 4 presses to the Power Key to get the device to wake up. When device did wake up, the CapTouch UI would not accept any swipe or touch gestures. I finally was able to power the device down hoping for a graceful reset. However I was concerned that I was never going to get to the point of getting to the power down screen. seen this issue on other Android devices and know that there are times when a battery pull is needed due to a deadlock or a process gone haywire.
View 5 Replies
View Related
Jun 29, 2012
I just purchased the MA device and noticed that while I was out on my first run with it, the workout ended after I paused it. Not sure if I just inadvertently hit 'end workout', but was wondering if the device has a default to end the workout if you have it in 'pause' mode for too long. I only had it paused for maybe 60 seconds while I was waiting to cross a street, then when I hit the button to resume, it said work was already complete.
Anyone know if there is a way to change the settings so it doesn't auto end (if that's indeed what it did)?
View 3 Replies
View Related
Jun 20, 2012
I just got a MOTOACTV last month, use it as a fit trainer and never use the music function. Few days ago I want try listen some music but it can not play! No reaction at all! Also FM radio, show "No Signal". I try reset factory and change the headphone but still have this problem.
View 11 Replies
View Related
Sep 28, 2011
I'm using CardioTrainer. Where I run I can't use GPS, so I use the pedometer feature. It works fine until the screen shuts off. Then the sensor that detects steps seems to also shutdown and stops counting my steps.
View 4 Replies
View Related
Jan 9, 2012
I like the running Pace Zone Feature! It worked for me on the day I did a fit test. I ran 6 miles after the fit test and was able to take a glance at my watch and see the zone I was in. Very cool. I went to the website and tweaked my zones and saved a new template.I can't get the pace zones function to work since then. I'm sure it is operator error.
View 6 Replies
View Related
Aug 3, 2012
Jaybirds work very well with my Motoactv compared to the problems with Motorolas SF600. Playing mp3 I have no problems, but I recently tried the radio function with my bluetooth Jaybirds and it tells me to connect headphones to work?
View 2 Replies
View Related
Dec 21, 2011
Would really like to see workouts tracked that go outside the "canned" activities. Example. I'd really like to track my heart rate and fitness songs through a strength or interval workout.Currently I do not see a way of having the device tarack that information as a "workout" are there any ways to work around the canned workouts to do this?
View 7 Replies
View Related
Jan 2, 2012
When I try to use the radio feature with my jaybird freedom bt headphones and says to plug in headphones to listen to radio. Will this not work?
View 5 Replies
View Related
Sep 11, 2015
I've tried apps and looked through my settings and nothing seems to work either that or I'm over thinking so in turn over looking something....
View 1 Replies
View Related
Mar 17, 2012
First, I'm unable to save a zone template. If I edit the Carmichael zones and hit save, it tells me that's it has saved the template. But alas, it's nowhere to be found. Also, after I hit save the zone resets back to the default (which is incorrect as it has the first two zones overlapping significantly). Take a look at the attachment. I'm no heart rate expert by any means, but are "Recovery" and "Foundation" supposed to overlap as much as they do (why are both of their lower number 87?)? Just looking at this now I realize how little sense it makes. Why does the "Foundation" zone go all the way into "Steady State" I tried changing this and it just reverts back to the original everytime. I'm sure you'll guess my next gripe... yep, my zones are incorrect on my MotoACTV as well.
View 10 Replies
View Related
Jan 2, 2012
I just applied the latest update and after scanning through the radio stations and 28 were identified yet they are not saved, it just goes back to an empty re-scan screen. I cannot set favorite radio stations, clicking on the star above the radio station does nothing.
View 6 Replies
View Related
Dec 8, 2014
Tab to wake up sometimes doesn't work from one time. I should do it twice or more to wake up....
View 6 Replies
View Related
Jun 4, 2012
The sleep button on my iPhone 4 stopped working today for no reason.I cannot press it down anymore. I have never had this problem before.
Info:
iPhone 4
View 1 Replies
View Related
Jun 16, 2012
It just suddenley stopped working? The button works, its not stuck. But the iphone wont sleep or wake? I mean its not a huge deal, I do not really take screenshots but how will I restart my phone? Can I never let it turn off now?
View 1 Replies
View Related
Mar 14, 2012
my sleep/wake button doesnt work anymore. is it still under warranty if its not a year old?
Info:
iPhone 4
View 2 Replies
View Related
Sep 2, 2014
Recently updated my iPhone 4 to ios 7.1.2. Currently my worst problem: instead of going into sleep mode, the phone turns off completely. I then cannot turn the phone back on with the sleep/wake button. To turn the phone back on, I need to do a hard reboot each time by holding down the home and sleep/wake buttons simultaneously. I have tried going into settings/general/reset and selecting "reset all".
Info:
iPhone 4, iOS 7.0.2
View 1 Replies
View Related
Jan 23, 2010
I have purchased Calorie Tracker from App World but it will not download. Have attempted to reinstall numerous times.Shows to be downloading, but does nothing,
View 4 Replies
View Related
Jul 25, 2012
Is it just me or is anyone having problems with data syncing to the Motoactv.com portal today?
View 2 Replies
View Related
Apr 6, 2012
I have been trying to download gold courses for 2 days now and can't figure it out.My device keeps saying "Downloading" and nothing is happening.
View 14 Replies
View Related
Aug 7, 2012
I've owned the MotoActv for two month, I got the mysterious "moisture issues" that everyone seems to be getting even though I've never used it in the rain. But the thing that is driving me nuts is the music. When I hit random shuffle of all my songs, I hear songs I don't want to hear... song that I do not own on my computer. Where are these songs coming from? Today I heard "Boot Scoot Boogie!" I abhore country music as does my wife. Doing a computer wide search shows no evidence that the song exists on my computer. Yet there it is playing in mile four. Other mystery songs have showed up too. The performance music playlist seems to be filled with songs I never heard of, yet evidently I perform well to them.
View 1 Replies
View Related
