I'm using CardioTrainer. Where I run I can't use GPS, so I use the pedometer feature. It works fine until the screen shuts off. Then the sensor that detects steps seems to also shutdown and stops counting my steps.
View 4 RepliesWhich is the best free antivirus program for use on the Atrix.I currently have Norton.
View 14 Replies View RelatedMy Atrix shuts down when it goes to sleep, even on a completely full charge. I have done a factory reset (didn't fix it), hard reset, soft reset and pulled the battery and left it out. The only thing that stops it at times is to reload it through the Motorola Software Update on my PC. After that, it works flawlessly for about a day, then after charging it all night, I unplug it and it starts all over again.
Before it shuts down, (if you can catch it) it vibrates. If you hit the power button really quick before it cuts off, you can see on the screen that it has a low battery warning and the battery indicator will be red and showing it as drained, and the phone will cut off. When you turn it back on, the battery is back to where the charge was before it does the sleep/shut off. This cycle continues until I reload the software, then it works for about a day until I have to charge it again.
I have my screen timeout set at 2 minutes. When using the music player, the screen does indeed shut off after 2 minutes, but a minute or so later the music player stops. If I set the screen timout to never timeout, the music player keeps playing. Is this a problem with all Atrix's or just mine? Also, while I have your ear, how do I actually SHUT THE MUSIC PLAYER? I don't mean just pause the music, I mean the off button?
View 4 Replies View RelatedI have been using the phone for past two weeks and having issue with the fingerprint scanner. The scanner stops working all of a sudden for no reason and then the phone needs to be rebooted to make the scanner function. I updated my phone with the latest patch .83..
View 1 Replies View RelatedI have enabled both the weather and the pedometer on the lock screen and only the weather is showing up. Would like to see pedometer as well. Wondering what I didn't do right.
View 11 Replies View RelatedI got a replacement phone recently and ever since I disabled things and fiddled with my settings S Health pedometer's shoe icon saying "Paused" has been stuck on my lock screen. I don't have S Health or the pedometer turned on or even on my phone. Now my lock screen doesn't tell me what song I'm listening to anymore.
View 2 Replies View RelatedHow do I remove Pedometer from Motoactv
View 1 Replies View RelatedI had 2 separate runs in the same general area today that seem to have had the GPS drop out. Problem being, I thought the pedometer was supposed to take over at that point so that the pace and distance don't get all screwed up. That didn't seem to happen here. I was running an approximately 9 minute pace the whole time, but had it dip down to 17 mins and it would not come back up... I could see this happening for a few seconds, but for minutes at a time? I will attach CSV files for your review.ow could this possibly happen at this point? This is such basic stuff for this watch to be able to do, why cant it hack it? With a pedometer and GPS it should NEVER be this far off. So disappointing.
View 5 Replies View RelatedIs there a way to reset the pedometer without performing a new calibration?
View 2 Replies View RelatedEver since upgrading the firmware on my Motoactv to MA 1.7.2 E8, I've had a problem with the Pedometer.I can't really say what it is doing on a general day to day basis, but when on the cross trainer at the gym it appears to be losing steps - however, it does appear to be counting them.For example, yesterday morning I went to the gym and as usual I set my Motoactv to Elliptical workout and put it in my pocket. When I started, my steps for the day were around 1700.Part way through my workout, I checked my Motoactv and it was showing over 4500 steps so it all seemed to be fine, and it was clearly registering my "steps" on the elliptical.When I stopped, after 1 hour 45 minutes, I checked my Motoactv and it was showing 1600 steps - less than I started with! According to prevoius workouts on the earlier firmware, I'd expect my steps to be approximately 14000-15000 higher than when I'd started after such a workout.All the stats in "Recent" were consistent with earlier workouts of a similar magnitude and time (i.e. distance, calories, avg/max stride rate). Also, if I look on the Motoactv website, I can see my strides being in excess of 14000.This is the second time I've noticed my steps being way off, though I don't always check my steps. However, I'm fairly certain it was working perfectly prior to the latest firmware upgrade. I definitely clocked more than 20000 steps during the day in the past, so if it is "rolling over" back to zero, it wasn't doing this in the past.
View 3 Replies View RelatedSince update yesterday my pedometer stopped working. if i restart motoactv it work for a few hunderd steps than stops again.
View 15 Replies View RelatedSometimes, when I am actively using my XPRT, scrolling a web page, or looking at game scores, pretty much any activity I use the phone for, the screen will just shut off. I have the delays set very high, like 2 minutes or more, but the screen still gets in the mode of just wanting to be off.
So, the screen shuts off, I have to press the button on top the phone, then swipe the little slider to get back to what I'm doing. Then within 1 or 2 or 3 seconds it shuts off again. The happens for 6 or 8 or 10 times, then things return to normal. Then I can use the phone as normal again and the screen stays on.
Being it's synced with my Motoactv, does this mean it's using my foot pod, or the internal pedometer when not in workout mode? I just want to ensure greatest accuracy. If it's not using the foot pod, can it be setup?Also, if I wear my HRM throughout the day, will I need to start a workout to record my heart rate whilst doing everyday activities?
View 4 Replies View RelatedMy Admiral's screen intermittently shuts off when I'm working on the phone, and I have to use the screen/power key to turn it back on. Also, the backlighting on the keyboard seems to be hit or miss as well. I'm wondering if this has anything to do with the proximity sensor?
View 15 Replies View RelatedRight after I have rebooted my Droid my sound continues when the screen times out.However, somewhere along the way something changes and when the screen times out the sound goes too.
I can't force the sound to stay on when the screen times out after that; unless I got through the tedious process of shutting down and rebooting.
I've been a MotoACTV user for just over two weeks now and woke to find that my shake to wake function and calorimeter/pedometer aren't working. My device is not paired with any phone and because it's new, it's got the most recent s/w already installed. I checked the Wake Device field on the watch and it was set. Am I missing something or is there an exsiting problem for these symptoms? The MotoACTV s/w version MA 1.7.12 N8.
View 1 Replies View Relatedi have the timeout for my screen set for two minutes. this is normally good as my major use is checking e-mail or surfing the web. if i am watching a Internet video longer than 2 minutes or using navigation the xoom shuts off and i have to press the power button and then play (if i was watching a video) to continue for another two minutes until it shuts off again. here's my question.. am i missing something in settings or do i just have to adjust the screen timeout time every time i want to use an app that doesn't require me touching the screen for 2 minutes?
View 6 Replies View RelatedThis is something I've dealt with and have tried to address ever since ICS was released. Each night I set my phone into the standard dock (non-usb one), and the bedside mode comes up as it should and the screen dims after a minute or so as it should. It is usually around 10 to 15 minutes after I dock the phone that the problem occurs. What happens: The bedside alarm app is removed from the screen, revealing the home screen in landscape mode. My screen then times out (shuts off) as it should, because the bedside alarm clock is not the active window. My alarms work fine, but I can't see what time it is when I wake up before my alarm goes off unless I turn the screen on and look at the lock screen. I've tried factory resets, fxz file, removing all apps from recent apps list, resetting the alarm app data, nothing seems to.
View 9 Replies View Relatedjust down loaded the new update, all is good except- there is now a problem. While placing an outgoing call the screen/keyboard fails illuminate. There's no way to end or stop any phone calls. The screen will reactivate once the other person ends their call. Also does the same thing calling voice mail, etc.... no screen available to enter security codes
View 2 Replies View RelatedI have the Atrix for many months now and only witnessed a few small bugs. However my wife bought the Atrix2 and she says the screen shuts off on her when the she touches the screen. It is not a timeout setting either. It is REALLY bad when we are laying in bed and she holds the phone and i try to touch the screen...boom screen shuts off! She turns it on and i touch the screen...boom the screen turns off again. Is this some kind of security setting?
View 9 Replies View RelatedI have this weird thing going on with my Atrix. I've had it for about six months and it was fine until now. What happens is that the touchscreen stops responding after it is turned off (pressing the power button) and back on. I can't unlock the phone, but the volume buttons are still responsive and I can still turn off the screen. If i reboot it (by removing the battery), it boots up just fine, with the screen working perfectly. It'll sometimes stop working when ending a call. The weird thing is that it doesn't happen everytime I turn off the screen, and when it happens, if I turn it off and back on it sometimes starts working again. It also seems to happen more frequently when the battery is low.
View 1 Replies View RelatedOk so I read the webpage on how to root the Aria. I am still clueless to how to do it though.How do you get the one program on a sd card, where do I get that program?Can anyone help me out. I want to get some of this ATT bloatware off of the phone to clear up some space and also to maybe overclock it safely.
View 6 Replies View RelatedDevice info Your carrier: telus Model info and OS version: 6.0.0.344 bold 9700 alright so i woke up today with my phone charging and it was a white screen everything still works fine on it i used a program to take a screen shot of the phone and everything is working fine i can make calls and everything ive tried:battary pull reloading soft ware wipeing it
View 1 Replies View RelatedThere is some news flying around about a possible hardware replacement, or recall for storm 2's with the know dead and mulitple click issues.
bbleaks.com/2010/03/carriers-getting-new-screen-improved.html
Its just for verizon, but I am wondering if anyone else has heard about this?, Also I am wanting to find out if this will be strictly through the carrier, becuase I have a unlocked vodafone I use in canada, hopefully I can go direct to RIM.
i will be browsing / using apps / unlocking my phone and the screen will just crap out and turn itself off. a little red light seems to appear at the top of the phone, which i'm not sure what that means, but it keeps doing that. i've turned the phone on and off a few times this morning, taken the battery out and let it sit for a minute before putting it back in and rebooting and it still does it.
View 1 Replies View RelatedProud Atrix owner since 2/22/11...Had to replace my Atrix today with another one because the top 1/4 of the screen became unresponsive to touch. It was a sad day. I didn't do anything to it either. Good news...My backup Pro...was able to put all of my texts back into my phone...not in perfect order...but they are there. The call log was replaced! The desktop was put just like I had it! It was a pretty good move...just lost my pictures and had to redownload everything
View 1 Replies View RelatedThis is a formal request for Motorola to add the CRT screen off animation into the gingerbread build for the Atrix 4g. Im not sure if this is a google flagship fucntion, but I think if we got that with the next a future update, it could even boost future sales of the device. There are hundreds, if not thousands of people out there that want this feature. However, many have never have even seen it in person. Let us be the ones to show it off to our friends, so they in turn can envy us. That would create desires in new potential customers that only spending money could fill .
View 4 Replies View RelatedI live in mexico and ordered unlocked atrix through amazon, Got the phone yesterday. charged it turned on. screen keeps going dark, Cant get wifi cant do anything ..home button does not work...can not set up phone, I am familiar with android had a captivate.
View 4 Replies View RelatedJust downloaded Motospeak but cannot get past the screen that says for a list of divices visit then gives the website url.
View 1 Replies View RelatedI don't always get email and calendar notifications (noise and vibrate) on my atrix 2 when the screen is off. If i happen to turn my screen on to make a call or something I will get notifications for emails that have come but did not trigger the notifications.
View 7 Replies View Related