Motorola :: Can't Seem To Get Cliq 2 Update To Install / Update
May 29, 2011
looking around here a couple days ago I saw talk about the update rolling out 'soon', and I decided to check my phone and see if it saw any updates. And it did, when I hit check for system updates it finds the one they were looking for testers for a couple weeks ago, only after I hit download (I've done it 3 times already) and it downloads, I hit install, and my phone powers off, it goes to the screen with the little box, and an arrow, and and android guy, and the progress bar only gets about half way before it suddenly reboots its self, and I'm still on the same version, with an update telling me it's available and if I want to download it when I go back into the about phone in settings
View 2 Replies
ADVERTISEMENT
May 2, 2012
I was a part of the testing group and could not get my phone updated through that. Now it is officially out and yet again, I cannot update my phone. Here is the problem once again: I plug my phone into my computer and start Motorola Software Update, which is up to date. It says it is going to update the software on my phone. My phone turns off and a screen comes up on my phone saying it is updating the software. A few seconds later it says the update is complete, and my phone reboots exactly the same. I have tried to update my phone like 8-10 times on different computers, etc. and nothing changes.
View 15 Replies
View Related
Jan 17, 2012
I'm just curious as I have checked for almost a full year now and there is no news about the cliq 2 getting an update, why is that? Also, will the cliq 2 have a chance of getting ICS 4.0 (Ice Cream Sandwhich)?
View 2 Replies
View Related
May 3, 2012
i got to playstore and update adobe flash. it will update it. then when i reboot the update is gone. it goes back to flash 10.2.
View 14 Replies
View Related
Jun 2, 2011
have been having some issues with my Cliq 2 for awhile. A few weeks ago it "ate" almost all my contacts and I since then it wouldn't let me add new contacts. I got a message about not being able to add contacts without an account but all acounts were signed in.So when i saw a new software update was available I was excited and hoping iI downloaded and installed it. Walked quickly through the family room features and then started getting repeated error from voice command (which I hadn't even tried to use). When I pulled the battery because I couldn't stop the error from coming up the phone will no longer start up. It is fully charged and will power up, give me the motoblur graphic and get to the hot pink 'work together' logo and freezes there. I'm totally lost as to what to do. Is my phone dead? What can I do to try and fix it?
View 4 Replies
View Related
Aug 23, 2011
Late in the game, but I just updated my Cliq to 2.1. At first, the calendar was working fine, but now, it is having some issues. When I go into the calendar, it shows me a black screen with two options:"Showing events since Aug 23 2011. Tap for more.""Showing events until Aug 23 2011. Tap for more."Choosing either of those will take me to the Agenda View showing the most current events.But, If I choose to the month view, the date defaults to December of 1969. I would then need to press "Today" so that I can view the current month and year. I have searched around and looks like this has happened on the droid forum, but did not say whether if or how it was solved.
View 3 Replies
View Related
Oct 13, 2011
I bought a phone like 3 days ago and i was trying to update the phone, i tried to up system update to 1.32.24 but it say "The upgrade attempt has encountered an error due to failed log in" i did factory data reset like 3 times and still does work , i even made Motorola blur account on my phone
View 15 Replies
View Related
Jun 4, 2011
I have noticed that after the recent 2.2.2 download all the clock widgets on my Ciq 2 would not update in a timely manner. I tried a few of those. This includes the Motorola Date/Time widget. Many times the time displayed is running 10-15 minutes behind.
View 12 Replies
View Related
Jun 23, 2011
cliq mb200 touchscreen no longer works at all its a *** w/o it
View 1 Replies
View Related
Jun 5, 2011
I bought the Cliq 2 just yesterday after having my contract extended by two years. I am new to Android platform having switched from Blackberry. I was playing around with phone features and noticed that the scene mode in camera which was working yesterday is no longer accessible after the software update.
View 8 Replies
View Related
Jun 8, 2011
So prior to this update you could copy more than one item to the clipboard. In other words as you copied, things would be added to the clipboard one row at a time. When you then tried to paste, you had the option to select which row to paste which save me a lot of time - I could paste a link I had shared yesterday for example without hacing to go back, find it and copy it again. Now that option is gone in 1.1.30 - all I see is an option to Paste , which inserts the last item copied.
View 3 Replies
View Related
Jul 17, 2011
many of my apps will not update now and many more will not install , i have the apk files and they dont install either. also when i used "app saver" to restore my old apps after a factory reset those apps wont show up in the market and i can not update them.
View 1 Replies
View Related
May 20, 2012
Trying to update iPhone 5.1.1 and it says unable to install update. An error occurred installing iOS 5.1.1
Info:
iPhone 4S, iOS 5.1.1
View 6 Replies
View Related
Oct 22, 2012
I received a message on my XPeria Mini Pro about the 4.1.B.0.587 Update. In fact, I can not install it. When I start the PC Companion software, it finds the connected Phone. Then I click on update. In the following window I click "Accept" and then the software should prepare the PC for the update. But after one second it stops and returns to Start without any comment. When I start Sony Mobile Update Service then it checks for new updates. As soon as the check is over, the program terminates without any comment. Is there a third way to upgrade?
My config:
PC with AMD, Windows 7 64 Bit, 16GB RAM
View 1 Replies
View Related
Sep 29, 2011
My phone downloaded the update and restarted. It "installed" the update and restarted again. (Saw the little android and progress bar)
After the restart, a popup came up saying "update failed"
View 10 Replies
View Related
Oct 5, 2011
Trying to install Android update HTK55D via bluetooth connection with Motorola Photon. Update screen comes up and starts - download button is "greyed out" - but nothing else happens. Have let it go all night with no results... Have rebooted and get same results... Am on the road with no other internet connection available.
View 5 Replies
View Related
Oct 30, 2011
I have read the discussions to date and it seems there is no answer for this install update problem or I missed it. what the fix is for this and if there isn't one is Motorola working on one.
View 2 Replies
View Related
Aug 30, 2011
i have a xoom 32gb wifi only device that i purchased from woot.com and i received the update notice to 3.1. i have downloaded and attempted to install several times now, each attempt has failed.
see attached image for error I have tried a Factory Reset (Settings -> Privacy -> Factory Data Reset), as well as factory reset at boot. No success.
I also tried the "wipe cache" command at boot and this did not result in a successful installation either. The only other choice at boot that makes sense is to "install update from usb", and when selected it goes to sdcard.
At this point I am seriously considering rooting, unlocking and then updating?
View 1 Replies
View Related
Apr 12, 2012
Unable to install or update apps. While attempting to update, received the following msg: "Update for xxxxxx could not be downloaded due to error(921)". Xoom WiFi only, Android ver. 4.0.4, Build # IMM76 Android phone is able to install and update apps on my home WiFi network.
View 7 Replies
View Related
Sep 9, 2010
I don't have Internet at home and I've been trying to update to 4.1 manually... But it wont let me! I direct downloaded the correct file, then plugged in my iPhone. I selected the device in itunes10 and the. Held down "option" and clicked "update" I selected the downloaded file and it looked like everything was working. But, then it said that it couldn't install the update because it couldn't reach the apple update server... Isn't that the point? So t doesn't need to hit the server?
View 5 Replies
View Related
Sep 5, 2011
I just got this phone from someone who upgraded up. If I only want to use it for calls and texting and nothing else, should I update from its current system version 1.6 / Firmware version 1.5?If I wanted to do this manually, are system and firmware updates done separately and where are the download pages to do it manually?There are threads talking about how updates slowed down CLIQ MB200 phones. Do they slow down the basic functions of this phone? I see there are Android platform versions all the way up to 3.2. Is version 2.1 the last version compatible with MB200?Some threads compare updating this phone to installing Windows 7 or Vista on older computers - they would slow down basic functions on them so it's really not worth it to update. Is that comparison true when it comes to this first Android phone?
View 2 Replies
View Related
Dec 12, 2011
I have a Motorola Cliq updated to 2.1.5 through T-mobile.Up until this weekend, I had no problem getting Data pushed through whether I was in my area or my boyfriends area (his is non 3G and he does NOT have WiFi) ...I was at his place this weekend, and my Data ONLY pushed through when I was in a WiFi area and I had WiFi enabled.he problem is, now that I'm home IN A 3G AREA my Data STILL only pushes through when WiFi is enabled. I get NO INTERNET CONNECTION at all.I can't even get my phone to be recognized through the Motorola Troubleshooter now when it IS plugged into my laptop via USB ....Hoping to avoid a reset, even though I have everything synched through my Blur acct and Gmail
View 4 Replies
View Related
Jan 3, 2012
I inherited a Cliq 2 from my father-in-law and I have a T-Mobile sim in it right now. When I look at the system version, it is saying 1.1.28. From all the info that I've read, the latest version is 1.1.30. I've tried doing a system update from the phone, but it tells me that I am up to date.
View 2 Replies
View Related
Jul 30, 2012
The screen has been cracked recently, so my brother took it upon himself to buy me a Cliq (MB200) from someone off CraigsList for my birthday. I am not sure if this is the route I would had gone but it's not like he can take it back now. Luckily it is a Cliq with a T-Mobile emblem on it, which is my carrier, so there shouldnt be any problems. And it appears to be in excellent condition.OK, time to transfer the SIM card.First, we cannot get the newly purchased Cliq to recgognize my SIM card. It is an old T-Mo SIM card that has been transferred from A Samsung T-719 purchased in 2007 to a BB Pearl to a BB Curve and then to the Cliq2 bought in 2011. I do have newer SIM cards that have never been opened or activated, so that could be an option. But the SIM works fine in my Cliq2. But in the newly purchased Cliq we immediately get the "Please insert SIM card" message on the screen.Yes, we did do a factory reset and then re-tested the SIM.Wi-Fi works.We were curious if the SIM Card can't be read until we go through the Motoblur registration.Also, can the Motoblur info just be transferred from the Cliq2 to the SIM Card or SD Card so I don't have to login on the newly purchased Cliq?I forgot my Motoblur password and it is registered with an inactive email address, so a password recovery via email is not an option. Should I just open a new Motoblur account? Will it let me connect the same emails and social media accounts as the old Motoblur account?
View 5 Replies
View Related
Oct 12, 2011
i bought a photon at best buy today, carried it around for a while, installed the netflix app, brought it home, plugged it in, and after i tell it to install the system update, it downloads, i click install, and it shuts down immediately, starts itself back up, and then as soon as everything comes back up, i get a message that says update has failed. this has happened 3 times now, downloaded on wi-fi
View 12 Replies
View Related
Aug 24, 2011
I just got an update message for update 4.2. something.. I didnt record the full update number/version.I gave the ok to download and install after reading the warning that it might take up to 7 minutes to complete.It has locked with the red dot "M" logo for 30 minutes.What should I do now? Holding the power button does not turn it off , no buttons get any response. I am about to pull the battery and restart but I fear I might cobble up the update and cause more harm.
View 2 Replies
View Related
Sep 8, 2010
Subject says it all - is there a preferred way to do this?
View 12 Replies
View Related
Nov 19, 2011
I Check on SUS and it says I have the latest - but I last updated about a monnth ago. I have an xperi_ pro MK16, I have build number 4.1.B.0.43, And I am not that "tech savvy"
View 6 Replies
View Related
May 9, 2012
Can i install the update from my iphone 4s without pc ?
Info:iPhone 4S, iOS 5.1, ios 5.1.1
View 2 Replies
View Related
Dec 7, 2010
My phone keeps telling me to update my software but when I try to do this with pc companion it just says "unable install or start phone software component updates" why?
View 1 Replies
View Related
Jan 14, 2010
Want to install the latest update PR.1.1 that came out today, but despite removing every application installed on there (something that I only did 4 days ago with the last update, then spent time re-installing them), I still can't install it.
I've re-installed Conky and can see that I only have 33mb free in Root, but have no idea what's in there filing it up. Does anyone have any ideas?I can't flash it through NSU, as that says that I have the latest version at the moment already, when I know that to not be the case...
View 12 Replies
View Related
