Motorola Atrix 4G :: Ringtones Through Jawbone Icon Headset?
Aug 23, 2011
I'm still looking for some answers to get my ringtones back into my Jawbone Icon headset. I've had the same headset paired to a Razr v3xx whereupon I was able to hear my various ringtones I had set for certain contacts so I could tell as to whether or not I needed to answer right away or not without having to look at my phone. I liked the fact that I was able to hear these tones in my headset as well as the phones speaker. Now don't even try to pass this off as the headsets' software, as I ever had changed anything until I paired with my new Atrix. my thoughts are that this is a softwarwe engineers code changes for this particular phone
i have recently purchased it two months back.I tried finding the compatibale headset to atrix but didnt know which one to buy..I am looking for wired headset.Is there any motorola atrix headset or any other motorola headset with 3.5mm is fine?And how to control the headset button...default it gives voice commands...IS there any option in 2.3 so that we can change the headset control. Like when i press the call answer button with music player on, it would change the song....pause play...kind of controls...
I just got this phone and I finally figured out how to get all my contacts off of my sim card....now I need to know how to get all my ringtones off of my SD card. I have looked and cannot figure it out. My songs automatically downloaded but none of my ringtones. I am not in the mood to buy ringtones again. The ones I have cost a fortune.
found a BT that has been reliable and successful with streaming music from the Atrix? This is something that would be extremely helpful for me in the enviroment that I work in. I have to use a headset that I plug into the jack on the phone, but it can be clumbersome at times and annoying.
My phone call volume is fine but media playback volume is WAY too loud! Even with the phone volume and headset volume at the lowest it's too loud. This has only been a problem since the Gingerbread update. I tried the H17 on another phone and it works fine. Definitely a post Gingerbread issue.Anyone else have issues with this model headset or any other since the update?
the headset jack resetting to the max volume everytime the wired headset is unplugged and plugged back in? I am having this issue when using the wired headset for voice calls.
i've bought a non-Moto headset with remote control to test if it works with my Atrix. Some buttons work but not as they are labeled... I wonder if anybody knows which resistivities applied to the 4pin connector pins correspond to which command in the phone.
the headset icon stays even if i remove the headset. I tried to restart and restore my phone but if i plug in the headset again and removed,the head icon stays again.
I'm often getting this icon and I can't understand why. It causes problems as sometimes (when the icon is displayed) I can't answer my calls. Does anyone know why this happens and how to stop it?
Have a Atrix HD, about 6 months old. Today I went to make a call using a headset plugged into the headset jack, and nothing happened. The headset was not recgonized and all sound continued to come out the 'speaker'. (Either in "loud" speaker mode, or normal mode.) Tried another headset, same problem. Researched and went through the "check for debris and clean the jack" process with no improvement. Contacted Motorola support and they ended up offering to have it shipped to service center for repair/replace, but that means 7+ days without the phone. So I thought I'd check and see if anyone else has had such a problem.
Anyone else ever have headset jack "failure" like this on an Atrix unit? Oh, it also fails with a music player, or any other sound source, so it appears to be a general unit failure, not specific to any one app/function. I looked all over for some kind of setting to enable/disable the jack, but found nothing of use.
I have tried to pair my Jawbone earpiece. All my other BT devices can pair but the Motoactv does not seem to be able to find it.how I can make The earpiece discoverable?
Ive tried a few different things I have read by putting my ringtones in a ringtone folder or adding .nomedia to the folder they are in but my ringtones always show up in the stock music player. I have my ringtones in mp3 format should they be in a different format
I just went through with the newest update (system version 4.5.91.MB860.ATT.en.US) and I am now unable to assign ringtones for contacts, and can't change my regular/universal phone ringtones to anything other than the defaults. Anybody else having these problems, or know how to get around them?
Because of a number of unpleasant changes in behavior in my Atrix over the past few weeks, I decided to perform another factory reset, clearing all internal storage and starting from scratch - this is the 6th one of these I have performed since the GB update. For whatever reason, after this reset the e-mail "postage stamp" icon that had mysteriously turned gray after the GB update and remained gray in the subsequent 5 resets has turned back to red. I didn't change my Motoblur account, use a different e-mail account, or do anything consciously different. This behavior reminds me of how much more difficult it is to engineer software than virtually any other manufacturing discipline. It is impossible to test every combination of conditions through which a piece of software must behave correctly (or at least not catastrophically). I am curious to see what other behaviors may improve or decline after this reset.
just updated to gingerbread and this new icon showed up. it looks like a phone and a simplified keyboard right under it.... tried searching for atrix status icons and gingerbread status icons but didn't see this one on there.
I have an icon flashing on top of screen that I cannot identify. It is not listed as a standard Motorola icon. Appears to resemble a bulleyes and the center of this flashes.
I am unable to locate my ADW launcher icon. I did note that ADW is still running however. Following a web search I learned that I could disable the phone's original launcher. I'm not savvy enough to know what the launcher is or how to do that.
After the recent update, I'm noticing a few things fixed and a few things broken. On the things broken, one is the battery charge indicator in the upper right hand corner of the GUI next to the time.At 29% it shows half full. At 49% it shows at around 75%. If you go to the Settings, Battery & Data Manager, that will show properly at 50% for instance, while the icon shown in the GUI next to the clock is not showing half green but more like 75% greenI have a nifty widget called "Tiny Battery Widget" that gives a more accurate representation (which is consistent with the battery charge indicator found buried in the system's menu under "Battery & data manager" ) and also verifies the small icon at the top right next to the clock is overly optimistic.
Atrix 2 - after downloading Android 4.0.4, green phone icon is missing. The app icon is not in any tray, any screen, or the generalized app listings. However, it is listed as running when you select "Manage Apps." Doing a force stop, then rebooting unit does not restore the icon, even though it is listed as launch by default. Technically, app is "Phone", version 4.0.4-67.21.125. How can I restore it? (Workaround - select People, then small icon phone/dialpad.)
I thought my problem was a battery enhancer app, so I installed it. That didn't fix it. I used to connect my Jawbone to my Curve 8900 with no problems. I was having a problem with an older Jawbone ( the IKON) and so purchased the ERA. They both behave the same way on my Bold.
I have an original Jawbone with an Iphone 3gs with the latest firmware. As far as I can remember, this has always been the case since I got the Iphone, I cannot turn off the Jawbone while on a call. With my last phone (a MAXX VE on vxw), I could just hold down the button on the Jawbone for 3 seconds, the Jawbone would turn off and I could continue talking using the phone.
Now that I have the Iphone, holding that button down does nothing while I'm on a call. I, of course, can switch between the phone and the Jawbone, but I can't turn off the Jawbone unless I go to settings on the Iphone to disable bluetooth.
So my question is: Is there a way to power down the original Jawbone in the middle of a call on an Iphone
how to remove the headset icon from top of the screen. when calling you can't speak to anyone and can only hear the caller when in speaker mode. i've tried a soft and complete reset also
I'm having problems with the audio on my Bold 9700. It's turning off and on every second and there's a flashing headphone icon in the top left corner of the screen. I plugged headphones into the phone for a while yesterday - I'm not sure if that has anything to do with it.
It's really ridiculous that RIM doesn't have actual tech support people that customers can call.
I had my Bold 9700 plugged into speakers and listening to Slacker like I have done in the past. Now when I try to make a call or receive a call the "Headset" icon flashes on and off as tho the headset is plugged in when nothing is plugged into the jack. This overrides speakerphone too. So basically I can receive and send a call but it cuts in and out quickly since it thinks the headset is taking over.
Not sure if this is a glitch or if something happened when listening to music. Nothing looks abnormal when I look into the headset port. I was thinking maybe I should update the software to see if its a software or bug.
I'm having problems with the audio on my Bold 9700.It's turning off and on every second and there's a flashing headphone icon in the top left corner of the screen.I plugged headphones into the phone for a while yesterday - I'm not sure if that has anything to do with it.It's really ridiculous that RIM doesn't have actual tech support people that customers can call.
id like to buy one of those over 3000mah batteries for my atrix 2 , but where i live i can only find this batteries for the atrix 4g and im not sure if it works on the atrix 2.
I have been experiencing a funny problem when charging my N97. I bought my phone in August last year. It had been working fine till now and still is. I really have no complaints when it is concerned to performance and usablity. Initial issues were promptly solved with the firmware updates.
Yesterday night, I found out that I had this problem. When I hooked up my phone with my charger, it did not show any light. I tried to use the charger on another mobile(SAMSUNG) which sports the same USB port as my N97 and it worked ! I also used the samsung charger (though its only 700mA) on my N97 and the charging indicator glowed ! To my surprise, the charger adapter pin that ships with the N97 allowing us to charge the phone with older chargers also allowed me to charge my phone. In short, everything charged my phone(including USB) except the provided charger.
Secondly, of lately the headset has become dogdy. Earlier, even if I ran while having hooked up, the connection was good. Now, even if I move the slightest, the phone looses the connection with the headset and the headset icon disappears. Then I need to plug it out and the plug it in again for about 2-3 times to get the icon to reappear. Now if anyone can explain to me why this is happening and the solution to it, I would be really happy.
My Motorola Atrix or Computer has a Problem install the ADB Interface so there for my phone wont connect to my Computer.I have a windows 7 32-bit operating system.I have tried installing Drivers Manualy, tried using the PDAnet Solution, tried unistalling all USB Ports, tried applications to help.
