Motorola Atrix 4G :: Failed To Boot 0x1000?
Oct 3, 2011
First let me say that I have done a search and I have read the threads that are the exact same issue as mine. The difference is that I have no idea what to actually do about my phone. Background - when gingerbread pushed to my phone something went wrong (although it was plugged in at the time) and basically my phone reboot itself in the middle of the install. The phone no longer works. When this happened (a few months ago) I had to have a phone immediately as I was heading out of town for a few days and had to have a phone to be able to get in touch with my pregnant wife if need be.Needless to say this is now my "backup" phone that is 10x better than the current phone I am using and I would really like to get it fixed somehow.
I have tried RSD lite. I have tried the motorola software update program. I have tried using the factory cable that was sent in the box. I cannot get the phone to recognize via usb so I cannot move a software to the micro usb card.I cannot access any of the options for the "no os detected" screen that appears. Most of them say that the battery is too low to flash.
View 10 Replies
ADVERTISEMENT
Feb 4, 2012
I recently got a Motorola Atrix from a friend who used it for 3 weeks and then upgraded to another phone.
When I got it, after doing a factory reset thing, things were fine. But a few hours later after starting up I started to get this message:
svf:105:1:2
Failed to boot 0x1000
Entering NVFlash Recovery Mode
It appears for 2 seconds and then it's gone. I can't seem to do a hard reset; holding any of the volume buttons with the power button to turn it on just gives me this same message.
View 3 Replies
View Related
Aug 1, 2011
this is begining whit firmware update gingerbreadmy atrix show in the display svf :105.1:2 failed to boot 0x1000thats al in the display that i see
View 2 Replies
View Related
Aug 7, 2011
Motorola Atrix
svf :105.1:2
Failed to boot 0x1000
After showing this error my phone switch off. Its happened when I try to update my phone to gingerbread.
View 1 Replies
View Related
Dec 2, 2011
I was having wifi connectivity problems and my phone was really slow and the screen wasn't as responsive as it used to be. I restored the phone a couple times but I didn't help at all, i even went to AT&T but the guys couldn't help me much but they tried to. As I was searching I found the--Removed-- It gave a failed error and when trying to reboot, it gives and 0x1000 error.
View 1 Replies
View Related
May 11, 2011
This morning my phone said it needed to do an update. So I hit update. about a minute later the screen went black and the motorola symbol popped up in the middle...than in the upper left corner it says Failed to boot 2 starting RSD mode......It will not do anything. I have taken the battery out several times but nothing.
View 1 Replies
View Related
Aug 2, 2011
I tried to do the update from morphine website and when it supposedly finished it rebooted into a failed to boot screen and then turns off. So what do I do now can I fix it or get a new phone?
View 3 Replies
View Related
Dec 4, 2011
What do I do when my screen says failed to boot 1. I've been on new software for several months and have not dropped my phone.
View 1 Replies
View Related
Jul 22, 2011
I'm completely stock. Never unlocked any bootloaders or flash anything that messed with the system. I used the Motorola Update software to check for new update and install it. After a reboot, my phone displays the following message "Failed to boot 4" and I can't get the phone to get out of it. The only way I can turn the phone off is with a battery pull. I was on a stock 1.8.3 before this mess. What can I do? Is this a bug in the OTA update?
View 3 Replies
View Related
Apr 30, 2011
My WiFi Xoom cannot boot due to Error "failed to boot lnx 0x0004". I use the following command to update MZ604 image,after reboot, there is red line "failed to boot lnx 0x0004". PC cannot find the device when I use fastboot command after boot in "Starting Fastboot protocolsupport".
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
View 2 Replies
View Related
Dec 4, 2011
So yesterday my phone's fingerprint scanner began acting up. It would think I was swiping my finger when, in reality, I wasn't and saying It couldn't identify my finger. After a couple restarts, the fingerprint scanner doesn't work at all.I decided to go the route of a factory reset through the android recovery mode and wiped the data. After this, I select reboot now and all I get is a black screen with the green status LED stuck on.
View 8 Replies
View Related
Jan 18, 2013
I just got my phone three days ago. It is rooted. I attempted downloading an app called beats audio installer. Everything looked like it installed correctly, but upon rebooting, my phone remains stuck on the motorola logo. I have tried forcing it to power off, but upon turning it back on, it stays stuck on the m logo. I have tried recovery mode, even wiped all my data off hoping to remove the corrupt file, (I have everything backed up). Nothing. I've already gone through the menus, to fastboot it, reboot it, or reset it. Anything I select results in the black screen with the motorola logo.
View 1 Replies
View Related
Dec 23, 2011
I was using my phone to play coin dozer, while it was plugged in to the wall to charge when it wented compeletly black, hit the power button thinking it had gone to sleep, won't start back up, unplugged it, and replugged, duel core graphic came up, goes to battery graphic says 0% then 5%, then shuts off, it was at full right before it crashed/died.
View 5 Replies
View Related
Dec 4, 2011
I like being able to connect my phone to my laptop and the Motohelper system is a bit clunky but gets the job done.But it isn't a daily thing that I do. It isn't even monthly. It's just occasional.So how can I stop the Motohelper software from loading every time I start my computer? Is there a way to just start it when I need it? Turn it off when I don't need it?
View 2 Replies
View Related
Dec 29, 2012
I let my phone's battery run out, after plugging it in the the charger for about two minutes, i turned it back on, and my phone has been stuck on the AT&T Rethink Possible boot screen. I have done a batter pull, and still nothing
View 2 Replies
View Related
Aug 13, 2011
Today I noticed that if I take photos using the camera shortly after the phone has booted they are not stored on either the internal storage or external SD card even though it looks like the photo was taken.
View 4 Replies
View Related
Jul 14, 2011
When I first purchased my Motorola Atrix the biometric scanner worked just fine. I found it to be a hastle and disabled the feature.
View 2 Replies
View Related
Oct 28, 2011
Just today at lunch I couldn't open my camera. I then powered my phone off and then on again and the camera was fine.
View 7 Replies
View Related
Dec 18, 2012
I have tried to update to Jelly Bean 4.1 but every time after I download and try to install after the reboot it says "Update Software Failed" I have tried resetting the phone back to its factory settings clearing out all data and still the same issue.
View 5 Replies
View Related
Jun 21, 2011
This is my second Atrix. It is failing to turn on its' Bluetooth radio. I go to Settings > Wireless & Networks > Bluetooth (and Bluetooth Settings) and try to turn Bluetooth on. It indicates that it's turning on Bluetooth and then it fails, returning to the "Turn on bluetooth" message. I've rebooted, done a battery pull, tried to turn it on from Airplane mode...everything short of a factory reset (because I really really really don't want to set this thing up from scratch again!).
View 4 Replies
View Related
Oct 14, 2012
I keep getting an error message that the ICS software update has failed. The download process will finish, it will stop a little into the installation, restarts the phone and says the update failed. Is anyone else having this problem or know of any way that I can get the update to install?
View 5 Replies
View Related
Jul 8, 2011
I have the Bell Mobility Atrix. For the most part it works fine. However, lately, this is what's going on. First I should mention that I have the Android Twitter app (from Twitter) installed on the phone and I can log in to Twitter, send/receive messages just fine with that. If, however, I go to Accounts > Add Account, then select Twitter in the Motoblur section (where all the other social media icons also appear), enter my credentials, I get a message stating Success!, Then, if I go to Messaging from the Home Screen, I see the Twitter icon, however it has a yellow exclamation point through it, and the message "Failed Connection".
So I cannot see/read/send messages to/from my Twitter inbox using the Universal Inbox (again, Twitter works just fine through the regular Android Twitter app). I have done all the normal troubleshooting, i.e. removed battery & SIM card, replaced them. Uninstalled and removed my accounts, rebooted phone. Reinstalled app and also re-added my Motoblur Twitter account, and each time it says "Failed Connection". I don't see online where I can configure my Universal Inbox accounts, only on the phone.
View 2 Replies
View Related
Oct 30, 2010
I have an Xperia X10 since July on Vodafone UK. It is (was) running the latest SE firmware, but is now 'bricked' - I learned this term while googl-ing for the problem, but all the mentions involve 'debranding' or installation of unofficial (unauthorised) firmware releases - and I haven't done ANY of that.
The story in detail:
1. In recent days I noticed some glitches in the performance of Android Market on the phone: some downloads were reported as 'unsuccessful' and had to be repeated. This happened both with new apps and with updates. On occasions a reboot was necessary for downloads to start happening normaly again.
2. Today (Sat 30-10) this went to extreme: NO download from the Market was possible at all, each time it stalled forever. As explanation, an error message started coming up: "The process com.google.process.gapps has stopped and needs to be force-closed". No rebooting would solve this. I cleaned several caches (after reading various forums about the error)
3. I decided to reinstall the firmware, hoping to fix the Market performance. Backed up all my data and connected to PC Companion. In the first phase it reported that I "already have the latest version", but I wasn't after an update, so I went on to Repair / Reinstall.
4. The download went smoothly and the installation started well, proceeding to near-the-end. THEN, PC Companion reported: "The installation was unsuccessful, try again". I tried - several times, and the result was the same. Decided to return to my existing installation and seek other ways to repair that 'com.google.,..' process.
5. On attempting to boot, I saw that dreaded YELLOW TRIANGLE with no explanation, and a dead phone not responding to any controls. Had to turn it off by removing thebattery..
6. Several re-installation attempts with both Companion and SEUS also failed, and I am stuck with a useless brick
View 9 Replies
View Related
Feb 5, 2012
I updated my phone using the PC companion and this crashed half way through. I now have a phone that will turn on but on the loading screen is stuck wiyth a frozen yellow screen at the bottom half of the screen. it states:Repair your phone software You can perform a manual phone update to repair the software even if the phone doesn't start or can't be found by PC Companion.
View 3 Replies
View Related
Jun 1, 2012
my yahoo mail account was recently disabled. i tried many times to login with my correct login info but i keep getting the same response...... "login to this account has failed, please try again"
View 1 Replies
View Related
Jul 1, 2012
I left my phone to charge one night before going to bed (pulled out the charger when it finished). The next morning the phone had shut down by itself and when I tried turning it on I got white lines accross the screen. That happened for a few more times (sometimes blue or green or red lines), and after I removed and put the battery back in the following has been happening since then : Starting the phoneWhite screen with Nokia logo shows upMessage "Phone start-up failed. Contact the retailer". Phone hangs. If I press the shut down button, lines appear and fade out before phone shuts down.
I tried the hard reset method, but either I am doing it wrong, or it just doesn't apply here. I tried connecting it to my PC, but it is not recognised (probably because a message to select PC Suite doesn't show up). The phone is a few months outside warranty, so it is not financially wise (or viable) to send it for repairs. I am an advanced user and I'm willing to try any flashing utilities guides to restore it to working condition. Could it be the battery needing a switch? I tried removing the memory card & SIM, but the problem persists.
View 1 Replies
View Related
Oct 4, 2013
So I attempted to do a full wipe/hard reset on my Nokia 1020.. I thought it was working until it restarted and now goes to a WINDOWS BOOT MANAGER screen. Am I completely screwed now? I don't understand how I can't even force-reset the phone. This is really upsetting and I don't know what to do.
View 13 Replies
View Related
Sep 19, 2012
id like to buy one of those over 3000mah batteries for my atrix 2 , but where i live i can only find this batteries for the atrix 4g and im not sure if it works on the atrix 2.
View 7 Replies
View Related
Apr 25, 2012
My Motorola Atrix or Computer has a Problem install the ADB Interface so there for my phone wont connect to my Computer.I have a windows 7 32-bit operating system.I have tried installing Drivers Manualy, tried using the PDAnet Solution, tried unistalling all USB Ports, tried applications to help.
View 1 Replies
View Related
Oct 11, 2011
Will the Lapdock (and other accessories for that matter) work for the new Atrix 2 coming? I've only used the Lapdock lightly and it will be a real shame if it and the other accessories I've purchased over the past year won't work with the 2nd gen Atrix.
View 2 Replies
View Related
Jun 28, 2011
I want to synchronise my Motorola Atrix directly with Outlook on my laptop.How do I do it? Purchasing some application s/w is OK as long ad it works.
View 8 Replies
View Related
