I like being able to connect my phone to my laptop and the Motohelper system is a bit clunky but gets the job done.But it isn't a daily thing that I do. It isn't even monthly. It's just occasional.So how can I stop the Motohelper software from loading every time I start my computer? Is there a way to just start it when I need it? Turn it off when I don't need it?
View 2 RepliesI have tried to install the motohelper 6 times now and every time it stalls on Found product:{F75371B8-7095-F5B4-78BF-DC4E1D2120B7}
View 15 Replies View RelatedDoes your PC need these drivers to properly connect to your XOOM via USB cables?Motorola USB Drivers (for Windows®)This USB Driver is used for connecting your Motorola Mobile Device or tablet to a Windows® computer via a USB cable in order for the computer to recognize the device.Supported Products This USB Driver supports most Motorola Android, Motorola OS, Motorola Linux OS, Motorola iDEN, Motorola Symbian/UIQ, Motorola Windows Mobile® and Motorola i-mode devices. In addition, this USB driver now supports the Motorola XOOM™ tablet.
System Requirements:A 32-bit or 64-bit version of Windows 2000®, Windows XP®, Windows Vista® or Windows 7® Operating system.You must have Administrator permission to install this driver.
Notes:We recommend you reboot the system after installing the USB Driver.Download Motorola 4.9.0 Driver with MotoHelper* * MotoHelper is a PC application that keeps your Motorola device drivers up-to-date. Additionally, on supported devices, MotoHelper notifies you of software updates when they become available for your device and can automatically launch Motorola PC applications such as Motorola Media Link and Moto Phone Portal upon device connection to your PC via USB.
So yesterday my phone's fingerprint scanner began acting up. It would think I was swiping my finger when, in reality, I wasn't and saying It couldn't identify my finger. After a couple restarts, the fingerprint scanner doesn't work at all.I decided to go the route of a factory reset through the android recovery mode and wiped the data. After this, I select reboot now and all I get is a black screen with the green status LED stuck on.
View 8 Replies View RelatedI just got my phone three days ago. It is rooted. I attempted downloading an app called beats audio installer. Everything looked like it installed correctly, but upon rebooting, my phone remains stuck on the motorola logo. I have tried forcing it to power off, but upon turning it back on, it stays stuck on the m logo. I have tried recovery mode, even wiped all my data off hoping to remove the corrupt file, (I have everything backed up). Nothing. I've already gone through the menus, to fastboot it, reboot it, or reset it. Anything I select results in the black screen with the motorola logo.
View 1 Replies View RelatedIve got a Motorola Atrix on T-Mobile UK. When using webtop and the firefox browser I sometimes get directed to the mobile site rather than the full web site of certain pages like Facebook and Twitter. I'm guessing this is not supposed to happen. Is there a way to change the User Agent so it loads up full webpages?
View 2 Replies View RelatedI was able to connect to my macbook pro a few time last week, randomly, as i was having trouble getting motocast usb to open past the "loading content" screen. No it won't get past that at all, stuck on this screen for hours, rebootd phone, mac, reinstalled motocast. I've seen other having this load content issue also, how can we fix this? I'm using the motocast mac version downloaded from the website.
View 1 Replies View RelatedThis morning my phone said it needed to do an update. So I hit update. about a minute later the screen went black and the motorola symbol popped up in the middle...than in the upper left corner it says Failed to boot 2 starting RSD mode......It will not do anything. I have taken the battery out several times but nothing.
View 1 Replies View RelatedI was using my phone to play coin dozer, while it was plugged in to the wall to charge when it wented compeletly black, hit the power button thinking it had gone to sleep, won't start back up, unplugged it, and replugged, duel core graphic came up, goes to battery graphic says 0% then 5%, then shuts off, it was at full right before it crashed/died.
View 5 Replies View RelatedI tried to do the update from morphine website and when it supposedly finished it rebooted into a failed to boot screen and then turns off. So what do I do now can I fix it or get a new phone?
View 3 Replies View RelatedConnecting with motocast? Because I can't at all. Won't synch, freezes at the loading screen. On win7 64bit pro. I've been trying for 2 days. Just about to switch to an iPhone 4s. I have motocast setup and can't synch at all...
View 4 Replies View RelatedWhat do I do when my screen says failed to boot 1. I've been on new software for several months and have not dropped my phone.
View 1 Replies View RelatedI'm completely stock. Never unlocked any bootloaders or flash anything that messed with the system. I used the Motorola Update software to check for new update and install it. After a reboot, my phone displays the following message "Failed to boot 4" and I can't get the phone to get out of it. The only way I can turn the phone off is with a battery pull. I was on a stock 1.8.3 before this mess. What can I do? Is this a bug in the OTA update?
View 3 Replies View RelatedI recently got a Motorola Atrix from a friend who used it for 3 weeks and then upgraded to another phone.
When I got it, after doing a factory reset thing, things were fine. But a few hours later after starting up I started to get this message:
svf:105:1:2
Failed to boot 0x1000
Entering NVFlash Recovery Mode
It appears for 2 seconds and then it's gone. I can't seem to do a hard reset; holding any of the volume buttons with the power button to turn it on just gives me this same message.
First let me say that I have done a search and I have read the threads that are the exact same issue as mine. The difference is that I have no idea what to actually do about my phone. Background - when gingerbread pushed to my phone something went wrong (although it was plugged in at the time) and basically my phone reboot itself in the middle of the install. The phone no longer works. When this happened (a few months ago) I had to have a phone immediately as I was heading out of town for a few days and had to have a phone to be able to get in touch with my pregnant wife if need be.Needless to say this is now my "backup" phone that is 10x better than the current phone I am using and I would really like to get it fixed somehow.
I have tried RSD lite. I have tried the motorola software update program. I have tried using the factory cable that was sent in the box. I cannot get the phone to recognize via usb so I cannot move a software to the micro usb card.I cannot access any of the options for the "no os detected" screen that appears. Most of them say that the battery is too low to flash.
this is begining whit firmware update gingerbreadmy atrix show in the display svf :105.1:2 failed to boot 0x1000thats al in the display that i see
View 2 Replies View RelatedI let my phone's battery run out, after plugging it in the the charger for about two minutes, i turned it back on, and my phone has been stuck on the AT&T Rethink Possible boot screen. I have done a batter pull, and still nothing
View 2 Replies View RelatedToday I noticed that if I take photos using the camera shortly after the phone has booted they are not stored on either the internal storage or external SD card even though it looks like the photo was taken.
View 4 Replies View RelatedI was having wifi connectivity problems and my phone was really slow and the screen wasn't as responsive as it used to be. I restored the phone a couple times but I didn't help at all, i even went to AT&T but the guys couldn't help me much but they tried to. As I was searching I found the--Removed-- It gave a failed error and when trying to reboot, it gives and 0x1000 error.
View 1 Replies View RelatedMotorola Atrix
svf :105.1:2
Failed to boot 0x1000
After showing this error my phone switch off. Its happened when I try to update my phone to gingerbread.
I've been ALL over my phone trying to figure out why my LED light won't stop blinking. It only starts when my screen blacks out, and the phone locks. I've checked calendars/tasks/texts/email/facebook/updates...turned phone off, then back on.
View 3 Replies View RelatedI just got my Atrix today and apparantly was just dumb enough to upload a contacts CSV file exported from MS Outlook to my Motoblur account. It synced with my new phone and made lots of multiple entries, etc. what a mess! Now I'm reading that I can synch a number of other ways including using Windows Mobile Device Center to sync with my Outlook contacts. Now how do I stop Motoblur from synching/updating contacts and clear the phone contacts so I can sync another way?
View 2 Replies View RelatedJust wondering how I can stop the email notification so everytime I get a email from gmail my phone doesn't make noise?
View 3 Replies View RelatedFor some reason, walking to my car this morning, my Atrix began to play an audiobook file (MP3). One that I had listened to days ago.
After months of using the phone and happily listening to audio books this issue has just occured this morning.
I swiped open the phone only to find that the (stock) music player was not actually running. Have not been able to find a way to stop the file(s) from playing.
Observations:
1. rebooting the phone simply restarts the playback of the file from its begining.
2. When the phone is sleeping (screen black), I have no control of the volume (as I would using media player)
3. If I swipe the phone to vibrate or silent, the playback goes silent (though I believe it continues playing)
4. I don't believe I have any ther media players installed.
5. Attempting to play a file in the (stock) music player, results in the file trying to play (the slider moves left to right), but only the audiobook is audible.
6. Have tried cycling power, removing battery, and ManageApps->clearing cache, and even uninstalling a number of downloaded apps - nothing helps.
7. I don't believe my phone vibrates any longer when I receive a notification for incoming text or email.
Having a few difficulties turning some of the annoying sounds off, even though I appear to have found the check box to delete the sounds.1. When the phone isn't in silent mode, how can I stop the typing sound whenever I'm entering text into an email or SMS?I've tried Home Page > Settings > Sound > and unchecked 'Audible touch tones'.Still makes the typing sound.2. Camera - can't stop the camera shutter sound in either silent or sound on mode.Have tried Home Page > Camera > Settings > and unchecked the 'Capture Tone' box. Still makes the shutter sound when taking a photo though.
View 5 Replies View Relatedfetch schedule set to manualunder accounts and my google account, i have data and sync unchecked for everythingwhy am i still getting email pushed or pulled to the phone?the notification is always the messaging icon, so i don't think it's gmail doing it.
View 10 Replies View Relatedi have had my Atrix since Nov. havent had any issues with it, until last week when suddenly the radio would stop working. it says i have signal, but i recieve nothing nor am i am able to send anything (text, email, calls, etc) but i have signal. i havent downloaded any bad apps. i also have Norton to "protect" me against bad apps. is there anything that i can do? i have no warranty anymore so will rooting my phone help? also im patiently waiting for ICS but growing more impatient by the day. wish they would give us a little update.
View 3 Replies View RelatedAfter i took at pic and save it in my gallery then i set the phone down . two minute i look at my phone to surpise igot a a blue n purple salt n peper screen i try to turn off my phone . which i could not until ipull out the battery. Then it start working fine. idecide ibetter hook up my phone[usb] to my laptop. To tranfer the pics n files over to the lap top it said that media link was not working so i try to repair it threw my control panel> program/freature> motorola Media Link Repair which it didnt work. so i unstalll it. rebooted my visa. restall it and it still not working now . It say that the Motorola helper is updated . it work for me3week ago.
View 3 Replies View Relateddoes anyone else have this problem? i would be watching a Internet video and the wifi would just stop working, i would have to go into settings turn it off then on again and once it just turned it self off
View 15 Replies View RelatedEarlier today, while my tour was charging it randomly rebooted itself, but it wouldn't boot all the way - the load screen froze about 2/3 of the way through and then didn't do anything (for like 15 minutes) I did both a hard and soft reset, but the phone still won't boot past that point. Because it won't boot, I can't connect it to the computer to reinstall the OS or anything.
View 4 Replies View RelatedOkay so ever since the last update i have been having trouble with my finger print sensors. After I reboot my phone the fingerprint sensors works fine, but after few hours it would randomly stop working. And so I erased all the data on my phone (Factory Data Reset). It did the same thing. What should I do? I bought my phone on march. So I can not really exchange it?
View 1 Replies View Related