Motorola Atrix 4G :: Can Moto Provide An Update To The Upgrade Schedule
Sep 14, 2012
Can Moto provide an update to the Upgrade Schedule? It has been about three months since the last update and a lot has changed since then. We lost one of our favorite Forum Managers and probably many other Moto support staff. As we only have two more weeks in Q3, i have a feeling that the Atrix ICS upgrade has gone yellow or red status.
With all due respect, how about someone updating the cycle chart. It's been about 29days now(but who's counting). Seems ICS has been pushed up to Moto XYBoard 10.1; per rumors/leaked info and official sites, etc. They were doing good there for awhile, what happened? Surely the Forum Manager is not responsible for this too!!! Or did Motorola dispose of this part of the team/section too!!!
i have a stock AT&T Atrix shipping version Blur_Version.4.1.26.MB860.ATT.en.US. im planning to SIM unlock it and send it to the Philippines. Is it possible to update to version Blur_Version.4.1.57.MB860.ATT.en.US to Blur_Version.4.1.83.MB860.ATT.en.US and to Blur_Version.4.5.91.MB860.ATT.en.US here in the Philippines? what should I do?
My Motorola Atrix or Computer has a Problem install the ADB Interface so there for my phone wont connect to my Computer.I have a windows 7 32-bit operating system.I have tried installing Drivers Manualy, tried using the PDAnet Solution, tried unistalling all USB Ports, tried applications to help.
I see the list of differences here, but when it really comes down to it, what are the differences that I will *see* and *experience* by getting a Q9C? I don't use the PIM or Microsoft Office functions much. I would love to have true push e-mail. I only have POP3 and GMail IMAP accounts, no MS Exchange. I don't care about Internet sharing.
I can't seem to get my phone to communicate with Moto Cast USB. I use Zumocast for wireless, but I wanted to use Moto Cast to sync my music and videos over USB. When I plug the USB in everything starts up automatically. A screen pops up and tells me its preparing my device, then another screen pops up telling me to wait while it loads content. However, this second screen has a large yellow triangle with an exclamation in it and lists things to try if you are having connection issues. I have tried every USB option I have on the phone, it seems to force the connection back to USB mass storage, so I assume that is where it needs to be.
I recently bought an iPod Touch and love it. (No, I don't want to buy an iPhone). I really liked my Moto Q, but then bought a used Q9C because I thought that it, along with a Cradlepoint PHS300, would allow me to utilize my iPod Touch when no hotspots were around.Well, so far no joy, but that's another story (and several threads).The question here is:
1) If I upgrade to a Touch Pro 2 (or other SERO-compatible phone), will I have an easier time "tethering" the iPod Touch? I've already sunk $100 into the PHS300, so if I act quickly, I can return the PHS300 and get the Touch Pro 2 for "only" another $100 or $200.(I do NOT have "phone-as-modem" [PAM] on my plan)
2) If I say 'forget my SERO' and get an Android phone, how will I fare?
Moto Phone Portal - when I choose "Compose" a new SMS and click "send to" if I try to drag a contact from the list at the right nothing happens - they can't be dragged, and if I try to copy and paste the contact's number - when I click paste the number shows momentartily then disappears! Useless... IE 9.0.8112.16421, Windows 7 x64 pro SP1
Why isn't Phase 3- Testing ever identified. It seems to be either Phase 1,2,4 but never 3. I would like to know what phones are being tested,then at least gives you a better ideal of whats going on and possibly when or if it will be updated.Don't put (Phase3) if your not going to share the info/status!Does "soak testing" equal/ represents "phase 3-testing"?
My xperia neo SI number is 1246-9893 purchased in UK and using in India right now. Some how I was managed that PC Companion recognizes my neo tried for update.After multiple error messages from PCC i.e "unable to connect to server" it showed software is upto date.I searched other thread and SI number is still not exits.Would like to know delay of providing 4.0.4 update for some SI numbered phones are because of considering fixing bugs raised by users who has updated their neo phones?It seems people are facing issues from every corner of phone with ICS update.Are these things are considered while providing ICS update for remaining NEO users ?
When will you provide Windows 7.8 update for Nokia Lumia 800? It is not available on Zune and also the website (url..) does not mention anything about Windows 7.8
The update started in June, 2012 and its end October now. How long will it take me to get ICS on my phone or should i stop bothering coming to this forum for update !
I'm currently using my atrix 4g outside the usa and im also using a simcard from a different provider (a local provider in the country im at) My question is when ICS soon becomes available, will i encounter problems upgrading via OTA? if yes how can i upgrade to the official ICS OS?
there is update for my phone my present is this Andriod 2.2.2 there is up date for this and it only can be download from a WIfi connect. my wifi connect is low or not here is there a different way to get in my phone?
I've set my location service for "high Accuracy" and still have to manually reset the location (and, often, force a reset) when I go from one place to another. This is silly and downright annoying. What else can be done?
The Root Certificate on my boss's Moto Q is invalid now and wont' update his phone.He has never used a data cable to sync his phone. Is there a way to update activsync on his cell or do I have to do it on his desktop?
The Root Certificate on my boss's Moto Q is invalid now and wont' update his phone. (microsoft exchange 0x80072f0d)He has never used a data cable to sync his phone. Is there a way to update activsync on his cell or do I have to do it on his desktop?
i am user of Motorola Atrix 4G.each and every thing which we need is available in the smart phone.but recently i heard about the cancellation of up gradation of android 2.3 to 4.0.A single core phone with less ram then the atrix that came out around the same time that has 4.0.4 while Atrix 4G is Dual core phone why Motorola stuck it on Gingerbread?me and my friends which are using Motorola Atrix 4G are very disappointed to hear about this cancellation...we dont want to change this awesome cell phone only for this reason.its our humble request to take back your decision and launch the up-gradation of Android 4.0 for Atrix 4G.
After a recent upgrade I noticed I cannot initiate a call via my bluetooth with the phone locked. I was able to do it with the earlier version. Using Plantronics Pro bluetooth. Is this a proprietary block to aftermarket bluetooth devices?? Is there a setting I am missing. Oh, I checked the box under Location and Security for Bluetooth Bypass, which, I thought would have taken care of the matter since it directly addresses the issue, and is new to the list.
My wife received the notice today to upgrade to GB OTA. She accidentally hit download, but must have been on Edge signal. The down load is at the very beginning, but is asking her to connect to wifi to finish the download. Is there away to cancel the download to upgrade later? I tried powering off the phone and going into the phone status menu with no luck.
My Atrix 2 (on AT&T) operating system was upgraded to 2.3.6 this morning and since then it has been continuously rebooting (going off then on again) every few minutes. I have removed the battery and replaced it. It still did it. I have NOT done a HARD reboot.
I am also getting the "Process system is not responding" error message and a blue bar that says that it is having trouble connecting to the network.
UPDATE:
After hours of rebooting, (I had it charging throughout the time) it has stopped and is acting "normally". I am worried that it will start again and I don't have a fix.
Here I am, 2 weeks later and it started continuously rebooting again. No new updates, no new apps, no new anything. What I did notice was that the battery was below 20%. I have plugged it in and will wait to see if it stops by itself again. The fix described below is requiring too much from a non-technical. I do not have Motoblur. My calendar and contacts are backed up to my gmail account and LOOKOUT.
It continued to reboot for over a day. I went to the AT&T store. They gave me a new phone!
Is anyone else have erratic signal (dropping to Edge more and/or lower bars of 4g) after the ICS upgrade? Also when it does switch to Edge the AT&T in the upper left goes away for as much as 5 seconds--and during that time the phone has nothing at all--and does the sam thing when it comes back. I've done and FDR and cache clearing during the upgrade...just trying to see if I'm the only one or not?
First off, let me just say that I am very pleasantly surprised at how well the ICS upgrade went for my Atrix2. First off, the upgrade itself went smoothly and I lost no data. Second, the phone seems much snappier in all respects. Third, I like some of the new features that ICS provides.
One question I do have is whether it is possible to change the applications that are available on the lock screen? For example, I use a popular third party app for my camera (CameraZoom) and it would be nice to be able to access it from the lock screen instead of the stock camera.
what's the verdict on the voice quality with noise suppression set back to "normal"? People that I've called seem to think it's acceptable now (haven't been asked to repeat myself), but if asked to choose, they do still believe that the "off" setting provides a better sounding voice, i.e. less muffled.
Since upgrading to the latest firmware version, I have experienced a number of issues. Before I begin, I will say that the phone has never been tampered with, and I have only used stock ROMS. A portion of the screen is unresponsive to touch while in portrait mode. The unusable portion covers about 20% of the screen, and begins about 20% of the way down from the top. Basically, this means that the third row of shortcuts (from the bottom) are unusable, cannot be moved, etc. Turning the phone into landscape mode renders the previously unusable portion (now a vertical stripe along the left side of the phone, if the buttons are on the right) responsive to touch again. Certain keys in the multi touch keyboard do not respond while in landscape mode. The "C", "X", and "D" keys no longer work in landscape mode. For approximately a month, the "R" key did not work in either orientation, though it has inexplicably begun working in both orientations.I have also experienced general stability issues. The phone has turned off a few times, on its own, as well as shutting down facebook when toggling between messaging and chat.
I have had my DX2 for roughly three weeks, and for the most part, aside from some testing issues, it has been pretty good.With all of the information I've been reading, the OTA rollout of Gingerbread came out to the X1, but not the 2.That said, when are the updates going to come out for the 2? the fact that the companies are taking care of the earlier phone models, showing reward for loyalty, but the individuals who upgraded to the newest hardware are stuck waiting.Does anyone know when, or if we are getting the next OS?Are we moving directly to Honeycomb?I moved to a newer phone in lieu of rooting my DROID phone, and I'm happy that I did, but I am getting a little impatient.Also, I have no exposure to MOTOBLUR.Does my phone have it? Is it something I have to download? I've heard mixed reviews, but I would like to make the determination myself.
if this happened as a result of the system upgrade (to 4.5.91.MB860.ATT.en.US, Android version 2.3.4), but I surely noticed many contacts on my phone are messed up. Many names, phone numbers, email addresses etc are all mixed up together.