IPhone :: I Faced A Screen Says "!9D/JC" That Blocks The 4s To Access
May 26, 2012
Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
my phone blocks and unblocks without me pressing the button. sometimes it blocks for about 20 minutes and there is nothing i can do. i just have to wait. sometimes im typing a message and it keeps blocking and unblocking.
1. While others are saying that their phone has got faster, I feel my phone has become sluggish, especially the detailed menu moves with quite a number of jerks.
2. The phone had rebooted a number of times after the upgrade. No problem. But sometimes, on opening an app, specially the weatherbug (from Market) or Maps, the phone reboots. It happened once on pressing the infinite button on the timescape page of a contact. I have uninstalled the weatherbug but cannot uninstall the maps. However, this rebooting is happening quite a number of time.
Why are these happening and what to do? Also, the phone Firmware is 2.1 Update-1. Will there be another update?
I added a ms exchange account from my company and now the options to use a pattern for unlock are greyed out. Also under owners, it shows that exchange account.
Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
My phone was working good. I tried to update the software using SE update service. When I press C and connected the cable the software checked connected phone and replied product can not be identified, remove the cable and reinsert the battery. I did so. But now phone is not working when I try to switch it on, the screen just blinks with a light but no text on the screen. I tried to flash the phone too but it is also not wokring XS++ shows something link this.
20:14:53| XS++ v3.1 (Darwin) Ready ! 20:14:53| Executed on Microsoft Windows Vista 20:15:03| 20:15:03| Attempting to open the interface... 20:15:03| 20:15:03| TURN OFF PHONE! 20:15:03| Hold 'C' button on phone and connect phone NOW. 20:15:03| You have 30 seconds... 20:15:03| 20:15:03| Baseband ID: 8040 20:15:03| Protocol Version: 3.1 20:15:03| 20:15:03| Sending db2010_cid00_prodid_p3l.bin... 20:15:03| Applet ID: 061113 1250 ALUCXC125872_COMPACTPRODUCTION_ID_LOADER P3L 20:15:03| This is a PRODUCTION_ID loader 20:15:03| Activating GDFS... 20:15:03| Phone name detected! 20:15:03| 20:15:03| Profiling SEMC phone... 20:15:03| Platform: DB2010 20:15:03| OTP CID: 49 20:15:03| EROM CID: 49 20:15:03| EROM Color: Brown 20:15:03| IMEI: 35255701xxxxxx 20:15:03| Phone ID: K750 20:15:03| Region: APAC_1 20:15:03| CDA: CDA102337/101 R5A 20:15:03| Firmware Version: R1CA021 20:15:03| EROM: n/a 20:15:03| Ready for operation! 20:15:32| Custpack information 20:15:32| Custpack: APAC_1 (CDA102337/101) (K750) 20:15:33| Generic(non-branded) custpack: Yes 20:15:33| Allowed languages: en, id, ms, tl, vi, zs, 20:15:33| 20:15:35| 20:15:35| Sending db2010_cid49brown_flash_r5a.bin... 20:15:35| Applet ID: 060316 1339 104_DB2010_FLASHLOADER_R5A_CXC1326738 20:15:35| This is a FLASH loader 20:15:35| Now flashing firmware main... 20:15:37| Flashing c:usersfais@ldesktopk750_r1ca021_main_eu_1_cl_red49.mbn 20:15:37| Header type: BABE 20:15:37| 288 flashblocks
I have a Samsung Galaxy S5. Its not rooted. But I am running Nova Launcher as my default launcher. It causes my lock screen to kinda glitch out. The letters and numbers on the pin lock screen are turning into solid white blocks. I know if I restart my phone, it fixes it. But I'm just curious as to what causes it.
Very often my Iphone 4s (with full coverage and 3G signal correctly dispalyed) loose connection to the internet, then it continues to look for 3g connection for a long time with no joy (so it never switches automatically to Edge...) and by then it can't do calls (if I try calls ends immediately...) neither sends sms. It stays blocked, restarting sometimes doesn't work, the only solution I've found so far is to witch off/on the 3G function. After that off/on, iPhone starts immediately to work fine again, in 3G modality too. I'm not 100% sure, but I noticed this problem only after updgraded to iOS 5.1. Any way to figure it out without disabling/enabling 3G all the time?
I have been recieving a lot of annoying calls from softwares like Skype. I want to block them so, is there an app that distingushes between calls coming from land lines and cell phones and between VoIP calls and blocks the VoIP ones.
I have a iphone 3g and I am having big problems accessing my apps. Everytime I go to use a app e.g facebook or ebay the scrieen goes black and then goes back to the home screen. It also seems to be taking forever to got to make a phone call. What can I do as one of the main reasons for getting this phone was using the apps
Upgraded phone from Samsung Galaxy S4 to Samsung Galaxy S6. Incoming TXT continues to work normally, but I cannot send an outbound TXT while VPN is connected. If I disconnect from VPN, TXT works fine again.
Same carrier - Verizon. Same messaging app - Samsung Messaging. Same VPN provider and account. Using OpenVPN on both. Also tried the VPN Client that PIA provided -- same results.
Same results whether I am using WiFi, or if I disable WiFi and only use Verizon normal wireless. Wife's GS5 using same OpenVPN and same SMS app and same network works perfectly.
I contacted my VPN provider, PrivateInternetAccess, who promptly blamed my Wireless Provider, Verizon. They stated that I had to tell Verizon to provide a "NAT unrestricted IP address".
On my lock screen and on some of the other screens on my phone instead of text I am getting large blocks covering the text. This goes away for a short period after restarting but always comes back after a few hours.
I just completed a run and the first part (1 mile or so) is completely off. The blue line marks where I actually ran!! I haven't had any problems like this before.
It's not a new thing that my phone restarts alone time to time(!) but recently I notice that any time I touch the 'backup and restore' app to close it from the 'on going' applications (what does it there?), the phone blocks directly and have to enter my code as if it was restarted again.
After a while on my phone, my home screen numbers start to turn into white blocks. Then it starts to spread to the actual words on my phone (i.e. the dates). It is fixed by restarting the phone, but is there any way to fix this properly? Is there something wrong with my phone?
My blackberry storm 9500 comes up with a head phone sign wen ever I make or receive a call. This blocks my conversation with the caller. But when I insert a headphone I can speak with my caller freely...
Following the update to my sony z2, putting my phone on silent causes my sony smartwatch 3 to disable all notifications. I do not want this to happen! I want my phone on silent (not vibrate) but my smartwatch on vibrate and cannot figure out how to do this.
My iPhone 4S is stuck on the log in screen. Out of nowhere has come the voice over telling me every button i push (and announcing every text or notification I get) but when I enter the passnumber it goes no further, I have powered it down several times and reset it a couple of times to no avail, . It receives calls which I can answer, and texts and notifications -- its just I cannot enter it all.
my daughter has an iPhone 4 that is displaying the following message; Â
iPhone is disabled
connect to iTunesÂ
>slide for emergencyÂ
I have tried to connect to iTunes but the phone is not being recognized even though there is an iTunes account for it. The handset is an old one of mine and is around 3 and half years old.
My husband's iPhone 4S screen is damaged and we are trying to backup/sync before it goes for repair. iTunes prompting us to "Respond with iPhone to allow access", but we can't do this because the screen is damaged and there is no prompt to Trust this Computer on the phone screen. Is there any way to back up the phone without actually using the disabled screen?
after i updated my iphone 4 to OS5 i cant directly access my camera from home screen. the doubleclick on the homebutton just makes the camera icon "jump" up & down but no access to the camera. any help?
I don't have quick access to my camera from the lock screen on my new iphone 4s. When double quick on the home button, I have the symbol for the camera but it does not respond when tapping on it. The camera button has two small bars above and two below, every time I tap on it, the lock screen jumps slightly, but no access. From the lock screen i however have access to my music volume. Is the camera access locked?