I'm using version 4.3.5 on my iPhone 4, each time when I connect my iPhone 4 with iTunes, I was informed that IOS 5.0.1 is ready for my upgrate. I couldn't finish the updating for each time I download to around 2xxMB, the connection stop.
Info:
iPhone 4
I cannot begin to tell you the frustrating experience I have had trying to load Ovi Maps 3.03 onto my N97. Suffice it to say that every step of the way has been a painful experience that has seriously threatened my loyalty to a brand that I have always been loyal to. I'm still not there yet. Having followed instructions and loaded the latest version of firmware (20.0.019) via my PC, the automatic loading software then loaded version 3.01 of Ovi Maps (WHY wasn't 3.03 loaded? - it's the latest version!). I proceeded to the Software Updater app on my PC to upload the latest version (3.03). It did recognize the latest version and proceeded to download the software to my PC for installation onto my phone. During the upgrade to my phone, the installation failed and a message appeared "Installation failed 6:19".
I tried to install again, but using the updater app on my PC, it doesn't recognize the need for an upgrade to 3.03 (does it think the upgrade has worked?). Back to my phone to try using the software updater app installed there. It does recognize the fact that a later version of Ovi Maps is available and allows me to try and install it, and a message appears "Installing Ovi Maps with free navigation (1 of 1)", however seconds later another message appears "Result: 1 update failed View update history". Clicking on the View bit helpfully takes me to the log, which unhelpfully shows the message "Ovi Maps with free navigation Installation failed at 6:25" and NO OTHER information about why the installation failed or what to do to recover it. So now I am stuck with an updater on the PC which doesn't recognize the need to do an update and an updater on the phone, which does recognize the need, but fails EVERY time.
After attempting to upgrade software for my iphone 4s via itunes, the upgrade failed and my phone froze with a picture of an usb plug.I even uninstalled security on my computer.
Info:
iPhone 4S, iOS 5.0.1
Can i upgrade my iphone version 3.1.3 into a new version?
Info:
iPhone, iOS 3.1.3
can i upgrade the firmware version 3.1.3 to a higher version?
Info:
iPhone 3GS, iOS 3.1.3
It keeps asking me to update to iTunes version 10.5, I did so for my computer as well as the iPhone. But after that, when I plugged in the iPhone to the computer, it asked the same question again.
Info:
iPhone 4S
an iPhone 4s is given to me as a present. how do i upgrade it from version 5.0.1 to 5.1.1 without it being locked. how do i know it an unlocked iPhone?
Info:
iPhone 4S, iOS 5.0.1
This morning I tried to perform the required update of my iPhone 4S to iOs 5.1. Update failed. Phone is locked up with connection to itunes symbol showing. iTunes does not recognize the phone.
Info:
iPhone 4, iOS 5.1, Upgrade Failed
i try to upgrade ios 5.0.1 to ios 5.1.1 but it failed now what i will do for upgrade it?
Info:
iPhone 4S, iOS 5.0.1
So, the mobileme deadliner is approaching and I need to upgrade my 3GS to iOS 5 and my imac to LION. I've sorted out the iweb histing via another server (phew) and have tried to upgrade to iOS 5 via itunes (10.6.1) but the message I get is that my iphone software is 4.2.1 and is the current version.
Q 1 - how do I get iOS5 on the 3GS?
Q 2 - do I need to load LION on my imac first?
Info:
iMac, Mac OS X (10.6.8)
I got the iOS 6 beta version, my questions is: how to upgrade from the beta to the public iOS 6 version when it comes out?
View 4 Replies View RelatedI have an iphone 3gs, wanted to upgrade it to the newest version, what risks do I run the upgrade as
Info:
iPhone 3G
upgrade to ios but restore failed.
Info:
iPhone 3GS, iOS 4.1
I have iphone4s with iOS5.1, tried to upgrade to 8.1 but forgot to take a backup. Upgrade failed and ask to do a factory resotre and the iphone only shows "connect to iTunes icon"!. How to take a backup in this case or cancel the upgrade. Â It is very important to backup contacts, msgs and notes.Â
Info:
iPhone 4S, iOS 5.1
I was trying to sync my iPhone 3GS when I was prompted to upgrade it. I went ahead and clicked yes to upgrade it. I left the computer and whe I returned about an hour later it asked me to enter my passcode so I did. Then it did its thing for about 30 minutes before telling me there was an unkwown error while upgrading it. During that time the screen on the iphone switched to the image of the usb cord with an arrow poining at the iTunes logo. I restarted my computer and disconnected and reconnected my iphone and now iTunes won't even read it and my iPhone won't do anything other than display that same image of the usb cord and iTunes logo. I'm totally frustrated here. Help! I'm running Windows 7 64 bit, iTunes version 10.6.1.7. I know the cable is fine because it reads my iPhone 4S just fine. I tried restarting and relaunching iTunes and I've also tried holding the power button and home button down for 10 seconds and nothing on the phone's end.
Info:
iTunes, Windows Vista
My iPhone 3gs is stuck in that mode where I can't get pass the white Apple logo even after several hard reboots (holding down the power and bottom center button. After a reboot the white apple logo appears and then it just goes away.I figured out how to get the phone to into recovery mode so that iTunes can do a restore, but I am getting the message that says "Are you sure you want to restore the iPhone to its factory settings" All of your media and other data will be erased and the newest version of the iPhone software will be installed.
Is there any way to do a restore without allowing my iPhone's software to be upgraded to the newest version of iPhone software? I have 3.0 and want to keep it because I use my phone to tether. During the restore phase is there a way to cancel the portion of it that attempts to upgrade my software to the latest software?
How do I perform a software upgrade to 5.0 on a phone that is presently version 4.2.1?
Info:
iPhone 3G, iOS 4.2
I purchased your Nokia 5800 Xpress Music mobile phone and I am trying to update the software/driver to improve 1: Touch Screen scrolling, 2: version of OviMaps, 3: Ovi Contacts, 4: SW application, and 5: WLAN performance.I called technical support for mobile phones, unfortunately it is unavailable according to the recording, i've waited for i think its wrong, but nothing happened the call dropped. The current software version is V31.0.101, Software version date: 16-09-2009, type: RM-356 and it does not upgrade. I have tried using my phone options to upgrade/update the software, this did not work, i have tried using the Nokia Software Updater but it can not find the new version of the software, and I have tried searching for the new software version by using my phone code under the battery and still it can not find the new software version.Has anyone resolve this issue? I need help on resolving this issue.
View 9 Replies View RelatedBoth PC Suite and Ovi were working perfectly until I updated my Ovi to the latest version early this week. Now, whenever I start Ovi, it will crash after 15-20sec if my 5800 is connected ( either bluetooth or USB ). If the phone is not connected, Ovi will stay without any issue. Btw, PC Suite is working fine. Here is the error message pop-up on the screen when Ovi crashed.
"Nokia Ovi Suite 2 has stopped working". A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". No solution is actually provided and the only option is to "Close program". Here is the windows error log :
Faulting application name: NokiaOviSuite.exe, version: 2.0.2.42, time stamp: 0x4b20f226
Faulting module name: QtCore4.dll, version: 4.5.0.0, time stamp: 0x49a63f0a
Exception code: 0xc0000005
Fault offset: 0x000573e3
Faulting process id: 0x1494
Faulting application start time: 0x01ca8e7c0e7fd709
Faulting application path: C:Program FilesNokiaNokia Ovi SuiteNokiaOviSuite.exe
Faulting module path: C:Program FilesNokiaNokia Ovi SuiteQtCore4.dll
Report Id: 8bb5c369-fa6f-11de-85e1-0024e8bf6e9f
Here are the Ovi Suite and Phone firmware details:
Nokia Ovi Suite 2.0.2.42
Nokia PC Suite 7.1.40.1
PC Connectivity Solution 9.45.0.0
Connectivity Cable Driver 7.1.23.0
Nokia Ovi Suite Software Updater 2009.40.0.60128
Maps Service API 3.0.38.0
Nokia mPlatform 2.6.40
Ovi Desktop Sync Engine 1.1.0.77
Operating system: 32-bit Edition
Language: English
Detected internet browsers:
- Microsoft Internet Explorer 8.0.7600.16385 (Default browser)
- Mozilla Firefox 3.5.6
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385)
System config :
O/S : Windows 7 Enterprise 32-bit ( Version 6.1 - Build 7600 )
This is what i did so far :
i) Uninstall Ovi , re-download from Nokia web, reinstall : Failed to fix
ii) Uninstall Ovi and all Nokia related software , clean Registry and reinstall Ovi Suite : Failed to fix
iii) Format and reinstall Windows 7 ( Yes, I did !!! ) , re-download and reinstall Ovi Suite : Failed to fix
I strongly believe this error is caused by the latest version of Ovi Suite, as i have another laptop which running with the older version of Ovi Suite works perfectly with my 5800. I have uninstall the Ovi Suite, I will only try it again when next release is available.
I'm trying to upgrade my iphone software to version 5.1.1 and I receive an error message (-5000) telling me an error occured while backing up my iphone. What's my next step?
Info:
iPhone 4
Can i upgrade my BB Curve 8520 to version 5 from my home..if so how to do it..
View 2 Replies View Relatedis it possible to udgrade blackberry curve 8520 to version 6?
View 1 Replies View Relatedblackberry curve cannot upgrade to new version 5.xxx current plat form is4.6.1.135.. i tried using black berry desktop software but it does not continue upgrade the platform..
View 1 Replies View RelatedCan i upgrade my torch 9800 os 6 to version 7?
View 3 Replies View RelatedCan I upgrade Docs to go version 1.0 to 2.0?
View 1 Replies View Relatedupgrade blackberry handsets via BES v5.
I can find the software to upgrade via desktop manager but i want to deploy this through our BES 5.0.1 also I have BES 4.16 which i am migrating the users onto the new BES via the transporter tool, but i've found our IT Policy creates issues with device version 4.3 and needs to be reactivated when migration is complete. So i would also like to upgrade the devices on the old BES before migrated them across.
So is there a way of upgrading a device version from BES 4.1.6 if so could you also provide instructions? Is there any issues when upgrading device versions? would i need to resend the service book? it policy? re-activation?
Iam a BlackBerry Bold 9780 user and my current device software is 6.0 Bundle 2475 (v6.0.0.546) using Blackberry desktop Software version 6.1.0.35 for windows pc. The BlackBerry Bold 9780 is a unlocked phone using vodafone network at Mumbai India.
I recently installed new official release O.S 6 device update v6.0.0.668 meant for Bold 9780.But when i connected my phone through desktop manager and check for update the desktop manager is unable to find new installed device software on my windows pc. But when i check the supported resources in the desktop manager the new o.s version installed reflects as New installed BlackBerry Software.
I would like to know why current desktop software or manager for my Bold 9780 phone is unable to find new official released device o.s software..I have been able to update my device o.s version when installed on a earlier desktop sofware installed on my windows pc.
I have a software version 5.0 bundle on my celfone then I install GPSLogger, after installing it the GPSLogger wont work on this version 5.0 it to run only on Version 4.6.1 only, then I downgrade my software version to 4.6.1 but I dont like the version 4.6.1 then I upgrade it agisn to Version 5.0, but I cant upgrade it, always keep mee asking that this software is for users with an active Black Berry Subscription, To learn more about BlackBerry service, [url].... What does It mean? I already get Blackberry ID so that everytime I update some software to Appliaction World, what will I do or what what is the best thing to do to I get back to Version 5.0?
View 1 Replies View RelatedMy mobile presently have 4.6 version i want to upgrade my device to present version.
View 1 Replies View RelatedI have been trying to update to ICS using PCC for the last two days ......After the second step ..i.e preparing for update ..it says Update failed . And if i reconnect it says server problems so try again later
View 7 Replies View RelatedI've been trying to get some help online on how to upgrade the software version on my blackberry 8100, currently I'm running version 4.2.1.108, I URGENTLY NEED to know which one is the latest and how to upgrade to it.
View 4 Replies View Related