I'm trying to delete the audio conf file in system/vendor/etc but it won't let me. I'm rooted and running Pure Nexus. Also when I go into the recovery and try to use the file manager it doesn't show me any files in that folder even though there are files in there. I just updated the Rom the other day.
View 2 RepliesI do what I normally do which is go into the system UI media folder and delete the camera click sound after rooting. However this time even with those files completely deleted the camera app still make the shutter sound. Is it like OEM camera apps now where the sound is built into the app and it's not using the folder sound anymore?
View 2 Replies View Relatedon my previous phone (Xperia Z2) I can plug in to my computer via USB and copy files to/from the internal storage or SD card. When I plug my Nexus 6P in to the computer the same way, I just get an empty folder. I can't see all the files on the internal Android file system. Is this normal?
View 9 Replies View RelatedJust got my Nexus 6P from Google UK to replace my HTC One M8 GPE (Been an amazing phone. made better by GPE)
Anyway, I've enabled developer options, but can't for the life of me get System UI tuner to work, the settings symbol just wont spin at all, tried holding it for 2-3 seconds, 5 seconds and 10 seconds.
Also tried this on my HTC One M8 GPE, Nexus 9 and wont work on them either?
Got developer enabled on them all.
Day one powering up the phone there was a system update that that never installed. Since then I have not received any OTA updates. I have had it since October 29th.
I am on Verizon and used my sim from another phone. Concerned that because the first update borked during set up that I am not going to receive OTAs. Seen other listing the same scenario. Factory reset and removing sim in order?
I just got notified that there is an update for January that is available to update.
I have followed the unlocking and rooting guide, and as such I'm worried that updating OTA will break my root.
How can I correctly update to the latest firmware without losing root?
I'm trying to upgrade my SuperSu to the latest beta so I can install Viper4Android for Angler. However, the instructions for SuperSu Beta states "If you are coming from any SuperSU install in /system, you must re-flash the stock system (and vendor and oem, if present) partition contents prior to installing this."
I was wondering if I could get some Nexus 6P specific instructions for doing that without screwing everything up. I assume this doesn't wipe my user apps.
I don't have the system UI tuner Enabled although it is supposed to be enabled already... trying to apply it opens up the "Pure Nexus" app instead of enabling it...
View 4 Replies View RelatedI've had a persistent notification four months for an Android System Update (this is the January patch) that is getting on my nerves at this point.
How do I update the OS without losing root?
So far I've followed heisenberg's guide and have root and recovery.
I'm rooted and not sure how to get rid of it it's always different with each oem...
View 5 Replies View RelatedI am currently running PureNexus and I do like it quite a bit. However, with Android Pay only working on systemless root (which is full of bugs) I am thinking about going back to stock.
My question is, can I install the stock rom, root, remove bloat system apps that I don't want, and unroot?
Any way for me to stay on PureNexus and keep Android Pay working that would be ideal as I am getting fantastic battery life. I am a light to moderate user and I usually have 50-60% battery left at the end of the day.
I'm trying to make changes to the Android/obb folder but it just fails. I tried three different root explorer and nothing seems to work. It has rw rw r permissions. Is it because of systemless root ?
View 1 Replies View RelatedI haven't been able to figure out for sure whether or not it's possible to modify lcd_density without touching build.prop. Past versions of Android allowed one to override build.prop settings using a local.prop file on the userdata partition, but I've been unable to get that working.
It looks like in the past you could put qemu.sf.lcd_density into /data/local.prop, but that's not working for me, nor is any permutation of that variable or location of local.prop that I've tried. Did Google disable local.prop or officially disallow overriding of read only settings?
I am using Windows 10. I have installed the latest Google USB drivers - downloaded and installed from here: [URL] ..... When I plug in, my device is detected, which proves that the drivers are installed.
1) When I touch the Photo Transfer option (PTP), I only get the DCIM and Pictures folder. If I open the DCIM folder, I see thumbnails of all my images. Some thumbnails show the actual image as well. However, when I open them, I get the following error: [URL] .....
2) When I touch the File Transfer option (MTP), I can open the DCIM folder, and I can see all the thumbnails, but I get the same error as above. [URL] .....
In short, I am unable to open any JPEG files created by my Nexus 6P camera on my laptop. I copied the JPEGs to my Desktop, and I tried to open the files, and surprise - I am STILL getting the SAME error!
The error is "Windows cannot find "". Make sure you typed the name correctly, and then try again."
I am able to open TEXT files, and other audio files from my device. It's only the images I have this error with.
Currently flashing back to stock with the steps given by Heisenberg's step by step guide, number 11, how to flash the factory image.
At the command fastboot flash system C:anglerimagessystem.img and it has sat here for over an hour and a half now with the output of writing 'system'. If I'm not mistaken, my phone is basically bricked at this point, as all I have written to the phone right now is recovery and bootloader really, and since I flashed the stock bootloader that means it is relocked.
Is there any way I can unlock it from here and then flash TWRP again, and then restore one of my backups of my 6P to at least get it working again?
I'm running a rooted 6P with TWRP and a custom kernel. Just got a notification for an OTA. Obviously, I can't run this update. How can I disable the update check? I have ROM Manager and know how to disable apps, but don't see any obvious update check system app.
View 2 Replies View RelatedSo I tried to install an exposed module and after reboot exposed wasn't working anymore. through xda searches I figured out my system partition was full. is there any way to make this partition bigger? or Every time i install a module will I have to uninstall a system app to make room?
View 2 Replies View RelatedWhen i put the phone on my laptop its not showing, i picked storage or photo but its not showing any folder, nothing in my pc. Windows 10
It was working for about 5 min then it stopped again.....
I having a problem when I plug my 6P into my iMac. Android File Transfer opens automatically but always gives me the error that my phone is locked.
View 7 Replies View RelatedI flashed Android 6.0 to my Nexus5 and rooted it with NRT. I can't copy a new hosts file to /system/etc because there is to less space. df shows in fact just 4k of free space.
View 4 Replies View RelatedJust played with nexus 6p at a store. Pretty disappointed with the file manager integration with email. I couldn't attach multiple files from dropbox while composing emails. It opens the Downloader and shows dropbox but it only attaches one file at a time (even that failed saying can't attach empty file after repeated attempts)...
I remember you could do the same if you've your files in Google drive!!
I am thinking of keeping my phone stock given (Android Pay, Security Updates, Work requirements for email/messages). Is there any way to update the hosts file without unlocking the bootloader and installing TWRP? I just want to get rid of the ads as they are soo annoying for non-donate/IAP/Pro-version apps.
View 3 Replies View RelatedI was restoring a twrp backup and when it reaches "flashing system image" in the restore process it just reboots. Ive tried a few things but cant get it going. It just bootloops.
View 4 Replies View RelatedDid a swap from a 64 GB 6P to a 128 GB and tried just doing a nandroid. That would've worked but the fingerprint reader wouldn't work without a factory reset. I also accidentally restores the old EFS in TWRP without knowing I shouldn't, but used the original EFS (did a backup on new device before transfer) and restored it back to what came the device.. So I did that and re-did everything and it seemed to have no problems at first. I downloaded some Google Music playlists, Viper4A + busybox, and at some point my phone stopped letting me modify the files.
Camera can't take pictures. Chrome can't download files. I can't add/remove files via PC. I can't modify files via file managers. I tried chmod 777 sdcard but it doesn't fix the problem. I tried reflashing the ROM and all, and did a complete wipe but restored the data (only) from TWRP - so the problem might be somewhere in there. I haven't changed anything from the setup I had on the 64 GB - it was working fine and then just stopped letting me do stuff.
I'll probably try a complete factory firmware restore then flash the ROM all over again, but wanted to see if there was a simple fix first.
When i bought my phone, there are three musics there, since i dont like the songs i tried to delete them but it says cannot delete system file.
View 1 Replies View Relatedwhy there is no way to create a shortcut to a folder or a file inside a folder in your memory card, it seems to me a very important function and yet no one complains but me.I have an office file which I use daily which is saved in E:My filesaccountshomeofficeworddaily.docIt would be great to add a shortcut to that file on the desktop. or at least to that folder.Or lets say I'm listening to an audiobook which is in: E:My filesAudioAudiobookspersonalBorn to runCD5chapter 4.mp3Every time I want to listen to this I have to dig deep in the file manager.
View 5 Replies View RelatedEvery time I create and rename a new folder, it comes back to the default name "Folder", after a system reboot.Any suggestions to fix this issue ? I think it is related to MotoBlur, since I did not find anything related on other phones that don't use MotoBlur.
View 1 Replies View Relateddelete folder in Messages Show Folder?
View 1 Replies View RelatedTake a picture, get error message that states: File system error. A screen pop up and wants me to save to another file? But even when I change the file name error message comes back. I have no pictures saved on the phone and can not find in options how to fix where the picture will be saved.
View 2 Replies View RelatedI am attempting to install a language to my SGS2 but before doing that must ascertain if my ROM is "deodexed" so need to locate a system file called framework. How do I find and access the system folder? navigated the phone via PC but wasn't able to find where the system directory is located.
View 2 Replies View RelatedI was going through my memorie card and I was attempting to delete pictures. I would click delete and the message "the selected file is read only.are you sure you wish to delete file" I click yes and the picture is still there.
View 11 Replies View Related