I'm running a rooted 6P with TWRP and a custom kernel. Just got a notification for an OTA. Obviously, I can't run this update. How can I disable the update check? I have ROM Manager and know how to disable apps, but don't see any obvious update check system app.
View 2 RepliesI'm rooted and not sure how to get rid of it it's always different with each oem...
View 5 Replies View RelatedDay one powering up the phone there was a system update that that never installed. Since then I have not received any OTA updates. I have had it since October 29th.
I am on Verizon and used my sim from another phone. Concerned that because the first update borked during set up that I am not going to receive OTAs. Seen other listing the same scenario. Factory reset and removing sim in order?
I just got notified that there is an update for January that is available to update.
I have followed the unlocking and rooting guide, and as such I'm worried that updating OTA will break my root.
How can I correctly update to the latest firmware without losing root?
I've had a persistent notification four months for an Android System Update (this is the January patch) that is getting on my nerves at this point.
How do I update the OS without losing root?
So far I've followed heisenberg's guide and have root and recovery.
I tried Lollipop for a loooong time and now I'm sick and tired. I downgraded to 4.4.4 but I have a persistent notification in the status bar saying that the new system update to android 5.0.1 is available. But I don't want it!
Is there a way to disable that notification? It is very anoying. I tried to download FOTAkill.apk and put it in system/apps with rw--r-r- permissions but doesn't work. I know that the simplest solution is to install a custom rom but I am very happy with stock rooted + xposed + modules.
I know you can do this with smart pairing of Bluetooth devices but I was hoping to be able to do the same for when I'm playing music through my car's auxiliary jack / over the phone's speakers. I've done a fair bit of googling but haven't found a solution. I use llama app on my phone to trigger events and have tried setting a trigger using the music app to trigger the screen lock to disable but it doesn't work. I'm wondering if it's feasible to somehow trigger screen lock to be disabled when a music app is active?
View 6 Replies View RelatedI am trying to customize the notification LED per app. I've tried 3 tools to achieve this but I am not having success. Both GravityBox and XBlast tools would let me change the colour, but it would never work. All my notifications were still white. Even when I "previewed" the notification light, it would still be white. I also tried light flow, but only a couple of notification lights would show (those were some of the predefined settings). Are there specific hex values I have to use to get it to work? I really want to get this to work ....
View 3 Replies View RelatedI am seeing this issue increasing on daily basis. My phone is usually in my pocked (not in doze) or some times lying around on the desk (dozed/not dozed, but still notification should deliver late). But I have noticed that in both situations, I don't receive any notification until I actually turn on the screen.
As soon as I turn the screen on, notifications start to come in all together.. (around 4-5 notification comes together). It seems that they were pending to be delivered but were never delivered to the device until I woke it up and data connection restored.
I understand that in doze mode, notifications are delayed but are delivered, but in my situation they are not even delivered until I turn on the screen and wait a couple to 5 seconds.
- I am on Stock Android without anykind of root (systemless or regular).
- I don't have any kind of advanced battery saving mode on or app installed (greenify or clean master etc).
- I don't have battery optimization for whatsapp still no notification comes in
- I see it on both Wifi and LTE..
- Cellular notifications like sms, mms or calls are not affected with this issue, they come on time.
I recently unlocked the bootloader and rooted my Nexus 6P and just this evening received an update for the November Security Update. This downloads fine but when the phone reboots to install, it just goes to TWRP and doesn't install.
This is most likely incredibly simple and stupid for me even to ask, but is it possible to install one I've unlocked/rooted?
Just got my Nexus 6P from Google UK to replace my HTC One M8 GPE (Been an amazing phone. made better by GPE)
Anyway, I've enabled developer options, but can't for the life of me get System UI tuner to work, the settings symbol just wont spin at all, tried holding it for 2-3 seconds, 5 seconds and 10 seconds.
Also tried this on my HTC One M8 GPE, Nexus 9 and wont work on them either?
Got developer enabled on them all.
I'm trying to upgrade my SuperSu to the latest beta so I can install Viper4Android for Angler. However, the instructions for SuperSu Beta states "If you are coming from any SuperSU install in /system, you must re-flash the stock system (and vendor and oem, if present) partition contents prior to installing this."
I was wondering if I could get some Nexus 6P specific instructions for doing that without screwing everything up. I assume this doesn't wipe my user apps.
I don't have the system UI tuner Enabled although it is supposed to be enabled already... trying to apply it opens up the "Pure Nexus" app instead of enabling it...
View 4 Replies View RelatedI tried to update my phone to the latest version. I hit install from the notification, my phone reboots goes into TWRP recovery.... does nothing, then I have to "reboot into system" and then the phone boots up like normal. Without updating to 6.0.1.
View 4 Replies View RelatedI'm trying to delete the audio conf file in system/vendor/etc but it won't let me. I'm rooted and running Pure Nexus. Also when I go into the recovery and try to use the file manager it doesn't show me any files in that folder even though there are files in there. I just updated the Rom the other day.
View 2 Replies View RelatedI am currently running PureNexus and I do like it quite a bit. However, with Android Pay only working on systemless root (which is full of bugs) I am thinking about going back to stock.
My question is, can I install the stock rom, root, remove bloat system apps that I don't want, and unroot?
Any way for me to stay on PureNexus and keep Android Pay working that would be ideal as I am getting fantastic battery life. I am a light to moderate user and I usually have 50-60% battery left at the end of the day.
I've got TWRP installed, so OTAs won't install. Is there a way to disable the update notifications or is anyone making flashable zips for them?
View 4 Replies View RelatedI know with my N5 I had constant problems with the "butt dial flashlight" and on of the reasons I got a N6 is that I wanted to eliminate that problem and indeed it was successful. Now with the 6P this morning I noticed my pocket was getting hot and I took the phone out and the flashlight was on..
View 3 Replies View Relatedon my previous phone (Xperia Z2) I can plug in to my computer via USB and copy files to/from the internal storage or SD card. When I plug my Nexus 6P in to the computer the same way, I just get an empty folder. I can't see all the files on the internal Android file system. Is this normal?
View 9 Replies View RelatedI haven't been able to figure out for sure whether or not it's possible to modify lcd_density without touching build.prop. Past versions of Android allowed one to override build.prop settings using a local.prop file on the userdata partition, but I've been unable to get that working.
It looks like in the past you could put qemu.sf.lcd_density into /data/local.prop, but that's not working for me, nor is any permutation of that variable or location of local.prop that I've tried. Did Google disable local.prop or officially disallow overriding of read only settings?
I have rooted and installed TWRP in my nexus 6p and now I have received the OTA update but I can't install it. How can I install it without losing my data?
View 10 Replies View Relatedhow can i disable the vibration of masseges or whatsapp or any notification while i'm in call?
View 4 Replies View RelatedCurrently flashing back to stock with the steps given by Heisenberg's step by step guide, number 11, how to flash the factory image.
At the command fastboot flash system C:anglerimagessystem.img and it has sat here for over an hour and a half now with the output of writing 'system'. If I'm not mistaken, my phone is basically bricked at this point, as all I have written to the phone right now is recovery and bootloader really, and since I flashed the stock bootloader that means it is relocked.
Is there any way I can unlock it from here and then flash TWRP again, and then restore one of my backups of my 6P to at least get it working again?
So I tried to install an exposed module and after reboot exposed wasn't working anymore. through xda searches I figured out my system partition was full. is there any way to make this partition bigger? or Every time i install a module will I have to uninstall a system app to make room?
View 2 Replies View RelatedPretty much as the title says. In Marshmallow, I simply can't find how to disable a user app, I can only see how to disable system apps.
View 7 Replies View RelatedOk so if your phone reboots or crashes, you will need to enter a password or pattern in order for the phone to work. Even alarms and everything won't work until you enter the password. That's pretty bad especially if you NEED an alarm
Some people mentioned turning it on and off and it would give you a prompt to disable it.
How to disable that annoying beeping sound when you change volume or when you hit max volume? it is unbelievably annoying.
View 4 Replies View RelatedI do what I normally do which is go into the system UI media folder and delete the camera click sound after rooting. However this time even with those files completely deleted the camera app still make the shutter sound. Is it like OEM camera apps now where the sound is built into the app and it's not using the folder sound anymore?
View 2 Replies View RelatedWhen I try change Notification LED Color, The primary color "Green" and "Blue" do not seem to work. But when I move the slider down, I get RED, Pink, Yellow and Cyan.
Using Elemental-X 1.02 Kernel and tried with Chroma, Noobuilds and PureNexus.
Can I disable the cell signal automatically on the unrooted nexus 6P?
I know I can pop it in airplane mode and then turn back on bluetooth & wifi but I want to automate this process so that when I'm at work it will toggle the cell radio off.
Yes.. At time my nexus simply loses its notification sounds. Media sounds still works just the notifying sound disappears. And after a reboot it works fine.
View 10 Replies View Related