i am looking to unlock my HD2 tmobile version, without unlocking with custom ROM, so that i can also use it with a different SIM.please let me know has anyone does this with Tmobile version and if yes than what would be the cost of getting it done from someone.
My last Samsung phone was a note 3, 2 years ago. After that I went through some other non Samsung phones so I wanted to check if this was still the same:
I had bought it through my carrier and then downloaded and flashed the factory unlocked firmware via odin to remove carrier bloat.
I am attempting to flash a Samsung T819 unlocked Tmobile branded device. I have acquired the updated firmware for the device and am attempting to use Multi-Loader V 5.40 to flash the firmware. I am unable to force this phone into any sort of boot/recovery mode in order to load the firmware, attempted using OPTI FLASH no success. If anyone has any further instructions in order to flash this device on new firmware
So, I just bought a JB'en iphone 3g tonight.Went ahead and unlocked it using ultrasn0w.Connected it to my mac/itunes, and it asks "an iphone has been previously synced with this computer. setup as a new iphone -or- restore the backup of ***"So, since I had purchased apps using my *** phone (actually was an ipod touch that i got rid of), I'm thinking that I should restore the backup so that I can get my paid apps back for free.
Questions: -will restoring this backup to the new unlocked phone restore it to its original locked state (i.e. will i have to re-jailbreak/unlock)? or will it simply restore preferences, etc...? -otherwise, if i call this phone a new name, is there a way to transfer my purchased apps to the new phone's account?
**** complete edit by fletch33. just too much to edit out to save this post. please see our house rules in regards to dicussion and links to information that alters the system or requires root.there are plenty of forums to discuss this however the Motorola corporate forum is not one of them.
I've got a Bold 9780- t-mobile for about 5 months now that will not come on. The led indicator flashes red 1 pause 2,3,4 fast flashing and then pause 5 and over again. That is all it does. I've been searching every where but I can't seem to find what it means.I got home and have put it on the recharger worked like a charm. After an hour used it for a text message, not a problem. Went to sleep for about an hour and when I came back the screen was black and all it did was flash 1-234-5 over and over again. I have taking the battery out waited ten minutes put it back in and 1-234-5 just the flashing. My phone will not start up. The screen stays black. The flashing is like I never seen before starts with a 1 flash then an interval of 1or 2 seconds then 3 quick flashes again a short interval and another flash. This keeps on repeating. Even when you take the battery out wait for ten minutes or longer it just flashes the same sequences If you link it to computer the computer doesn't reconize him as well. I'm totally lcked out of the device.Flashing is all it does.
I have a Blackberry Curve 8520 and last night the green LED came on and stayed on. This was when I was charging it. I have pulled the battery, I have made sure the options for coverage is set to off. I have also uninstalled any apps I don't need. I didn't install anything prior to this happening and it's draining my battery quite quickly. Even when I switch phone off with the red button, the green LED stays. When I pull the battery, the green LED comes on as soon as I put it back in.
I have had a Pearl 9105 for about 2 weeks now and really liked it until a few hours ago when I found it dead, switched off and not responding to anything. I had been having some trouble with one particular contact - sometimes I wasn't allowed to check our text message conversation and when selecting 'compose SMS' to this person nothing happened. To try to verify this I took the battery out and re-inserted it. The phone started rebooting itself with the black screen and progress bar and I put it in the holster I have for it. However it continued to boot and as far as I can remember it booted fully and I was able to check the conversation that previously has refused to open. However I went for a walk with my family and a few hours later took my phone out to check it and the screen was black.
I left it charging all night last night and at lunch, when I used it for a while showing a photo slideshow to my sister, it said battery was 80%. When I got home I plugged it in to charge, in 2 different sockets, and also connected it to my computer. Nothing happened. Device manager also refused to open (I am now reinstalling to see if this does anything). I have removed and replaced the battery several times, taken out the sim card, tried what other people suggest (starting to charge without battery) but nothing happens. I don't even get flashing LEDs. It is absolutely dead. I am rather cross about the lack of customer service for RIM in the UK. I phoned their only UK number to be told they are closed and dialed 3 for their technical support, first time they hung up and second I got through to American support (yet to see if I was charged for this).
My Blackberry Pearl 8110 that I've had for a while is flashing red and won't turn on. It flashes, pauses, then flashes and so on. I took the battery out last night to check the make of the phone and when I put the battery back in it started flashing and wouldn't turn on. It's been on charge all night, and nothing has happened.
My blackberry keeps flashing even if I have no notifications. It has occasionally happened when e.g. I get a facebook notification, click to open it, then close it before it has fully loaded the comment etc. But it's now happening randomly by itself and I keep having to do a battery pull to stop it
Is there a way I can stop this and a reason this is happening?
I've only had this phone a month and it won't boot up.
Sometimes when I put the battery in it begins to boot up, the freezes and stops. It then intermittently flashes red twice while the battery is in or connected to charger.
Tried connecting to BB Desktop to restore factory settings but can't get it to connect until the device has booted up (whic it won't)...
Any best way or app to get rid of the annoying flashing banner ads that keep popping up at the bottom of my screen that are plaguing my new sony z2 mobile ...
The pop banner ads in question are things like your memory low' your phone going slow' you need this clean master' your battery running out' there's junk all over the place and needs cleaning' your mobile needs boosting etc
I'm new with S6 development. Been playing with SONY devices since 2011. So the question is, can I flash a 920F stock firmware on a 920I device? Will brick my phone? Does it need a special process to make it work? I really want to flash 920F on my 920I and I need to know if its secure.
So I just got the G3 yesterday and finally have it setup. I have noticed though that the notification light does not seem to be functioning. When i receive notifications there is no flashing, regardless of the type of notification. I know the light is not broken because it does flash blue when I knock on the screen, and it also lights red when charging. I downloaded Light Flow to see if I could force the light, but that does not seem to have worked either. I checked to make sure the notification light was set to on under the Display setting page.
I cannot put it any better than that. I flashed it with a prl, directly after an upgrade to the newest Verizon firmware from a 4 button-into-emergency-mode. Laptop battery died (lesson taught, and well noted), And powie. Wont power on, wont go into Emergency mode. Charger, USB Wire, nothing makes any movement, sound, nothing.. bricked. Tried numerous batteries & cords. I have 5 of these and would like to get them out of my hair. I am not attempting to sell them on here, rather just any ideas on how to get these repaired.. if possible.
If someone wanted to change esn on a Sprint HTC EVO would they need to unlock it, flash it, something else or all of the above?Where could one find the TUT, software and hardware needed to make it happen?
Well Basicaly the other night i was using the phone and it suddenly said "Battery Drained, Shutting Down handheld" even though i clearly had at least 50% battery still. Since that point i have not been able to turn on my phone and the LED has been flashing 30 seconds or so while the battery is in or it is connected to my computer. However while i have the device on charge it displays a battery with a lightning bolt through it and then proceeds to a white screen where i can not do anything at all.
I have trying to reinstall the latest OS but that doesnt work, i get to the point where it says "reconnecting to JVM" and then my device's LED starts to flash again and it says that it cant connect to my phone.
Got a C3-01 a couple of months ago, now the USB symbol keeps flashing on the screen and drains the battery every 24 hours. I am also getting this message on the screen....Remove cable or connect a device to continue? Any ideas as all i connect to the phone is a charger!