I am attempting to flash a Samsung T819 unlocked Tmobile branded device. I have acquired the updated firmware for the device and am attempting to use Multi-Loader V 5.40 to flash the firmware. I am unable to force this phone into any sort of boot/recovery mode in order to load the firmware, attempted using OPTI FLASH no success. If anyone has any further instructions in order to flash this device on new firmware
I keep having an error on boot-up where, after the Nokia logo comes and goes, the flashing dot sequence continues indefinitely, for hours; boot-up is never completed. The N900 becomes unusable. While in this "Forever Dots" state, if I try:
- tapping on/off button: flashing dots pause for a moment, then continue flashing forever as before- holding on/off button: device switches off; but when I switch it back on, after the Nokia logo we're back to the forever flashing dots- taking out the battery and replacing: same as holding on/off button..............
I have got a Bold 9700 running with a firmware which does not seem to be branded from a speciel provider, nor locked to any provider. In that case I guess it is a pure RIM firmware which is installed. Does anyone know where I can get the RIM firmwares instead of installing a branded release?
I'd really be grateful to you if could help me out with this. I have got a locked Nokia N91. I went to a local mobile repair shop which claims to unlock branded phone. While it was being unlocked, the phone got some error for some unknown reason and now whenever I start my phone, all it says is ' phone start-up failed, contact the retailer' the repairer says the phone's IMEI is damaged which I have confirmed from various repair shops and would need some RPL file (which I haven't got any idea about) and since Nokia servers are down its not possible right now, he tells me to wait for a bit before the servers are up on the run again. I have no idea if its even true. All I want to know is Can My Phone really be Repaired? And if Yes whats the Criteria for doing so? And if i take my phone to Nokia repair shop. I am afraid they would not fix it since they haven't got a license to unlock branded phones.
I purchased an unlocked 4s to use with my T-Mobile SIM. I had previously been using a 3GS on T-Mobile. Since the update to version 5, apple has removed the settings toggle to disable the 3G radio. This causes a strange issue when 3G is forced to be on, after every call, the radio resets its self, dropping to 1 bar and searching before reconnecting. On version 5.0.1 I was able to jailbreak the phone and install a second party toggle to disable the 3G radio, this restored the normal operation of the phone on the T-Mobile network. But since upgrading to 5.1, I am unable to install this toggle, and it has made the phone really annoying to use. Why has apple removed this toggle? Have they moved it or is there another way to disable it?
ive been reading about this issue with no results, i have an unlocked bb tour from sprint i wanna use on tmobile, everything works, but it doesnt register on the network, so i can use the bbm, i sent the service books, i did everything, i have the data plan, but is still not registering, any help here?
I activated my iphone 4 to tmobile from att. Receiving/making call and text works well. But iMessage and Facetime is not working with my phone number, it just sending with my email address!I tried to change the receiving address to phone number but on my phone (setting-message-iMessage section), phone number bar is showing as verifying; same as on Facetime. Also its gray out and not possible to tab though. And finally verifying status changes to error... Even though my phone number seems as correct format with +1-XXX-XXX-XXXX. I have ios5.1 with 4.12.01?
My factory unlocked iPhone 4S on T-Mobile cant receive Emoji icons from an ATT iPhone. Instead I see a bunch of weird symbols, but the ATT iPhone can receive emoji's from my phone. Also some of my friends have a verizon iPhone and I can receive their Emoji icons, and they can receive mine. At one point I was able to receive emoji icons from ATT iPhones.
I am thinking about buying an unlocked Storm 2 off of eBay to put on t-mobile. I have an 8900 and don't want to switch to Verizon. I was wondering if there were any specs I should definitely be looking for before this purchase. Also is anyone having a problem recently with putting this phone on t-mobile?
Hey guys i have a unlocked bb storm 9530. i am currently using it with tmobile but i cant seem to get the captal EDGE and all the apps that require data are not working such as facebook, ebay etc. is there any OS' that u guys are using that can fix this problem?
After updating my iphone to new os5.1, when I click on a app it keeps flashing the screen black and won't load. I have try several times to download a free app and it does work for a while but then starts to do it again,now that a new phone only 2 weeks old and I got to fill it up with 100's of free app's just to use the paid ones.
i am looking to unlock my HD2 tmobile version, without unlocking with custom ROM, so that i can also use it with a different SIM.please let me know has anyone does this with Tmobile version and if yes than what would be the cost of getting it done from someone.
I've only had this phone a month and it won't boot up.
Sometimes when I put the battery in it begins to boot up, the freezes and stops. It then intermittently flashes red twice while the battery is in or connected to charger.
Tried connecting to BB Desktop to restore factory settings but can't get it to connect until the device has booted up (whic it won't)...
Earlier today, while my tour was charging it randomly rebooted itself, but it wouldn't boot all the way - the load screen froze about 2/3 of the way through and then didn't do anything (for like 15 minutes) I did both a hard and soft reset, but the phone still won't boot past that point. Because it won't boot, I can't connect it to the computer to reinstall the OS or anything.
i have a unlocked blackberry storm for tmobile i can send and recieve texts and the internet works fine, however when i try to call it says no channel/circuit avaliable. i went to india for a few weeks and calling worked just fine there is there any way to fix this problem?
I have an ATT 8520 Curve unlocked to work with a tmobile sim card and have a few questions...Now that's unlocked I cant setup an external email account (hotmail, gmail, etc...) that icon is missing from the setup section. how can I get that feature? can I also use the bbm feature? I added a friend (and vice-versa) but it just stays as pending. is it possible to bbm? for the above 2 do i need to get the bb data plan so they can work? I've read elsewhere that the best way to get the features would be to load the tmobile handheld software. I went to tmobiles site, I enter my ph# - select the 8520 - click on handheld and it takes me to their 'shop for phones' page. I guess they now by the number that i dont currently have a bb. So I tried a friends ph# from tmobile who has a bb and it still took me to the 'shop for phones' page. So I Am hoping it's just a link glitch going on right now. I did download from this forum the 5.0 OS "8520wifiM_PBr5.0.0_rel860_PL5.2.0.47_A5.0.0.509_W ind_Hellas.exe" which obviously is not tmobile. What would loading this different OS allow me to do? Or what features will I have available? and I have lowercase 'edge'.
I like being able to connect my phone to my laptop and the Motohelper system is a bit clunky but gets the job done.But it isn't a daily thing that I do. It isn't even monthly. It's just occasional.So how can I stop the Motohelper software from loading every time I start my computer? Is there a way to just start it when I need it? Turn it off when I don't need it?
My last Samsung phone was a note 3, 2 years ago. After that I went through some other non Samsung phones so I wanted to check if this was still the same:
I had bought it through my carrier and then downloaded and flashed the factory unlocked firmware via odin to remove carrier bloat.
Perhaps I'm just not using the right search keywords, but all the instructions I find aren't working. Mostly because my phone doesn't seem to have the same lines that everyone else is listing.
For example, I typically see this - Profile1 Info 1. Profile Name: T-Mobile GPRS 2. GPRS Setting: +1. Gateway: +++1. IP address: 216.155.165.50 +++2. IP port: 9201 +2. APN: wap.voicestream.com +3. Login ID: anonymous +4. Password: +5. APN: wap.voicestream.com 3. Homepage URL: http://wap.myvoicestream.com/
For MMS, I have these from my E635 as well. MMS Settings 1. Profile Name: T-Mobile USA MMS 2. Server URL: http://216.155.174.84/servlets/mms 3. GSM Setting: (leave blank as mine was) 4. GPRS Setting: +1. Gateway: +++1. IP address: 216.155.165.50 +++2. IP port: 9201 +2. APN: wap.voicestream.com 5. Bearer: GPRS only
Then, trying to follow another's step-by-step instructions, I'm still having trouble following along. Here's my step-by-step to the point that I get lost. Open Menu, tap Settings, tap Messaging, scroll down to Messaging Settings, tap Multimedia Message, tap MMS Profiles... and this is where it gets confusing for me. Whether I try to edit one of the preset profiles, or add my own, these are the lines I'm offered to work with: editing the MEdia Net profile - Set Name Access Name Auth Type User ID Password (user ID and PW aren't able to be edited in this profile) Protocol (either HTTP or WAP) Home URL Proxy Address Linger Time (sec.) Advanced Settings
And in the Adv Settings, I have - Static IP (to check, or unckeck, a box) Local Phone IP (not highlighted, ie, able to be edited) Static DNS (to check, or uncheck, a box) Server 1 Server 2 (neither server lines are able to be edited in this profile) Traffic Class (down arrow sellection, with Subscribed as the only selection available)
And in adding a new profile, everything that was previously unable to be edited, can now be: User ID, Password, Static IP #, and Servers 1 & 2 #'s. I've tried every combination of URLs that I could find: Home URL - http://216.155.174.84/servelts/mms Homepage URL - Homepage URL: http://wap.myvoicestream.com
Along with every combination of IP #s that I could find: 216.155.165.50 10.168.200.50
And I'm striking out everywhere. I'm hoping someone understands the babble I've typed in here, and can make sense enough of this to be able to help me. I don't care about getting on the internet with the phone (no data plan), but I just want to be able to send/receive pics and videos.
I've aquired a N900 with the never ending flashing dots boot problem. I've tried reflashing it a couple of times from my windows 7 laptop but no luck. I did get it to boot into the OS once, but turned it off to insert the SIM and had the same problem again. Is there anything I can try to get this thing working properly again?
I enabled a password on my blackberry 8530 (boost mobile) and after a few minutes it turned off and restarted itself. It loads the bar all the way but then starts over. I have tried a battery pull, and plugged it into my computer both with and without the battery but the DM wont recognize the device. What (if anything) can I do???
So my Lumia 1020 ran out of battery for the first time since I have owned it yesterday, no problem I will simply charge it.
Then on boot it loads the Access Point screen asking me to pick my network (EE already chosen which is correct)... not a problem but why has it done this? It does this whenever I turn the phone off and on again...
I just unlocked my Sensation's bootloader through the official HTC Dev website. I've been trying to do unlock root access as officially as possible and I noticed after unlocking the bootloader the device is still S-ON. Did unlocking the bootloader help at all in an attempt to achieve root? What steps should I take to continue my quest for root access?
I'm using G920I Australia version. I can successfully root using CF-Auto-Root.
But I can not get into TWRP recovery after I flashed that (tried both versions of the recovery) using odin. It stops at the first screen (samsung logo). I tried using adb commond reboot recovery and the hardware key (volum up+power+home), both of them do not let me in to the custom recovery.
I had tried enabled knox before flash TWRP, which made it into boot loop. And then recoveried using the official firmware. Now I can only get into the official recovery.
How to get into the TWRP? BTW, how to backup the pit file using adb? On previous models it was mmcblk0, but Galaxy S6 seems to have changed the memory map to sda1, sda2, etc.
This morning while at work i decided to try another ROM while I had some time. I have been running VRtoxin with no issues as of this morning. I downloaded the latest pure nexus and proceeded to advance wipe everything but storage. I flashed the rom and dynamic gapps. The phone booted up and seemed to be fine until i tried to open a few of the apps i use on a regular basis. When i went to open facebook, hangouts, google plus and some others i would get a notification that unfortunately the app was stopped. I tried rebooting and reinstalling pure nexus and kept getting the same messages. I finally got sick of it and decided to flash my back up i made this morning of VRtoxin. That's when the boot loops started. I have since then mounted system, advance wiped all but storage and tried to flash both VR and pure nexus. Neither will get past boot loop. I have waited 15+ minutes for each.
I recently flashed android 6 then i flashed twrp n then when i flashed supersu my phone is stuck on boot... How can I root my phone when it is getting stuck?
