Huawei Nexus 6P :: Phone Will Not Stop Boot Loop After Flashing
Jan 21, 2016
This morning while at work i decided to try another ROM while I had some time. I have been running VRtoxin with no issues as of this morning. I downloaded the latest pure nexus and proceeded to advance wipe everything but storage. I flashed the rom and dynamic gapps. The phone booted up and seemed to be fine until i tried to open a few of the apps i use on a regular basis. When i went to open facebook, hangouts, google plus and some others i would get a notification that unfortunately the app was stopped. I tried rebooting and reinstalling pure nexus and kept getting the same messages. I finally got sick of it and decided to flash my back up i made this morning of VRtoxin. That's when the boot loops started. I have since then mounted system, advance wiped all but storage and tried to flash both VR and pure nexus. Neither will get past boot loop. I have waited 15+ minutes for each.
View 3 Replies
ADVERTISEMENT
Nov 7, 2015
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
View 9 Replies
View Related
Jan 10, 2016
I had installed a layers theme on my rooted nexus 6p running pure nexus rom. After i rebooted the phone it went into bootloop.
So i got into twrp recovery and factory reset the phone . Flashed the necessary files but it still continued to bootloop. I formatted the internal storage and flashed Chroma Rom but the issue persists.
View 1 Replies
View Related
Dec 14, 2014
I'd just update d phone to lollipop few weeks ago. Ever since then, my phone became very slow n freeze very often. Sometimes it will automatically turned off on its own.
This morning, when I was reading mail n updating some apps, it freezes.
So I went fastboot n try to wipe cache. But it keeps failed to mount cache... Err... Ok. So try turned it off n leave it for a while. After bout 10mins, I try turn it back on, it stuck on d bootloop screen for an hour.
View 2 Replies
View Related
Nov 25, 2015
I recently flashed android 6 then i flashed twrp n then when i flashed supersu my phone is stuck on boot... How can I root my phone when it is getting stuck?
View 1 Replies
View Related
Nov 6, 2015
So I'm on my 2nd day of owning my 6P, and it rebooted without prompting at some point when it was in my pocket. After entering my PIN it just sits there on the animated Google logo, getting pretty hot but never making it past the boot screen.
I'm planning on trying a factory reset and seeing if it happens again since I was going to unlock the bootloader anyway, but I fear I've hit a hardware issue.
View 1 Replies
View Related
Jan 3, 2016
As the title states, I flashed the lastest Cataclysm (stable) and ElementalX kernel(also TWRP asked me that SuperSU wasn't present and to flash it so I did, that might've messed it up), phone booted up fine and set my fingerprint password and everything. I decided to reboot my phone and the phone encrypted itself and now the ROM is force closing and I can't do anything. It asks for a password every time the recovery starts up (I tried default_password, no go) and TWRP won't let me decrypt.
So my question is, is there a way to decrypt without erasing userdata? Would really like to keep my internal storage. I have lots of important pictures and files.
View 5 Replies
View Related
Nov 15, 2015
Then i installed Pure Nexus rom and it was working fine. Then i installed Elemental X kernal, didn't change anything from stock options other than double tap 2 wake, and it would stay forever in the boot animation. Not a boot loop, but the animation with the circles.
So i figured, i had a TWRP backup from before i rooted and all that and restored from that, still same never ending boot animation
EDIT::: I unchecked selinux enforcing but i still get the same issue. I noticed when trying to restore from recovery it would reboot when trying to flash the system, and that it would not be able to flash the system while trying to install pure nexus rom.
View 8 Replies
View Related
Jul 27, 2015
I own a Google nexus 5 for about 14 months now and today he suddenly died on me, I was browsing the web when suddenly the screen went dark, I put it in a charger and it kept booting up again and again, I couldn't even get in some sort of recovery system because by the time I wanted to select something it booted up again. At home I tried everything using NRT (Nexus Root Toolkit) but it keeps saying my phone isn't in bootloader mode which is obviously.. I don't now if it's a software or hardware problem. It is an international 16 gb nexus 5.
View 1 Replies
View Related
Dec 4, 2015
My Nexus 5 device is unable to boot stock or recovery image. It's a locked bootloader, and stock ROM from my wireless carrier. I charged it with a 2 amp capable charger.
Symptoms: preceding the failure , there were strange slowdowns, apps crashing, and inability to charge the battery over the course of a day. When the battery finally died, that was the last I saw my Operating System. Now, when it's plugged in to power, it indicates full charge. If the power button is pressed it will show the Google logo, then cycle back to the battery charged icon. If the power button is held, the battery logo is skipped and Google logo displayed repeatedly. If the down volume button is pressed in addition to power, I get the screen where I can chose the recovery loader, but then the process of Google logo and reboots persist.
If nothing else, I'd like to grab built-in SD card memory contents and strip out a bitcoin key with about $40 on it that I didn't get to back up before it failed.What have I tried so far: basically everything above to generate those symptoms. I also tried opening the back, and pulling one of the top cover and unplugging the battery entirely. No effect.
View 3 Replies
View Related
Mar 24, 2015
I got an OTA update notification for 5.1 I downloaded and pressed install. It prompted me for a restart which i did. My phone has a setting which required me to punch in screen lock code everytime my phone restarts. Now, after restarting, it asks me to punch in the screen lock code. After punching in screen lock code, its stuck in boot animation loop ### Read some posts online and they mention " unlocking bootloader before updating. What is bootloader ? How do i check if my boot loader is locked or unlocked?
I tried to boot in recovery mode and it shows me " No command" ... I wiped cache partition through recovery mode- still no luck. It's stuck in boot loop..
View 24 Replies
View Related
May 17, 2015
Like a dummy I did a one click root I found on YouTube that is for kitkat and I'm running lollipop. Now my device keeps boot looping. I just want to bring it back to stock at this point but it won't go into recovery.
View 2 Replies
View Related
Jan 31, 2010
Phone stuck in boot loop. Have downloaded LGNPST & DLL. LGNPST won't detect phone in upgrade mode. When pressing 5 & power buttons with phone connected to USB port phone goes into verizon download message on screen. LGNPST shows emergency mode with phone book circle highlighted in red. Click on dll tab & choose the ddl. When selecting the PB tab,can't save file in Brew_script as help topic shows. Brew_ script will open, shows brew,then mif & mod. Can't save dll. Any help? No sd card in phone.
View 13 Replies
View Related
Jan 1, 2016
I've been on the Pure Nexus rom for a while now and I wanted to try out the Screw'd Rom. So I downloaded and installed said rom. When It boots up and goes to the setup wizard I get no network data what so ever. I looked through the thread and it said to also flash the update vendor.zip. I did that hoping it would bring back my data but it didn't. So I decided to go back to the Pure Nexus rom, clean install, and again I have no network data. What I could do to get it back? I've tried messing with the APN settings but no dice. I should have made a back up before switching roms but unfortunately I forgot to do so.
View 2 Replies
View Related
Dec 25, 2015
Got my 128 gb 6p last Tuesday, unlocked, decrypted, flashed Pure Nexus, joy no problems. This morning I decided to try God kernel, flashed booted up but I found out the camera stopped working. So restore a backup, no boot, just stays on the Google boot animation. Full wipe, reflash Pure Nexus, still won't boot, stayed on the animation an hour. So I guess I try a factory image next.
View 6 Replies
View Related
Dec 29, 2014
I can't turn it off without it initiating a boot loop all on its own. Every time I press the power button and select "Power Off", it turns off and then about 5 seconds later the Sony screen comes back on, stays on for a few seconds, turns back off and repeats. I can break the bootloop by holding the power button for about 10 seconds and turning the device back on. The consequence is that every time I turn off my phone, it discharges totally!
My phone is NOT rooted and it hasn't been modified in any way.
Compilation number 23.0.1.A.0.167
Kernel 3.4.0-perf-gd4d661a BuildUser@BuildHost #1
Baseband 8974-AAAAANPZQ-00027-12
The issue appeared after a few months of use, in November. I think it didn't coincide with any software update. It's not a brand new phone so I wouldn't like to return it as I already have lots of information in there.
View 3 Replies
View Related
Jan 14, 2015
It has been now 4 months i have this Z2, unitl now everything was working fine, last day the battery drained completely, 0% and it got off. after some time i connected the phone to wall charger using original charger and cable , the screen boots and sony xperia flash and then it get off and then again keeps boot loop,
The RED led comes on and then off , and screen flash SE and keeps looping... i tried making power off holding UP + power nothing works.
i tried connecting to PCC but it also doesnt detect and keep searching phone. i tried repairing using PCC but it doesnt detect phone. i tried holding DOWN volume during power on but green led doesnt come ...
View 10 Replies
View Related
Dec 27, 2015
So my phone got stuck in the infamous bootloop. I am getting a new one shipped to me. I just don't know of my old one is backed up. I don't even think my contacts are. It has an SD card, but I don't think I ever set up a back up for it. Is there any way to back it up now? Sadly it won't stay on long enough to get passed the AT&T screen.
View 3 Replies
View Related
Dec 27, 2015
After flashing viper4android, the speakers are unable to produce sound of any sort. I tried flashing the factory image, and uninstalling the viper driver, but nothing seems to work.
View 3 Replies
View Related
Oct 27, 2015
I've read that some people like to install twrp, root, etc. and then re lock the bootloader. Is there any benefits to doing that? And is there a way to unlock/lock without wiping every time you unlock again?
View 10 Replies
View Related
Nov 24, 2015
I've been running Android M preview (3?) for a while on my Nexus 6.2 months ago my USB-connector of the phone broke and only because I also have a wireless charger I can continue to use my phone.Just now I tried a headphone and noticed that viper4android wasn't working, which it did a while ago.I still had the file viper_aio_fixes.zip in my download folder I used to get it going a long time ago. [URL]..
I booted into recovery, flashed that zip and did a reboot.Now it is stuck at the black screen with only the text "Google" and a padlock.I am able to boot into fastboot where I can go in the several modes including recovery mode (Team Win Recovery Project v2.8.5.0). I don't have any possibility to connect it to my computer using an USB. The device does still have warranty, but I can't miss my phone.
View 2 Replies
View Related
Nov 2, 2015
Okay, so there is no screen protector or anything. Not rooted or unlocked or tampered in any way. I've had the phone for 26 hours and then the following happened:
EDIT: YouTube video added [URL] ..
I pulled the phone out of my pocket to unlock it. I see the lock screen and put in my pin (yes, I see the actual screen and stuff on it. Let me make that clear.) after I enter my pin successfully the screen locks itself. I contacted Google support and they said to factory reset it. I did the full factory data reset in the recovery mode (again, the screen works. I can see everything to do a FDR and I can see the boot animation) and it starts to boot up. Once I see the "welcome" screen it instantly locks itself.
I can hear the audible "latch" locking sound that it makes when you press the power button. I know the buttons are not malfunctioning because they work perfectly fine in bootloader / recovery mode to scroll up and down and select things. I've tried multiple things but nothing seems to work. The problem here is that I want to try and do a factory image but my computer will NOT recognize my Nexus 6P when in recovery mode / bootloader mode. I have all the drivers installed but since I can't access the OS and enable OEM UNLOCKING there is no way to factory flash a factory image is there? Again, I can NOT access the OS at all whatsoever.
View 3 Replies
View Related
Jan 18, 2016
I recently got my 6P and immediately proceeded to unlock the bootloader and flash TWRP to start loading custom roms. I decided to start use Pure Nexus with it's accompanying gapps package but when I go to reboot the device, I am stuck at the circles boot animation.
I decide to try CM13 nightlies and the same problem occurs. After searching online for some time, I realize I needed to flash a SuperSU file from recovery that flashes a custom boot.img. I flash Version 2.66 and restart the device. After 5+ minutes on the boot screen, I decided I am stuck still. What do I need to do, I am unable to boot the device.
View 2 Replies
View Related
Feb 5, 2016
I have found some zip file in the forums that removes all the unneeded google apps when you flash it. There is heaps of stuff i don't need like docs, drive ... Is there something like that for the nexus 6p?
View 5 Replies
View Related
Dec 9, 2015
I was coming from Stock rooted, modified boot.img, superSU 2.52Beta, ElementalX Kernel.
Fastboot flashed 6.0.1 Radio, System, Vendor, rebooted to TWRP 2.7.82, flashed modified SuperSU 2.61 systemless.
Everything works fine. Band 12 works fine. WiFi calling is enabled, turned on, and set to preferred.
Phone status reads IWLAN and network disconnected. WiFi data works.
View 7 Replies
View Related
Nov 13, 2015
I got my 6p yesterday and used skipsofts nrk to unlock and root the 6p. All fine and i am still getting the beginning splash screen saying device corrupt. I was reading in the purenexus rom thread and it said to flash the mdb08m vendor img. When I rooted I was and still am on Mdb08l. Am I able to flash that vendor img on the L or do I need to go up to M? Also is there a link or something on how to flash a vendor img and also where I would find it?
View 9 Replies
View Related
Dec 5, 2015
So I have verizon and I'm using a nexus 6p. My phone died and I charged it and booted it back up.Problem was is I forgot my password. So since I'm rooted i went into twrp and tried my password there. it worked there but not on regular boot up. So i went into wipe and wiped everything. now when i go to reboot my phone it is stuck on the google logo.
View 1 Replies
View Related
Nov 10, 2015
Is there a way to remove the warning on boot, after the bootloader has been unlocked.
View 8 Replies
View Related
Nov 4, 2015
Screen won't get past boot animation for over 45 minutes.
View 6 Replies
View Related
Nov 22, 2015
I've unlock, and root, then, which kernel can remove the boot warning?
View 3 Replies
View Related
Aug 10, 2015
So i have a sprint s6 with 5.1.1 OBE. I have flashed a kernel for root. I found a video online to make RAM more managable and it had to do with earasing some data in the files and reboot. Now my phone is stuck on a boot loop and goes into the "Sprint spark" screen for like 5 min and restarts. Rocovery mode does not work but download mode does. I was thinking of trying to update with smart switch since there is a small update or maybe re flashing the kernel but i dont think that work and the stock roms for OFE arnt online yet.
View 1 Replies
View Related