BB Curve :: Phone On Loud, But Just Vibrates Endlessly
Apr 25, 2011
My phone is usually set on loud, but at least once a day it randomly stops playing my text message alert sound, and when I get a text, it starts vibrating endlessly and won't stop until I check the message. It's saying that my ringtones are invalid and won't play any of them. It also won't accept picture messages while it's in this mode. I can fix it by taking the battery out and putting it back in, but then I have to wait the 10 minutes it takes to turn back on, and this gets very annoying.
I was taking a picture with my phone when the entire phone froze, then a few seconds later the screen went black. This struck me as odd, as I'm pretty sure I had charged it over night last night. It is a possibility that the battery went to 0% though. However, ever since the screen went black, I have not been able to do anything with it. When I plug it into a charger (and I've tried several), the LED light endlessly blinks red. I've tried every way possible to reset the phone (removing SIM card, pressing off button near SIM card, holding down power and either of the volume buttons). Tried connecting the phone to both a PC and Mac, but neither recognizes that a device is connected.
Using a Nextel Curve - when a call comes in the phone vibrates first, then begins ringing. I miss calls all the time at home because I don't hear it vibrate, and it only rings for about 5 seconds. I've downloaded ringers that are 10 seconds, 20 seconds, 30 seconds in length and it doesn't make a difference. Vibrate, vibrate, ring for 5 sec, missed call... Can anyone point me in the right direction?
So I have noticed lately during the middle of the night, my phone will vibrate like I got a notification. When I check, there is nothing. What is causing this?
As the title says, while my phone is on silent (and even on "All Alerts Off"), my phone somehow seems to vibrate when a phone call comes in. It works perfectly fine on SMS and everything else; it's only a problem for phone calls. I have went into the profile settings and it is set to silent and vibrate off. I even have done a master reset of the phone. So I don't know what the deal is.
I have a Blackberry Bold 2 9700. Till 2 weeks ago it worked perfectly, 2 weeks ago while I was sleeping my phone ranged, then I pressed a button(I am not sure but should be the mute button) and suddenly it started to ring only once(then it starts the vibration) while in holster. I looked every setting of it but could not find anything wrong.
My iPhone will now only vibrate when the screen on the right hand side is pushed down. The side of my iPhone has previously come slightly apart (http://forums.macrumors.com/showthread.php?t=881919) which I glued together. But it didn't get the vibrate going again.Anyone know how I could fix this? Or how much I could sell it for whilst not vibrating..?
I have entered the details for the loud profile .When I click "active" the sound symbol has a red x next to it and there is no sound! Normal profile works, but this is not as loud as I want. I have a bb Curve 8520.
The phone vibrates thrice when I try to turn it on, this happened after I used it underwater, approximately 20 minutes after. I tried to boot it b pressing the power and vol key down together, it just shows the sony logo, and then vibrates thrice and turns off again.
Having issues with listening to music at or above 75% volume? My phone vibrates really bad and is distorted. I don't have any type of equalizer app installed either, not sure if theres somewhere in the stock settings to change the preset maybe? This is through Rocket Player, Pandora or youtube.
I was downloading an app from BB app world and my BB started to reboot itself it gets 3/4 of the way through a reboot and then goes back to the beggining - have tried taking battery out for 5 mins and no change.
I was sitting at my desk and all the sudden I hear a high pitched whistle or whine coming from my phone. I picked it up and it is locked. I can't turn it on, I can't turn it off and it just keeps making that noise. A minute later, the noise stops and the phone reboots.
My 8330 vibrates after I answer the call. From what I've been told, its extremely loud and annoying from the caller's perspective. I have attempted several hard/soft reboots with no success. This has been occuring since I updated the phone in May.
I have a blackberry curve 8900! I recently did a swipe cause I was going to sell it!Long story short, I got it back! I did the Host routing table register again and everything was fine! Then when I try to choose my ringtone, I can't hear anything
This is pretty frustrating - anytime I get an incoming phone call when my 9700 is set to Silent, it still vibrates. I've gone through the profile settings and alerts menus, and they all have vibrate set to OFF under the Silent profile. Battery pull has no effect. Anything else I should try?
I've been using Package Disabler Pro and I'm not sure if its something that was considered bloatware or not by the app. I enabled all the disabled packages and it still does does not come back.
Just after the upatde performed, i turned on my cell and from this time when i turn on my phone it just run endlessly the sony ericsson animation. So i can't use my phone at all.
When I plug in my phone once the battery has gotten low enough for the "low battery warning" message to pop up--it begins to flash on and off and beep endlessly. I can't hit ok or use my phone in any way, it just keeps flashing and beeping even if I have, say 15% battery, enough to accomplish some sort of task still. If I unplug the phone I it stops flashing and I could then use the phone normally, but as soon as I plug it back in it flashes the warning repeatedly until I turn off the screen and it then begins charging (what I assume is normally).
I received my iPhone 4s from my company at the beginning of April, so it's less than 2 months old. For the past 2 weeks it has been having problems searching and finding a wifi network. I will do the network reset, airplane mode shut off and on, wifi off and on, power off and on, everything and nothing works. It's little wheel just continues to spin and spin and no networks will pop up. I live in a townhome and there are many other wifi networks around that my computer will spot, but the iPhone sees nothing. Not at work, not out shopping, not anywhere.
I have a BB Curve 9900 running the latest software 7.1.0 bundle 1310. I set up the auto on at 6am and off at 1am which is later than I go to sleep and earlier than I awake, just in case I have any emergency calls, but without using up my battery. However, the sound that comes on when this function is happening is so loud that it wakes me up in the next room. Is there any way to turn off the notifier sound that plays when the phone is turning on and off? I have tried to change the phone profile but it doesn't affect this.If there is no way to turn off the sounds for this function, I don't understand how it is useful. You may as well just plug in the phone and put the profile on "phone only" every night.
My K850i has brod (vibrates and blue ring & keypad only lightup - it repeats these). I upload /boot folder from backup, but problem same then I reflash main, fs, finalize with a2uploader, but problem still same. Phone not dropped, no sign of hardware fault. firmware: r1fa035
I suspect my ring/silent switch is not working properly as the phone vibrates whenever I touch the button and the phone sometimes vibrates indiscriminently.
I've never heard a phone with a vibrate this loud. It buzzes ss loud it sounds like a bee. Is this how everyone elses is or is there spmething wrong with mine? I'm comparing the sound to a bold 2 and a tour and its insanley loud on comparison
Phone was on desk minding it own business I turned on my Bluetooth speakers bose. And the phone made a horrible sound via its speaker phone speaker. Load static for no reason. I went to the radio tuner as it sound like radio static and sure enough as it was searching the static changed.
So why would turning on my BT speakers cause the radio to turn on with static without head phones and be super loud on the phone speakers. The only way I could stop the sound was to power the phone off.
I've had my blackberry for about 2 months, and I've been using it as my main music player with no problems until this past week. Suddenly, every time a new song starts, the music becomes really loud, and I have to turn it down for every song. I've been trying to find some way to reset the default volume for music, but all I've found is enhanced audio, which is not on. Any ideas about what to do?
I bought a Nexus 5 about 15 days back. I am very happy with the phone - except for the fact that I face difficulty connecting to my Home Network in particular. My Windows Laptop, My wife's iPhone and iPAD connect to the same WIFI almost instantaneously. However, my Nexus 5 phone keeps saying "Obtaining IP Address" endlessly. At times, it says "Weak Signal - Cannot Reconnect" and gives up. However, all other mobile devices show that the signal strength is good. the phone does connect to the WiFi after sometime by itself.
I do not have this problem when I am at my office. It connects immediately to the WiFi in my office.
The Router setting at home is as follows : Mode : AP Band : 2.4GHz (B+G+N) Channel Width : 20/40 Mhz Auto Channel Number : 11 - 2462Mhz Broadcast SSID - Enabled WMM - Enabled Authentication - WPA-PSK Cipher Suie - CCMP
