My phone was in a reboot loop. So I asked the Provider for support. Theceommended to Reinstall Software.So I did. After this the system kept on. As soon I aktivated Mobile Network Option. Device was in reboot loop again. it does not matter if I have SIM card in device or not.
View 3 RepliesI am using a BlackBerry Bold 9780, with OS 6 bundle 2647. I am facing a problem that after sometime it gets restart. Sometimes it restarts and then back to normal but mostly it stucks in a restart loop (Red LED turns on as indication that phone is powering On. But it doesn't turn on and the process continues and LED keeps blinking). I tried to update OS version by using Desktop Manager Software, but still facing the same problem. And now i got no more updates for OS.
View 2 Replies View RelatedJust recently my Bold 9650 has been periodically losing the radio connection. I usually only notice it when I attempt to place a call and get the 'radio connection off' message. When I attempt to restore the connection (via Quicklaunch) nothing happens. I have to do a hard reset to get the connection back which is a pain in the a**. I noticed it this time right after I was connected to Desktop Manager. Any correlation?
View 5 Replies View RelatedIs it possible to disable all the telephony functions of the Xperia Ray and still be able to listen to FM radio ? (to improve battery life)
"Plane mode" is unfortunately not an option as it doesn't allow listening to the radio... (whereas it allows you to connect yourself to a Wi-fi network or to receive GPS signals, for instance) Would be great if there was a widget "Enable/Disable GSM networks" or something like that, as there is for other functions... but I couldn't find such a thing.
One morning my torch 9860 didnt start and ended up in an infinite restart loop, the LED turns red for 6 seconds then is goes out, and then again red LED then goes out. Screen is always black. I've tried with JL_cmder and BBSAK but it wont recognize the device. I tried to catch it with AppLoader, and I can do the UNKNOWN PIN thing, but then when the JVM is starting to initialize again it will go into an infinite loop again.
View 2 Replies View RelatedI tried to download 7digital and my phone is now in an endless restart loop and it will not load my phone! I even did a battery pull!
View 9 Replies View RelatedMy phone automatically stuck into restart loop. I was randomly using my phone. And since then it is not working. It shows "Sony" on main screen and then "xperia" and again then back to sony and so on..My phone has ICS, updated long back when it was made available by Sony. I tried doing things but that did not rectify issues like:
1) Removing battery and restating
2) removing usb and sim
3) removing battery and holding power button for a while and restarting
How do I get my Lumia 1520 (AT&T Denim) out of a Restart Loop?
View 9 Replies View RelatedI have a samsung Intensity (sch-u450) which recently entered a never-ending reboot loop. I've tried taking out the battery for a while, then starting it again to no avail. I'm not sure what could have caused this since, as far as I know, nothing changed from the last time the phone restarted. Is there any way I can basically reformat the phone (or fix the restart loop)?
View 8 Replies View Relatedi probably shouldnt say this but,okay i just recently asked a question.about my factory unlocked iphone 3gs asking how to activate it. so i got too excited of aving it and couldnt wait for my tmobile sim card to come one more day. so i "hactivated" it (i know this voids all warrenty) and i jailbroke it just so i could use it as an ipod.it worked and i was syched.
BUTTT.... it asked me if i wanted to update the software to 5.1 and i was like " oh yes id love to" and it started downloading it and it was inrecovery mode the whole time .when the download finished. i hit restore so i can put the software on the phone but the itunes had an error and the phone went glitchy and it does a rebooting loop. it shows the apple symbol with the slash through it for about 5 seconds and shuts off for a little bit (about another 5 seconds) and it starts up then loops the process. ive managed to turn the phone off but if i start it up it loops...Also it does not show up in my itunes because it is turning off to fast to detect.
Info:
iPhone 3GS
I have not used my phone in any wrong way. I did not install a custom rom or anything. no root. randomly in my every day normal usage of my phone, it started to restart. and the the problem got worse and worse. for a few minutes, i will be able to use my phone but then my phone will restart and be stuck restarting. most of the times I can't even go into recovery mode. It restarts again when i get to that. I already resetted my phone, and I wiped the partition.
I have a samsung galaxy s6 SM-G920W8 telus/koodo 32 gb. i got the battery replaced by samsung but that didnt work. i noticed that after a few hours, my phone stops restarting when it reaches to 10% battery life.
After the recent mix radio update,while playing songs it suddenly stops and starts working after restart?
View 4 Replies View RelatedI have my Tour set to auto turn on/off. It shuts off fine, but when it turns back on, the radio does not turn on. The bluetooth turns on, but not the radio. I have to manually turn the radio back on everyday and it's beginning to be a PITA. TIA.
View 14 Replies View Relatedi tryed to rest it .. still dont work and i dawnload the last softwear .. still dont work blackberry torch9860
View 1 Replies View RelatedI bought a blackberry curve 8520 recently but I cannot download applications such as whatsup on my phone since when i do the setup in the second step when i connect the device a message said :BlackBerry App World requires that your device radio is turned on to continue.how can I turn on the radio...where can I find it?
View 1 Replies View RelatedI have had a Curve 8330 in service with Virgin Mobile, for a couple of years. I have just recently switched my cellphone number to a new handset and new service provider. In preparing my Curve 8330 for a new owner (at some point), I opted to use the "Wipe Handset" function, to clean the handset of all my personal information, contacts, etc. During this process, I was advised that the "radio" would be turned off. I thought I was going to be able to manually turn it back on after performing this "wipe", so I wasn't concerned. This would seem (so far) to not work; at least - not the way I was expecting to be able to. Does anyone know how I could at least turn the handset's radio on? While this wouldn't do much good without a service contract attached to the handset, it will at least assure me that the unit is still in working order, and will work properly for a new owner.
View 2 Replies View RelatedI use my wifi 24/7 then one day the radio just turn off and will not turn back on. When i select wifi under manage connections; the red 'x' remains and 'turn all connections off' greyed out. If i try turning on the wifi radio from setup wifi network i get a message saying 'Unable to to turn wifi on'. This is frustrating as my carrier data service is extremely slow.
View 3 Replies View RelatedWhen i try to conect my device it says to turn radio on what does this mean?
View 2 Replies View RelatedJust last night the radio/towers on my phone turned off. I turn them back on or just make a call to restore the connection but they turn off in about 10 seconds.I found this post below: radio keeps turning itself off which describes a similar issue. There hadn't been any posts on it since last year so I didn't know if there was any updates on the issue or if it still signified that it was a hardware issue with the phone.
View 5 Replies View RelatedI cannot access my wireless network - keep getting a message to turn on the radio. How do I do that?
View 1 Replies View RelatedThis is my second Atrix. It is failing to turn on its' Bluetooth radio. I go to Settings > Wireless & Networks > Bluetooth (and Bluetooth Settings) and try to turn Bluetooth on. It indicates that it's turning on Bluetooth and then it fails, returning to the "Turn on bluetooth" message. I've rebooted, done a battery pull, tried to turn it on from Airplane mode...everything short of a factory reset (because I really really really don't want to set this thing up from scratch again!).
View 4 Replies View RelatedChecked the forum and did not find any on this post! Ran my battery down to 4% and radio did not turn off. Has Rim done away with this feature? Not very often i have the battery down this low, and i know it is not good for the battery. I just wanted to see if it would turn off. I plugged my phone in at 4% so I did not run the battery any lower. I thought it was at 5% that it would turn off. Is the percentage lower? Or is RADIO OFF gone?
View 12 Replies View RelatedI have had my Bold 9000 for about two months. I bought it unlocked and have been using it with T-mobile. When I first got it, i upgraded it to the latest leaked os 5.0. The thing is, I had problems with it. First it would just randomly crash and restart and crash and restart, continuously tell it just drained the battery out. Sometimes, on restarts, the standard Blackberry ringtones would not work, and sometimes they would. Sometimes when it would restart after crashing it would say, "net_app_something_ (52) isnt working and was canceled". I assumed it was a bad leak and tried several different version. (and this same occurred with each OS. I would install it on my pc, on my buddy's who has an unlocked Bold 9000 on t-mobile just like me. In the end I gave up and went back to 4.6. Yesterday i tried the new, official OS 5.0.It worked at first, but then when I install the newest BBM, it started crashing again, until the battery was gone. So now I have reinstalled it, kept the standard BBM that comes with the OS. and also deleted Quickpull. thinking it might have to do with it as well. On a last weird note. It seems only to crash in the evening. In the morning it is perfectly fine, however once it passes 4pm , the crashing beings, non if this occurs with 4.6.
Any ideas? My friend and I are both lost. Sorry for the wordy post, but it is really difficult to describe the retardedness of this situation.
Im in an endless respring loop and cannot break out of it. i have tried everything i know... details below
(3gs on 3.1.2, new baseband, with 3.1.3 backed up on cydia...and im running windows XP)
here is what happend:
--tried to set file permissions for the calender app bc it was not letting me add new apointments after SSHing the file from another phone
--used ifile to 1st: private/var/mobile/Library/Calendar (i went one step further) as far as i could go before an edit, then clicked the blue arrow and while the permissions was root, i noticed that it set to read and write only. so i changed this to RWE.
--went back to calendar tried to add a new apt -- no go, didnt work
--back to ifile 2nd: private/var/mobile/Library/Calendar (one step less than the first time) clicked the blue arrow and saw that permissions was mobile. so i changed that to root.
--closed ifile opened SBsettings, and clicked respring. i thought maybe this would cause the changes to take effect. i hit respring three times before it respnded... then it resprung to the sad iphone
--from the sad iphone it has been caught in the respring loop. it goes from the sad iphone to my normal lock screen (i dont run any lockscreen apps).
here is what i have done so far:
--i replaced the Calendar.sqlitedb file with the old (presumably good) file from the old phone via SSH. this seemed to help a little in that now i was able to slide the slider but still, nothing, just back to the loop.
--i attempted to restore from backup in itunes. after about 10 minutes, nothing was happening; the phone continued to loop and itunes seemed to make no progress. so i disconnected the wire.
--i held down the home and sleep buttons until the phone powered down. holding down just the sleep/power button only caused the screen to dim, but the loop continued.
--once the power was off, i turned it back on and ran blackra1n from recovery mode. phone returned to loop.
--powered down again, same method and once in recovery mode, connected to itunes. itunes said it had to restore before it could do anything. i disconnected...
--ran blackra1n again, and once more while back in the loop, and still nothing. but now when i slide, i am seeing the error message about mobile substrate, however, it does not fully appear in that the phone starts to respring before anything can happen. i have been sliding the slider and each time the screen stops at a different level, meaning that i can see the icon animation but the respring stops it at various points. while writing this, i got a text message. it displayed, and then disappeared on the next respring.
Should i do a full hard reset, should i delete stuff via SSH, DFU, i dont know, but it seems like the phone is still intact enough not to need a full restore (which would = re-jailed...).
On a number of occasions where my battery was nearly flat as I put it on the charger before I went to bed I woke up in the morning to find that the device wouldn't turn on. A battery pull sorted it every time. Last night I put my Blackberry on charge and woke up this morning to find that not even the battery pull would work. When I hooked it up to my laptop, the desktop software recognised that it couldn't communicate with Blackberry and offered to update the software (which in fact I did a couple of weeks ago). I read a KB article that said one should do this without the battery installed. Alas during the software update where it gets to the point 'reconnecting to jvm', I have to re-insert the battery as the 'no battery' icon appears on the screen. We then get stuck in the original cycle whereby the device gets stuck in a cycle of light on, light off... and of course a failed software update too.
View 9 Replies View Relatedi bought a 9900 and i used it for a month, however one day the blackberry wont turn on and the only thing that do was blink the red light for ten seconds. i read a lot and try getting out of the endless loop using JL Cmder and Loader, however the device keep doing the same thing over and over, even when im in Loader, it doesnt show any sympton in the screen [it keeps black all the time]. i was wonder if someone could help, or this was a good way to spend $500 dollars in nothing.
View 5 Replies View RelatedI have read many ways to fix this problem but I can not find away to fix it using a Mac? I don't Have a PC so I am lost. My phone just stays on reboot loop
View 1 Replies View RelatedMy mom has literally had her BB 9700 for 2 weeks now and last night it just turned off and when she goes to turn it on it shows that it's turning on and shows the status bar only it doesn't go all the way and just turns right back on? I really don't feel like hassaling with t-mobile if there is another way to fix this!
View 12 Replies View RelatedLast January I bought my BB 9930 Bold. At first it worked well but a few months ago it started rebooting in as a loop. I tried to fix it by removing battery and then it never came back.
View 1 Replies View RelatedI've been facing great problems in turning on my Bold 9700 mobile. I just changed the sim card and from then the cell is not turning on. Whenever it stars to turn on after a few seconds it restarts, then again the actions replay. I can't even charge it as it keeps turning on and restarting again and again.
View 1 Replies View RelatedThe phone is rebooting till the death of the battery. Trying to reinstall OS, but application loader wizard requires the Security Code. But it's not that code that I have setted up (and my code is unacceptable). P.S. Dealer accepted the Warranty Claim, but they said that it's non-repairable (but I think - they even didn't try). I need all the info from device. How to get the security code?
View 1 Replies View Related