Samsung Galaxy S II :: Will Not Connect To Rogers Voicemail?
Jul 29, 2011
Have not been able to find any setttings that will allow me to connect to voicemail on Rogers. When it dials the voicemail number, it disconnects immediately.ere is what I have tried so far:- Tried all three Caller ID settings.- Enabled and Disable FDN (normally disabled)- Voicemail service is set to 'my carrier' (the only option I get).- Changed the Voicemail number in Settings to dial using the area code, no area code, and last 4 digits.
I recently bought a used Samsung Flight online and it appears to be locked. The pictures in the posting all showed it unlocked, connected to Rogers etc and the phone is exactly as shown in the posting based on the nicks/marks on it. However, when I boot it up I am faced with a passcode. I've tried the standard 0000, 1234, 12345, 00000 etc but no luck. I've also messaged the seller but have not received a reply as yet.
ive never used voice mail before and have just transferred my number from my pay and go phone to contract phone (galaxy s2).once it did it.i got a few network messages and a new voice mail notification.i had to set some sort of number to dial it..and when i call it it, the o2 lady voice just says "at the third stroke the time brought to you by o2 will be blah blah" then beep beep beep..then it just loops....no idea what it is.and i cant get rid of the notification..
How in the world do you log out of Facebook app? I googled it up and found the answer but it doesn't seem to work as I can't get to Facebook after I tap my account.
today I picked up a rough looking Bold 9000 and swapped in my spare parts onto it. The catch is, it was a Bell phone. I already unlocked it and it states it is on rogers network now. I don't want the Bell logo/wallpapers to load upon startup, so I though by installing FW Version 5.0.1626 from the blackberry Rogers download page it would fix it.The software update just finished(about 10-15 min) and I see a bell background and bell startup logo. Should the Rogers FW change this over? or are the bell wallpapers/startup logo's programmed into the phone itself and NOT the FW?I don't want to remove the Logo completely, I just rather have it say ROGERS like my old BB and have all the rogers software/configuration.
Id like to know how to disable the 3G in my corby pro in hopes of conserving battery life. I tried some admin codes to enter service menus but they dont seem to work. my phone is currently locked to rogers.I dont have a data plan or need one. it has wifi so i can still connect to the net. Is there any point of keeping it activated, just seems like it would be using up battery life.
i have a milestone that i purchased last night and for some reason i cannot connect to the internet. Wi-fi is fine.I used all the settings i have foundon google. for APN i used internet.com, wapuser1, wap didnt work the milestone has these settings:
Name- APN- Proxy- Port- Username- Password- Server- MMSC- MMS Proxy- MMS Port- MCC - MNC- Authentication Type- (in this field i have these options--PAP,CHAP, PAP or CHAP)
Any help with filling these areas out, i have called Rogers but tech support is not knowledgeable with the motorola Milestone.
I see so many threads where people are taking a Telus Motorola Milestone and trying to tweak it to run on Rogers network (at slower speeds than it would on Telus).Why are they just not going to Telus? Is there some other advantage to making the Motorola Milestone work with Rogers network?It just seems many people dislike Rogers - is there something about Telus and the Milestone I should know about? Maybe locked into a contract at Rogers... but it's not like the Moto hardware is cheap without contract through Telus (something like $599 CAN).
i'm new to this so i appoligize if i have posted this in the wrong place. I have a samsung rugby 2 (sgh-A847m) that was a bell phone I'm trying to setup web and mms. I have APN settings but the problem is There is nowhere to put in the port setting.I had it sending photos at one point even though the phone was telling me the message was not sent but cannot receive any mms.
Anyone know why I can't say "call voicemail" and get it to do just that? It seems like a really intuitive thing to say but anyone with a surname "Male" comes up and no voicemail.
my dad gave me his s2 in hong hong, and i've connected the s2 to a pc in hong kong before. however, when i got back from my hong kong trip, i can't seem to connect my phone to pc. the phone charges when i connect to pc but i don't see it being recognized. my computer doesn't even say if the device is recognized or not. 1) i have reformatted my phone ,2) my phone is rooted ( i followed this guide: http://www.Internet.com/watch?v=be2evusawom / / / http://forum.xda-developers.com/show....php?t=1342728) ,3) i have downloaded the driver from samsung's home site, 4) unknown sources is ticked ,5) usb debugging is also ticked,6) i used a samsung cord while i was in hk and now i use a goki charger's usb cord.i want to connect my phone to my pc so i can unroot it and upgrade the firmware to jellybean
I was using my wi-fi without any trouble on holiday but now I'm home it will not connect. It sees the wi-fi signal does not seem to connect properly. I've tried re-registering but when it tries to connect the phone goes into a loop giving these messages:Authenticating . . . | Save, secured with WPA/WPA2 | Obtaining IP address . . . | Athenticating . . . etc.
I'm having a very frustrating time connecting my new SGS2 via USB to my PC.I connect my SGS2 to my computer, I get an error Android MTP Failed! This is on my Windows 7 PC. So I thought I'd try it on my Windows 7 notebook = same error! So finaly, I tried it on my Windows 7 based slate, guess what = Android MTP Failed! I urgently need to transfer my Outlook info to my SGS2.
No SIM yet I can already transfer photos , phone book data etc with Kies on home wifi, but that's different. I'm going abroad so want to be able to communicate between the two without a sim.
I tried to make the phone a hotspot but it won't because there's no sim.
I have a problem with my GS2.Wi-Fi on and shows as on, but when going onto GooglePlay Apps/internet/Facebook/Twitter etc etc comes up with no connection. (laptop works fine at the same time so I know its not router problem).If I goto settings and take wi-fi off then put back on it works fine, emails come thru.
It seems lik eI have to keep doing this during the day constantly, anyone else had the problems?(Wi-Fi sleep policy under advanced in wi-fi setting is set to never so thats ok)
i have seen movies on Internet about connecting a usb stck to a samsung galaxy s 2 phone. as far as i can se you need a usb micro b male to a usb a female adaptor. however when i connect the adaptor to my phone nothing happens. whereas acc. to the Internet movie "samsung galaxy s2 usb otg demo " of nztechfreak you should see a usb host cable connected message in the host tray. however i don't get such a message. when i then connect my 40 gb lacie mini disk (which as far as i know works as a general usb stick) i won't be able to find that also. i also checked on my computer and it is formatted. i also tried with a real (8 gb ) usb stick, same problem.
I havnt been able to connect to KIES since weds, it just wont connect. I have rebooted my PC and re-installed KIES as well...It just hangs on the "connecting to the device"..
I have a Samsung Galaxy S2 and am trying to connect it to my TalkTalk Broadband. I am not technical. My IPAD,Dell,TV, HTC,PC all connect without problems to the Router (DSL 2780) and without me having to make any adjustments. The SGS2 however, refuses to connect to the Router - yes, I have checked the Router passwords etc.. I just get " Authentication Error" message. I was able to connect the SSG2 to a Hot Spot I created on the HTC phone - so, the phone is obviously ok. There must be a problem with the settings on the Router - however, all other devices connect without a problem.
I have just bought a new Samsung Galaxy S2. I am unable to use the phones 3G services in my flat as there is no service or a very poor mobile phone service. I thought I could connect the phone to my laptop which is wired into broadband and use that. Any ideas on how to that ? The laptop is connected to a wired broadband service, there is no router.
My t-mobile uk s2 has started behaving oddly.this morning calls were fine but tonight i cant make or receive calls,they just stop with a call ended note .
I have connected my SGS2 to Kies in my laptop. Then I quit from Kies and started using my phone (leaving my phone charging via USB). Now, when I start Kies once again, it says device not connected and my phone is not is Kies mode. If I replug my USB at either end (laptop or mobile) it goes to Kies mode and connecting fine.
My doubt here is, how do I reconnect to Kies in laptop without replug my USB, once after I quit from Kies mode in my phone.
Is there any way I can tell my phone to go to Kies mode?
