It says I'm connected. The top has those bars in the shape of a baseball diamond, but when I try and browse it says that the page has moved. I have tried channel 1, and channel 11. I'm trying to connect to my homes wifi, which I have the password for, and I put in, says its all right.. the same of the network is exactly right. I tried the push button method also, that didn't work..
Just got a bell version but waiting to get it unlocked.In the meantime, I've been using it without a sim card but for some reason, I try to set up email and it asks for a sim card. I can browse, gps navigation, facebook and other web based apps but not email. Is there a solution for this?
i have a problem with some wifi networks as the connection goes idle after few minutes and i have to disconnect and reconnect in order to surf the web. i have read that there was some hardware update released on april 28th that fixes some issues with proxy and ssl is that update included in 3.1 or it is separate hardware specific one
Seems that the wifi and cellular networks get crossed or linked together. When one of them loses connection, they both go down and both icons show exclamation marks. Happens randomly. Sometimes when i disable the wifi, my 4g loses connection momentarily.
My Maxx does not reconnect to 3 or 4G after using WIFI. When I toggle off wifi the 4G bars are white and I get a no connectivity message when trying to get e-mail. Then I restart the phone and all is good.
Several times/day now my droid razr HD loses all connectivity. No wifi, no 3g/4g/1x anything. All the indicators are grey and I can't connect to anything. Usually what I have to do is go into airplane mode and then back out and then things are back. I can't say for sure but I thought there was a time or two where I had to do a power cycle to get things back. Not positive about that. I've only had the phone for a few weeks, and I'm pretty sure it's always done this.
I believe that there is a problem with the Atrix network stack. When operating at home (Lapdock or HD dock or stand-alone) I prefer to use the local WiFi connection (because the cellular signal is useless for data here on the _9th_floor_ (thanks T-Mobile UK).
1/ On its own the Atrix does not properly switch to _use_ WiFi- it tries to use either WiFi or GPRS/3G/HSPA from time to time. This does not work well (read the reviews that say that the Lapdock is slow and I think that this is the problem being reported);
2/ I installed Juicedefender which is free and which switches OFF the GPRS/3G/HSPA radio when WiFi is being used:
BUT - then I notice that the WiFi data stream stops after about 90s and only re-starts after either several minutes have elapsed _or_ I switch off and on again the WiFi radio. VERY POOR. Worse, on checking with my router, the ATRIX remains _connected_ to the WiFi network at all times - so this is the internal software losing contact with the active network interface.
At first, it was loaded and the browser would not recognize Flas as installed.I uninstalled Flash, and tried to reinstall. Up Came the message "Adobe Flash Player 11could not be downloaded due to an error (941)I tried everything, including uninstalling and installing each browser "Default Browser from ATT" Firefox and another one called Dolphin,
I made some videos for my English project that is due tomorrow and it will not let me transfer the videos to the computer, and it won't let me view some videos... How can I fix this? The file shows a G3PP. I used my phone as a mass storage when i connected to the computer, and then transfered all of my videos and pictures, but the ones from my english project weren't there.
All of a sudden, my Electrify will not connect to my home network. I have Macs and use an Airport Extreme router. When I open up wifi settings it sees my network, as usual, and then I have to select it to "connect". Which I do. It scans to connect and then, within seconds, disconnects. It will keep scanning and I see my network there and could repeat this process over 100 times with the same results.
I've had my Electrify for two days now and have noticed less that stellar wifi performance, compared to the 3 other smartphones that I have had previously. I noticed that the Photon has recently (last week) had an update to help wifi performance. When will this update be available for the Electrify?
A couple of weeks ago my phone was updated to the latest system software, and now am experiencing a slight problem. My phone can no longer connect to a WiFi where the wireless SSID Broadcast is disabled. Once enabled, it will automatically connect, as if it couldn't find it before. Then, if I disable the broadcasting, it will disconnect as if the wireless were shut down. It didn't do this before the update. Is there a setting or something that needs to be changed? After the update, I had a setting or two changed, automatically it seemed, that caused problems (such as the Data Saver turned on) but this is the last thing I'm having issues with.
Can you create a hot spot with one phone then connect WiFi with another phone if so does any one konw step by step how to do this. the reason I ask is I have 2 electrifys and if I could do this then when there is updates I could make a hot spot with one phone and connect wifi with thother and do the update then swicth and do the same with the other phone instide of going and looking for a wifi somewhere.
If I turn on wifi and connect at my home my pictures from facebook, ebay, etc won't load. If I turn off wifi they load fine just much slower than on wifi. I haven't tried to upload pictures, just viewing them.
To turn my wifi on i use widgets, it gets stuck mainly on obtaining ip address. For it to connect quick I must go into settings to wifi for it to work. Why is this happining? I have a solid wifi connection. Is anyone else having this problem. Just to refer my knowledge to others classify me as a hacker.
My daughter (who lives in another town) and I just switched from Samsung Mesmerize to Electrify phones. We both have D-Link DIR-655 routers in our homes. Although we had no problem using wifi with our old phones, the Electrify searches, connects and then immediately disconnects. I've spent hours checking out the router software as the admin, checking on line to see if others have reported this and I've tried every combination of options on the Electrify. We're both running Win7 and both use our routers successfully on other wireless devices in our homes.
I can delete individual emails from my inbox. However, when I go to Trash folder there is no method to delete the Trash contents. Searching the manual gives zero information. Searching online has not been much more productive. The methods I've seen in independent forums don't work for me.
Does anybody know how I keep all of my past appointments on the Electrify? I check my google calendar which is syncing fine and see all of my past appointements, however they are gone from the phone. Additionally, even though my google calendar is scheduled out for the entire year, my phone calendar stops at December 15th, 2012.
It seems that some cellular associates are telling customers that the Electrify is 4g ready and will be able to be updated,when US Cellular launches 4g. The general consensus is that this cannot be possible.
Anybody have an easy way to convert the video I shoot on my Electrify to some readable format on the computer? I've tranferred the files to both Mac and PC and neither have worked. I almost thought it was because I turned on the encryption, but I haven't had problems with photos, and I don't know why video would be different. Didn't have this problem with my old phone
Iam a Uscc agent and I have a customer with the electrify and their phone is dying within a couple of hours and only sending a couple of text messages and making one phone call I have given a battery swap and checked the phone for any bad apps but there were no additional applications installed and settings do not seem out of place and compared it to mine that I have abd everything matches and mine lasts me an entire day of heavy use. I am just wondering if there is anything else that could be draining the battery or a way to fix it?
Testing the multi touch functionality of my phone, to my dismay, shows acknowledgement of two points of contact. Needless to say, the piano app that I use.( for jotting down quick ideas, I am a music director at my church and a songwriter) is nearly unusable because piano often uses more than two fingers. I know that the hacking community has been able to enable up to 8 points if multitouch. Is this going to be enabled for this phone? I would hate to get rid of it since I love everything else about it, and have no problems at all with any functionality. ( aside from that whole pesky multitouch thing).
I recently purchased a 9700 bold, I have the blackberry personal bundle (unlimited web and text). I attempted to set it up on my home network via WiFi. After changing my network to WEP (because for some odd reason WAP wasn't supported?) I tried doing the PIN thing didn't work, and the push key on my router, ended up just changing to WEP and entering the huge code.
It's all connected and everything shows little WiFi thing on the desktop (not main menu) right when I click the browser it opens up my home page still showing WiFi, go to another website, boom goes to edge?! loads slow, my network should be faster than 3g easily. Why can't it use my WiFi to browse the web at home? I get poor reception and I have no idea why it would use EDGE instead. Also I tried to download application world off of RIM's website, along with the AIM client both gave me 404 errors saying the file wasn't available.