I am on my second Atrix in two days. The phone takes 10-15 minutes to connect to the ATT edge network. Motorola and ATT tech support have no answers. My razr gave me 5 bars and the ATT tower is in line of sight. I am ready to get a Samsung..
My c7-00 not connecting through edge/gprs network of tata docomo network,but that of reliance,airtel is working.it is not showing even E sign when packet data connection is "when available" mode. other ones are showing it.
My 3G XOOM (MZ601) is having a small issue since the 3.2 upgrade that if i have the XOOM at home connected to my WiFi, then take it out with me, it refuses to connect/switch to my Mobile network without a restart. Once I have done this it works fine, but it's a bit of a pain having to turn it off and on again every time I leave the house.
I have owned my Atrix for about 3 weeks and it constantly switches back and forth from 3G to EDGE, rinse and repeat. It does this about 30-40 times per day. I have a very strong 3G signal in my area and I notice that my Atrix does this MORE OFTEN than my iPhone 4.Also, I am dropping a lot of calls on the Atrix compared to the iPhone 4, which I was really surprised to see this happening. I do have all of the latest software updates installed on the Atrix.One more thing, I noticed that on AT&T you can't install from "Unknown" sources, hence I would like to take advantage of the daily specials on the Amazon android store and I am unable to do so without the option on the phone.
i updated my atrix to 4.1.83 and after it installed fine now i no longer have H+ only E for internet speed. "AT&T US HSDPA" is selected. anyone having this problem? my speeds used to be about 2500kbps - 3300kbs now im at 60kbs. apparently 4.1.83 increases speed for others by slowing mine down.
I just bought an ATRIX 2 at end of October and have spent days trying to make WIFI connection work.I could get to internet via cellular 3/4 G but although the phone would show the WIFI network and know it was there it wouldn't connect.It would try and then say "Disconnected".Finally, through reading tons of blog entries on different sites, I pieced together a solution I wanted to pass on to others.I have an Airport Extreme router.It was necessary to enter the MAC Address from my phone into Airports setup using Airport Utility. Then I also had to explicitly choose a Radio Mode that did NOT include the "N" option. Most options are hidden (for some bizarre unkown reason) so when clicking on the Radio Mode field in Airport Utility Wireless Section, hold down the "Option" key (at least on MacBook...maybe Control on Windows, but then you prob don't have an Airport router).This brings up a bunch of Radio options not shown by default.Choose one with no "N". Then be sure the Enable Auto IP" is checked "ON" under the Wireless Settings/Advanced section.Once this was done, have full strength connection and blazing fast.
I just got my phone and am LOVING it. I was one of the iPhone users who was hoping/ready for a larger screen and when it didn't happen I decided to look for something new. Picked up the Atrix 2 last night after a TON of research and I'm loving everything except what seems to be a bit of a bright strip on the left lcd perimeter. It's very slight but seeing as the gorgeous screen was a big reason I went with the A2, it's bothering me. It's most noticable when the screen is locked and dimmer. Wondering if anyone else can notice this on their phone as I'm thinking of doing a swap at the AT&T store.
Ever since I got my Xoom back from the 4G upgrade I have a problem with no internet access and generally a restart seems to wake it up. is anyone else experiencing thisIt might be my routine combined with geographic locations at specific times (e.g., commutting.)
when I go into Music and try to search for podcasts or internet radio it doesn't connect. This has been an issue since I've had the phone. I'm connecting via the WiFi when I'm doing this.
my phone automatically did the update a few days ago and rebooted and ever since then I have been unable to access my FB account and connect to the internet on my phone. I've got the buttons unchecked that say to connect only when wifi available, so I don't know what's going on.
I am getting red circle for network strength (where is display H+, E etc) more frequently after .83 update. Many times phone call just cuts and I can see red circle. Also when browing data red circle is there.
I have unlocked AT&T Atrix 4G from the states, voice communication and sms are working fine over Vodafone GSM in Egypt, WIFI is ok.
Problem is in accessing the internet, tried with Vodafone different APN configurations but was unsuccessful and still cannot access my email's and browser.
I have an AT&T GoPhone account. When the phone boots up with an AT&T SIM card installed, it goes to the "SIM Network Unlock Pin" request screen. I have worked with both Motorola and AT&T tech support personnel for many, many hours to get my Atrix to accept the unlock code I have been given from AT&T (22314992). The Atrix response is always "Network unlock pin unsuccessful". The phone otherwise works beautifully after a fastboot coldboot (wi-fi, program installs & usage, etc). But one simple problem...I can not make phone calls.
recently purchased a Motorola Atrix 2 from the Mot Corporate store here in the US. It works well with AT&T SIM but I wanted to unlock it for using an international SIM when traveling outside. I got the unlock code from AT&T but the phone didn't accept the code. I tried the code twice and both times, I got this message "Network Unlock Request Unsuccessful". I have confirmed the IMEI by using *#06# and matching it with the number on the back sticker. I checked with AT&T again and they said that Mot said that the original code provided is the right one for my phone.
So, I am stuck now. I don't know what I can do about this phone. I would really love to be able to use it outside the US and that was one of the reasons I paid an unsubsized price for it.Anyone else facing similar problems with the Atrix 2? Is there a software update that can fix this issue? I don't want to try the same code more times because I am afraid that it will hard lock.
I miss being able to easily send and receive images via text message.
This was a major way that I communicated with my farflung family. With the Atrix, I can't seem to get this to work without going to settings and enabling the data network for everything that might want to use it ( and that seems to be a considerable number of things despite my efforts to choose wireless only options.) I realize I can turn it on briefly to send (though that's a multi-step process) but there's no way to anticipate when an MMS message is coming in.
I want to have an app that displays every server the atrix is connected to,omething like netstat but better.I have seen lots of options on the market, like network monitor for example.
I bought a locked Atrix by amazon market place end after I bought the unlock code. When I try to unlock is displayed the message "network unlock request unsuccessfull". i'm informin a 8 digits code.
My phone currently can make calls and send text messages but it will not send/rx data type calls. The H+ icon is displayed and I'm in a good signal area. Wi-Fi works fine. In the Phone status menu, I see a potential problem in that the Mobile Network state is set to "disconnected". Mobile Net type = HSPA (which stands for what?), Service state = "in service", and I'm on an AT&T network.how to get my mobile network state back on?
My wife and I have identical ATRIX 2 phones just over a year old. Always has been some strange things happening staying connected to wifi network but that finally corrected itself on both phones
After ICS update in November i have to toggle Airplane mode on and off to get wifi connection back after a period of not useing it on my phone .
My wife was reluctant to update hers when I did as she doesn't like change. However over time her phone kept droping wifi network connection. I would have to power it down and remove battery and sim card to get it to stay on wif for a few days. Finaly that was no longer a fix. I went to a AT&T hotspot and downloaded the latest ICS update.on her phone No matter what I do it will connect to our network wifi and bring in mail etc for about ten seconds then the singal bars change from white to blue, The settings menue shows wifi still on blue connected but the signal bars shows blue. Her data use would indicate it is indee using cingular data.
Since the recent update to Market I lose my data connection every time I go to "My Apps" to check for updates. The H+, up/down arrows and signal bars on the notification bar change color from blue-green to black and the data connection is broken. Other apps say "no network connection." Cycling power corrects. Have not experienced this problem with WiFi (only one attempt to date).
I have the Social network widget on one of my home pages (post 2.3.4 upgrade). At first, it worked fine, but as of this morning, it force closes evertime I open it and attempt to scroll the messages. The "Messages" Widget continues to work fine.
I've tried removing and re-installing accounts, removing and re-installing the widget, and changing widget settings. I even tried to go to Settings>applications>manage applications to try and clear the data and cache, but thos buttone are not enables for the Social networing app.
If Wifi drops or I turn it off, the remaining icons go white, and then if you go to settings, about phone, status, the phone states UMTS and then switches to HSPA, and it states on network "Connecting, or Disconnected" A power Cycle will sometimes help. If I turn wifi back on, I have a Blue wifi, white H+, and a Blue Network Signal strength.
Since Upgrading to 2.3.4 GB, my Atrix has consistantly dropped the Data portion of the Connection, the Wifi and Network Icons are Blue and showing H+ Icon. If I go from Desktop to Email, the Icons go gray and time elapses before they turn "Blue Again", If I try to access email, I get a warning, "No Data Connection or The Password to your ISP is not valid.
I fitted my Atrix on the multimedia dock, power connected then connected HDMI cable from the mm dock to my Vaio laptop HDMI, as I read and understood the firefox browser should be launched directly but did not happen
By the way I have the whole motorola multimedia kit.