Motorola Atrix 4G :: Blank Screen / No Power?
May 2, 2012
went to plug my Atrix in last night, it had been sitting on the dresser. Worked fine when I set it there 4 hours earlier. Battery was maybe half charged, hadn't been used much that day. When I got back to it there was nothing; blank screen, no LEDS, and wouldn't come on. Plugged in and RED LED lit up. Left like this for a while and when I came back the camera light was on, but when I unplugged it went off. Still no power. Read that maybe not original Motorola charger. Got original and GREEN LED came on. GREEN LED also comes on when plugged to PC. When it is unplugged there is nothing.
View 2 Replies
ADVERTISEMENT
Sep 6, 2011
My stock music layer is having trouble pulling up my music library. I get a blank screen 97% of the time. Once in a great while it will actully pull up music but most of the albums have no artwork.Other apps I use have no trouble accessing my library
View 5 Replies
View Related
Jun 1, 2011
Today I picked up my phone and tried to press the wake/power on button. Nothing happened. The green LED is on and solid, the screen is black (sleeping) and it refuses to wake up. The phone did not get wet, I did not drug it, it did not do some heavy exercises, it was sitting on the table, it is not tired. So, what am I supposed to do now? How do I wake it up?
View 11 Replies
View Related
Sep 13, 2011
i had the problem stated above- After changing the handset for the 3rd time, i finally (thank God) have a stable phone. Wish the rest of you luck!If you have a similar issue PUSH TO CHANGE THE HANDSET - it is not normal behavior
View 7 Replies
View Related
Mar 8, 2012
I was under the impression that once lapdock battery died, that the lapdock would run off the Atrix battery, is this incorrect?
View 3 Replies
View Related
Nov 3, 2011
I am trying to open an internal compay web page on Atrix with no success. The page has a simple aspx login and just comes up blank. I never get the chance to login.The site opens and runs perfectly on my desktop and my Xoom tablet. Could there be an issue with trusted sites (NOT https)
View 6 Replies
View Related
Jun 4, 2011
My Atrix 4G will not boot up when powered on. After a flight today I powered on the phone and the Motorola logo appeared but did not go into its usual animation during the boot process. Instead the logo remained still and about 65 seconds after powering on, two messages appeared at the top of the screen above the logo:"Modem did not power up (2)" and "Starting RSD protocol support." It froze in this state and the power button had no effect. I removed and reinstalled the battery three times. the last time waiting several hours before reinstalling, but the problem remains. There is no physical damage to the phone and it was working perfectly about an hour earlier when I first shut it off.
View 4 Replies
View Related
Mar 8, 2012
I own the Atrix 2 and the LapDock 100, I was under the impression that once the battery died on the Lapdock, that the lapdock would run off the atrix 2 battery. Is that incorrect?
View 2 Replies
View Related
Sep 5, 2012
when the phone restarts, the power widget is gone and some random app from my app drawer is there that might not even be located on any of my homescreens.
View 7 Replies
View Related
Nov 13, 2011
My 3 week old Atrix 2 will nolonger charge from the AC adapter that was included with the phone. It will only charge when connected to a computers USB port.
I've tried:
an old Iphone AC adapter car charger different USB cable removing SD card removing and reinstalling battery factory reset
View 6 Replies
View Related
Sep 29, 2012
Has anyone else noticed wi-fi showing as being on thorughout the day. I have had it off for a couple of days now and in the battery usage screen I still see it reported as on most of the time. In addition it seems to be using as much as 10-15% of my battery even though I don't have it on.
View 7 Replies
View Related
Aug 6, 2011
I Was wondering what games are out that can really utilize the amazing processing power of this phone? My areas of interest are Racing games and RPGs ( The more old school the b7vetter).
View 3 Replies
View Related
Oct 1, 2011
I've had two Atrix phones since March of this year. The first one was replaced for an issue unrelated to the topic of this post. Both of these devices demonstrated the following behavior:
Approximately every 15 to 25 power cycles, when the Motorola logo starts to animate the phone's LED will begin to blink in one of several colors. It stops blinking when the Motorola logo disappears. The blinking color is most often violet-purple. However, on at least three occasions I've seen it blink light blue and on one occasion it was blinking red.
The blinking LED at this stage of system initialization appears to be a color coded reporting mechanism to indicate a particular state of the phone (perhaps a failure code reporting feature). I'm guessing it's similar to the POST beep codes that a personal computer emits shortly after powered on to indicate such things as device failures, driver loading issues, or configuration problems.
I would like to know what these colors mean during this stage of the phone's booting process. That is, when I see the flashing LED during the Motorola logo animation, I want to know which part of the system is failing. There's no information on the web (including within this forum) that I've been able to locate on this and Motorola technical phone support personnel seem oblivious to the fact that this blinking color reporting even exists.
how to learn what these codes mean? As I've mentioned, both of my Atrix phones have demonstrated this behavior, so I presume all Atrix phones are equipped to demonstrate it as well under certain conditions. It's hard to imagine that Motorola engineers would have implemented a feature like this and then provided no information to anyone about what the color codes mean to make the feature useful.
View 3 Replies
View Related
Jul 15, 2011
In this intermediate energy conservation mode for the PHONE not for accessories. The Bluetooth radio would be left powered DOWN in this mode and would only be powered up when needed/on-demand. For PLACING a call, it would require the call be ORIGINATED from the PHONE, as opposed to from the earpiece, or handsfree (the bluetooth headset/ handsfree/ accessories would be left on). As for receiving a call, it would HAVE to be answered through the phone.When in the intermediate bluetooth power conservancy mode, the phone would powerup the bluetooth, and do a quick search for a preferred-paired bluetooth device immediately preceding connecting the call. I do not mind the fact that when in this Bluetooth power conservancy mode one would have to interact with the phone to answer a call, since most of the time i want to SEE who's calling anyway i do not use caller ID text to speech/announcement anyway as i do not like it from a privacy standpoint
Please allow me to set bluetooth connection priority preference.Would be cool if simply re-ordering the list of paired BECKY TRIPP devices, would create a connection preference order.create a means to individually set each PAIRED bluetooth device with a trust level Meaning, if i pair my Atrix with my home computer, and i send a file from my home computer to my Atrix via Bluetooth, i'd like to be able to have set a per-device preference that would allow me to tell the Atrix to unquestioningly, and with user prompting, (there can be a Notice of the incoming file) accepth the file and download it to the default Bluetooth directory (or to my downloads directory).it would also be cool to be able to set system-wide defaults for where various downloaded media are stored based on the media type e.g. music files go to audio/music directory, videos go to vid directoty, documents go to Documents dir etc etc..
View 4 Replies
View Related
Oct 25, 2012
I finally broke down and installed the Atrix HD update yesterday. What a mistake. Prior to installing the update, I could drive from home to work and have the battery drop from 100% to 95% in about 20 minutes or so (which, is terrible as well). Today after installing the update my battery went from 100% to 87% in the same 20 minutes. I can't believe that an update that was presented good for battery life actually makes it worse! I can say however, that the performance of the phone is better (touch responses, less laggy, etc, but I am sure that is at the cost of battery life). Other than a hard reset is there anyway to get this update off of the the phone?
View 5 Replies
View Related
Jan 2, 2010
Today when I switched on the phone the screen wouldn't come up...New Year Shocker. Incoming/Outgoing calls continue to work. Any hardware/software reset option?
View 1 Replies
View Related
Jan 13, 2012
last week my screen was staying ON whether the screen time out was checked or Not checked..This week, the opposite..the screen in both scenerios (time out checked or not checked), is first dimming and then going black screen?
View 2 Replies
View Related
Nov 27, 2012
I just got this phone in june and this is the secon time this happens, the phone would turn on and the lights everything on as if it was really on, but cant see the screen. A backlight is on but you cant see whats going on the phone. the only thing you see is a black screen, but it is ON you can feel the vibration everytime is press the screen, i just cant see the screen. i dont know what to do and im unable to attend a store to fix it
View 1 Replies
View Related
Jun 19, 2012
i have a blank screen. is there anyway to recover my screen? i can still answer it but thats it. please help me i have some important numbers in it.
View 2 Replies
View Related
Mar 17, 2012
I'm really tired to find the way to fix the dialer and contact blank screen. I factroy reset the phone more than 3 times but its just standing for a week or some. I don't have plenty of applications installed, i just use gmail and a FB messenger. Tell me the use of the phone that can't dial anyone ! I just bought the phone a month before, but its starts bugging me everyday.
View 1 Replies
View Related
Aug 27, 2011
I just download software upgrade for my bravo and now all I get is a blank screen. I have taken out the battery several times, yet I can't do anything.
View 1 Replies
View Related
Jun 12, 2012
I recently bought an apple 4S 16GB phone and been using the same since last about 20 days. Recently for no apparent reason, my iphone 4s went completely blank, neither power nor Home button worked. I had to press power and home button simultaneously to reboot and get it started. It happened twice in a span of 3 days. I am using Vodafone 3G services in India. Its quite annoying to find your phone in a vegetable state and wait for 1-2 minutes to get it rebooted every now and then.
Info:
iPhone 4S, iOS 5.1.1, Carrier Vodafone
View 2 Replies
View Related
Jul 4, 2015
After updating to Lollipop 5.1, I noticed my screen is blank after using any app (messaging, GMail, etc.) and it won't come back. Calls and texts and other notices come (can actually answer calls and see the call screen) through, but home screen and any adjacent screens are all black. The status bar and icons are visible though and I can use the pull down menu. It's as if it is refreshing but never gets to the end. I installed many apps, even used a stock wallpaper), but it still will do this. I have to keep rebooting until it eventually stops; I check it by using a random app and seeing if I can see the screen by pressing the Home button. I also wiped the cache partition after the OS upgrade.
View 1 Replies
View Related
Dec 6, 2011
i dont believe i have seen this mentioned so if it has i will close my own threadanyway about 20% of the time maybe less i will get a call and it is ringing but the screen is off. i have to hit the wake button and then it shows the call as
View 2 Replies
View Related
Jun 27, 2012
I have recently acquired a Xoom Wifi +3G.It has been upgraded to ICS.I have recently downloaded Adobe Flash Player 11 from the market.It doesn't work. Ths screen just stays blank.As the ablity to run Flash Player is one of the key differentiators for buying a Xoom rather than an iPad.What is worrying more is the rumours on the internet that Adobe are going to stop development on the ICS version.
View 4 Replies
View Related
Dec 14, 2011
My droid 2 has decided to start acting quite funky.it will freeze, the keyboard stops working mid-text/email then goes back to the home screen like that text/email draft never existed. I also am having trouble answering calls. When a call comes in, i touch answer but there is no response.
View 3 Replies
View Related
Aug 6, 2011
Is there a way of changing the lock screen i.e putting a new picture on it so it is not blank? I can not find the option to do this in the settings.
View 6 Replies
View Related
Oct 20, 2012
I have already went to a uscc repair shop and reflashed my android os keeping my data. It seems to do this again. Phone first works fine then black screen with green led indicating a reboot. I had to do a cold boot on my way to the uscc store just to get to the android os and backup my stuff. I want to get by with this phone until the Electrify M is available in November. I do have insurance, I asked about replacing the device and there will be a $50.00 charge. I am trying to work around of this by keeping it working and useable and not restarting and stuck on a startup screen. Ohh btw the boot screen it is the motorola logo solid.
View 5 Replies
View Related
Dec 2, 2011
I don't like having to use the power button to wake my display screen. My old droid I only had to press the home key. I am afraid the power button will wear out fast on this phone.
View 1 Replies
View Related
Jun 21, 2012
Has anyone tried this app? It uses the proximity sensor to turn the screen on. From what I have read, the "lite" version was designed for one certain phone but the pro version ($1.28) is supposed to work on all phones. There are not a lot of reviews as it is a relatively new app but almost all are positive. It is in the Google Play Store under Smart Screen On Pro. Curious to know if it actually works as they say it does. I really dislike using the power button to turn the screen on. I guess I was so used to the home button on the DX turning it on. if anyone has tried it, would like to hear yeas or nays on how it works.
View 3 Replies
View Related
Jun 16, 2012
I just got my Razr Maxx and charged it before using it. When the screen time out and goes to sleep i canīt turn it back on by pressing power button. I can turn it back on by doing soft reset (pressing power button and vol down) when doing soft restart I donīt have to press pin number, as needed when i turn the phone off and back on. When the phone is in the charger there i no problem.
View 1 Replies
View Related
