Motorola Droid Razr :: Blank Screen On Incoming Call?
Dec 6, 2011
i dont believe i have seen this mentioned so if it has i will close my own threadanyway about 20% of the time maybe less i will get a call and it is ringing but the screen is off. i have to hit the wake button and then it shows the call as
I having phone go to silence mode by itself lately. I set "call out and ring " in system setting- acceessibility menu. I also set Vibrate and ring in System setting- sound menu. But sometime it Vibrate and Ring got unselected by itself.
This has only happened a couple times, but is really annoying when it does. The phone will be idle, not in use, and I will receive an incoming call. When I go to swipe the unlock/answer screen, the touchscreen is completely unresponsive and I have to let the call go to voice mail. I can't figure out what is causing it, but it periodically happens once or twice a week.
I have updated my phone firmware recently. The screen slide unlock feature is cool.... but most of the times, the screen goes blank when I receive a call making it difficult to figure out the caller before I receive the call.
Why does my Razr Maxx go to lock-screen in the middle of a phone call? All my past androids stayed in an 'awake' condition while actively engaged in a call. Then, when the proximity sensor was triggered when you removed the phone from your face, the screen would light-up, the phone screen woudl be present, and you would simply end the call. Now, when I remove the phone from my face I find the lock-screen, so I must first unlock it before I can end the call. I have searched for a settings to fix this and cannot locate what I need
I just traded in an iPhone 4 so I'm just learning the Motorola system. I usually set my display to go off after 1 minute to save the battery. On the iPhone the screen will stay on during a phone call. On my RAZR M the display goes dark after 1 minute and I can't figure out how to re-light it. Hitting the power button ends the call. Is there a way to keep the screen on other than setting the time delay to 10 minutes?
I have noticed while on a call the screen will go dark, and when I go to end the call it does not light back up so I can see the end button. I find that I have to push the power button to get the screen to wake up so I can see the end button.
First let me start by saying I had the RAZR and I used Smart Actions quite a bit to control certain functions. I then got the MAXX because well I wanted it.. and its massive battery. So, I updated to 6.12.173 and went to set up a smart actions and found that I could not find the Incoming Call Trigger.Now I had this bult on the orginal RAZR already, and I had updated the phone so I went back and it is mssing from their as well.
I just got a CLN Razr a few weeks ago (came from a Bionic) and love the phone. One question that I can't seem to find an answer for though. I put the phone in vibrate mode and text, emails will vibrate. However, incoming calls will not vibrate, just silent. I checked the sound settings and Silent mode is set to vibrate. Any ideas on how to set the incoming calls to vibrate?
Has anyone else noticed a crackling noise (like bad reception / interference) when placing calls? I want to say what I notice is when I'm getting the ring back while waiting for someone to pick up is the "only" time I hear it. The audio in calls seems to be ok. It's sounds like a weak signal or interference. As far as I know (though I use my phone more for data than voice).I haven't noticed anything horrible as far as reception/call audio in calls, aside from when calling my mom, but I think that's her (she's famous for leaning on the mic or mumbling and trailing off). I start to think I must be old (I'm not) and losing my hearing (I'm not) but then I just realize it's herI don't know if it's because usually when I make a call I just unlock the screen and make the call and it was trying to re-start any data sleeping modes and such or if it's something else...
I have a Sony Ericsson Aino(u10i) handset. It has the following problem:-Touchscreen goes blank during an incoming call. hence i have to slide open to answer the call. but otherwise other media functions on touchscreen works. I also have the latest software update on my phone. Kindly let me know what could be the problem.
Frequently when I am using my bluetooth (I use more than one Motorola BT Oasis and Motorola H710) and when I end the call the Razr does not drop the call until I wake the Razr up.
This is my first "smart" phone and I have a question that (I hope) has a simple answer. The phone produces sounds when e-mails or text messages come in as well as for phone calls, and I want it too. Except at night. Is there a way to set the Bionic so that ONLY an incoming phone call produces a sound?I have an elderly mother and need to receive an emergency phone call. However, I don't need want the phone to wake me up any time an e-mail or text message arrives. Sleep mode allows calls to come in but there is no sound.
Brand new Car Dock and Razr. Installed and all good working no problems for first 2 days,then when I dock the RAZR it does not change to the car navigation screen or start to charge.Power light on the power cable. RAZR charges and transfers data via other cables.
I frequently hit adjacent keys while texting on my old Droid X. A larger screen and of course 4G and a faster processor were appealing as well. As the Razr HD models sport screens almost as large as the S3 I ran to see them on their first day out of the gates. What a disappointment! Holding my old Droid X up against them I saw that the usable screen sizes were identical. Namely 4.3" unless playing videos in which case the video filled up the Razr HD's 4.7" screen. I couldn't find anything else that would fill up the screen. Perhaps, photos might. But internet browsing, texting and whatever else I tried occupied a 4.3" inset within the 4.7" screen. So why have a 4.7" screen at all? The Galaxy S3 on the other hand fills up the entire 4.8" screen with not only video but everything else, including texting, messaging, web browsing, and everything else I tried. So what gives? Why did you even create a 4.7" screen if you aren't going to utilize it to its full potential?
I have only had the Turbo a few weeks. I have turned on a call answer vibration somehow. My wife's doesn't do it. I cant figure out what I turned on. Need turning the vibrate pulse off. Its when swiping to answer incoming calls only. I have vibrate turned off under settings.
Is there any way to get notifications, sound, led or both, when I'm on a call? I know messages (text, email) are getting to the phone when I'm on a call but I don't know unless I'm looking at it.
When I am on a phone call and want to wake my screen, how do I do it. Nothing I do seems to work except pushing the power button and while it wakes the screen it also hangs up the call.
The phone app freezes on my device, I cannot receive the call. Long clicking on the power button and toggling the Silent option the phone app crashes.Are there others having this issue? I saw a thread about this for Defy (sans plus).If so, has this been fixed with the software update that is available for eg. German users? In Scandinavia Motorola is still not offering any software update My device is running 45.0.1370 Nordic Retail EU.
On Oct 20, we switched from AT&T to Verizon Wireless after being with AT&T for over 10 years. We had iPhones and had to get new phones when we switched. The Verizon salesperson convinced me and my adult daughter to get the RAZR HD that had just come out and he said it was better than the iPhone. My husband stayed with an iPhone because he is a commercial pilot and needed to use aviation apps that were not available on a DROID phone. Initially we were very impressed with the RAZR HD until my daughter had a problem with hers after just 20 days of use. She is an EMT and was on duty sitting in her ambulance. She has to have a phone on her while working. She used her phone several times and had it in her front pocket. She took the phone out of her pocket to call us and the screen was black and not functioning—a few minutes before it was working fine. She noticed some spider cracks in the LCD at the edge of the screen. She took the phone back to the store where it was purchased and the Verizon salesperson accused her of abusing/dropping it and said she would have to file an insurance claim which would cost $99. I was shocked. Our iPhones had heavy mobile use and were even dropped several times, including on cement, but never failed. I told our daughter we had no intention of filing an insurance claim for a defective product that should be covered under warranty. For all we know, it had damage before we even bought it from Verizon. But when she contacted Motorola, they said a screen failure due to a cracked screen was not covered but she could send it in to be evaluated. When we read the warranty, it does not say this. It says it doesn't cover damage caused by accidents, abuse, misuse, including improper usage or operation, abuse or neglect, or impact damage, such as dropping the phone. The phone had not been dropped, abused, or misused. There is not a scratch or any physical damage on the phone and the glass. The phone failed under normal use. The LCD screen under the glass fractured. Normal use should not cause this unless there was a manufacturer's defect in the phone. I.contacted my dad who works with digital and analog wireless technologies/hardware, and he told us to file a warranty claim. He said the phone has an accelerometer in it that detects G-force and impact and Motorola should provide us the data that shows the phone was impacted outside the tolerance thresholds for normal use. Well clearly Motorola and Verizon are just scamming customers and ripping them off. How convenient for Motorola to automatically tell a client all screen failures are due to customer damage. We should have stuck with iPhones and the AppleCare. Apple stands behind the quality of their products and would have never questioned replacing a phone for a defective LCD, i.e., no broken glass, just screen failure. You get a replacement on the spot. Oh but not Motorola—mail it in and then you are without a phone for how long??? We are going on 24 days now. Motorola got the phone and sent a picture of the phone screen (included) and said it was physically damaged—said it would cost $99 to fix—interesting how that is the same amount as the Verizon insurance deductible. Really--they are insulting my intelligence... I called them up and told them to provide me the accelerometer data—I wanted proof the phone was damaged by us and not defective. They still have the phone and have not responded to my request for over a week now. I told customer service that Motorola should be ready for a fight—we will file a report with the FTC and the BBB if they don't repair or replace the phone at no cost. I am very angry about this poor customer service. If we dropped the phone and cracked it up, well that is what insurance is for and that is why we bought the insurance. I would not expect Motorola to fix a phone for free if we broke it, but this is not the case and it is just outrageous. I am worried the same thing will soon happen to my RAZR HD which has overheated while it was charging. The phone is so thin that any expansion in the case is going to put pressure on the LCD. I am wondering how we are going to make it through a 2-year contract with Verizon when the Motorola phone can't even handle normal mobile use. I used my AT&T iPhone 3Gs for over 3 years before switching to Verizon and the RAZR HD and the iPhone still works well as a Smart device for email, photos and music. Clearly Apple has a superior product and also knows how to take care of customers. We called Motorola customer service again today since we aren't seeing any information online regarding the current status of our phone, and they couldn't even tell us what the status is. They have had the phone for over 2 weeks. If Motorola doesn't do what is right, they will lose us as customers. This is so frustrating.
After updating to Lollipop 5.1, I noticed my screen is blank after using any app (messaging, GMail, etc.) and it won't come back. Calls and texts and other notices come (can actually answer calls and see the call screen) through, but home screen and any adjacent screens are all black. The status bar and icons are visible though and I can use the pull down menu. It's as if it is refreshing but never gets to the end. I installed many apps, even used a stock wallpaper), but it still will do this. I have to keep rebooting until it eventually stops; I check it by using a random app and seeing if I can see the screen by pressing the Home button. I also wiped the cache partition after the OS upgrade.
Was this feature removed from calendar events? I use it frequently and it doesn't always automatically pick up the number+meeting code from the appointment but is generally pretty good. So the last few call it wasn't working and I decided to try and add it manually but can't enter it. Is this a feature that isn't included in the Motorola software or was it removed from JB?
Is there a setting that would allow the volume to be adjusted while in a call without taking the phone away from my face. the volume key should not lock out when the screen turns off during a call.
I have had a lot of trouble with my phone, I make a call and it connects with the party. But they say I am connected but they can not hear me and I can not here them! Also I do not here any ringing to the other party. If I reboot the phone it works, but after an hour or so I have to do the same thing again..... (reboot).
Downloaded ICS on July 13th. Since then, at least 2 times (possibly more if I was away from my phone when it happened), my phone has randomly started ringing without any incoming calls, alarms or calender appointments set, emails, messages, etc. The only way I could make it stop is to shut the phone down. The volume of the ringing isn't as loud as my set volume, but there is no way to silence it aside from shutting down the phone. Never did it before the system update. I'm not positive if it happens at the same time each time, but it was around 4:17 PM yesterday when it did it.