Motorola Atrix 2 :: Mute When First Receiving A Call?
Nov 7, 2011
Had my Atrix 2 for a week and some times when I answer the phone no one is there.They can hear me perfectly well but my phone is dead quiet. Yes I've checked to make sure I haven't accidently hit the mute when answering. There is just no sound coming from the phone. Only a battery pull while powered on will restore the speaker function.Doesn't happen all the time, just enought to be annoying. Had taken back a SGS2 for this phone so I am stuck on this model and frankly I like it way better.AT&T didn't have any answers other than just hard reset it.
I recently had to get a replacement Atrix through AT&T after my original one shattered. I had insurance and AT&T provided me a refurbished one through their insurance program. My question is, will I still be able to get all future updates on this phone or is there something I need to do?
Was just wondering if its possible to mute the incoming call ring without rejecting the call? I have seen that feature in some htc phones and tried on my phone but it didnt work.
This appears to be a common problem with no resolution (having just done various Google searches). On 2.3.4 with Orange. Always vibrate ticked with sound off I dont get any vibration for incoming SMS. I've tried various combinations a nd can't seem to resolve it. The vibrate option in messaging is also turned on. I think it used to work but can't be sure.
On several occasions my wife has not received my text messages. (It happens every now and then.) I see the receipt, on my phone, that it was sent to her, but she didn't receive it. Does that mean there is something wrong with my phone or her's. I use Handcent SMS app. and my wife has a Palm Pre Plus phone. Note: This happened a few times with my backflip too.
I have had my Photon about 6 weeks and have been having issues where people can not call me they get message that phone is not available. Also when I am having those issues the phone will not dial anybody just stays on dialing screen and does not call. Also texts do not come through during that time.If I reboot then I can dial and receive calls for a half day or sometimes a whole day.My phone does get the random reboots started on day one and usually once or twice a day but NEVER has happened while I was actively using it.I have done factory reset. Pulled battery and replaced.
My phone was updated with the latest firware on the day I got it and I check for updates regularlyI do have an SD card in it that was new never in another phone that was formatted by this phone. I have tried using it without card and with card makes no difference.I have started rebooting every morning but I still miss calls.At first I had Google Voice on it, I thought that might be the problem I unloaded it unlinked my google voice account and then did factory reset but that has not helped.I do not tether or use the hotspot feature. I do connect using Wifi when I am at home for internet access.About the only thing I can tell is that it seems to lose phone access after a good amount of web surfing whether it is wifi or 3g. (I live several blocks outside of 4g cover
I am using the Sony Xperia Neo v mobile for last 2 months and recently I discovered that I am not able to put the call on mute while on a phone call. Is this feature not available for this phone or I am not looking at the right place ?
I have been having an occasional problem with my Motorola Atrix 4G when making cell phone calls. The phone not only disconnects from the person I am talking to, but powers down as well. If it just disconnected I could immediately call the person back, but instead, I have to go through the power on sequence and then call the person back which takes considerably longer.
how to lock the touch screen during a call? I have had very embarrassing moments of the world hearing my conversation when the speaker phone activates.Is there a way, without setting a password to lock, as this then stops me from answering a call on my carkit
I use my Atrix 4G on AT&T to make calls and use my Motorola S305 Bluetooth headset. The problem is, Atrix does not let me do any browsing as long as I am on the call. I have the same problem when I am using the speaker phone too.
Since I got my Atrix about two months ago, I have had several issues that I have seen posted and am still awaiting a fix. Like horrible call signal when iPhone has no problem, security lock timer, voice quality from my handset, but I have not read about this other one with the Incoming Call. This issue is very random for me, but when people call me, usually I get their image in the middle and what looks like the lock screen, with one bar on left and right that can be swiped to answer or hang up. This is the screen that I get maybe 75% of the time, but every so often I get another Incoming call screen that doesn't have the bars that swipe, but at the very bottom it has two large buttons, a green one to answer and a red one to ignore. I know not a big deal, you either swipe or press a button right? Well it also affects the ringtone, when I get the slider buttons, the ringtones work fine, but when I get the buttons, it uses the original default ringtone, not even the default ringtone I have setup on the phone. I don't have any other dialer or call log app installed, I just set up my ringtones in settings and choosing individual users. Anyways, I like the button screen dialer, better than the default swipe one, but is there a way I could set a default and not get different incoming call screens.
I have tried many apps from the market, but it does not record the conversations of the call. Is any application or any way to record a call in this phone. Running on Android 2.3 still.
Immediately after the phone connects to the Bluetooth built in car phone, the "bluetooth in-call volume" of the phone goes to 0. I can't hear a caller until after this volume is raised. I can only adjust it during a call using the volume control on the phone. It stays at that level until the BT disconnects, but the volume is again 0 after reconnecting.Is there anyway to permanently set this volume level? It is a complete pain otherwise. If I can change the volume before a call, not only during, that may be acceptable.More info: I have a Motorola Roadster external phone headset, too, and it doesn't behave this way. The car manufacture claims it is the phone that sets the volume not the car. The car has the latest firmware.
I go to the Phone Dialer and make a call. Few seconds and or a 1/2 ring and then the phone goes "Boop" and reverts to the lock screen. Sometimes the slider will not work or the Lock screen freezes, until you reset via the power/reset button on the back of the phone.
I just had a very fatal issue with my Atrix, it would not let me answer a phone call. Yes I did get this phone to actually talk on it.The phone was locked and the screen showed to answer the call with the big Green and Red buttons, but the green one to answer was covered by a popup window with details of the contact calling. I think it was details in the memo field.
I am having a few problems with setting up my nokia ck-100 handsfree kit on a 2004 audi a4 (standard concert system) I am just using the standard iso connector. It connects with the phone and performs all functions except.
1. it only uses the centre console speaker and while the phone is connected there is a constant hiss until it disconnects or the call ends.
2. The radio doesn't mute when a call is made or recieved.
I just updated to 442 and everything else seems fine except for the fact that when on a call, as soon as the backlight times out, it mutes the mic and the party on the other end cannot hear me. Clicking the trackball "unmutes" the phone until the backlight times out again. This happens whether I'm on speakerphone or not.
I posted this in the actual OS thread as well but figured someone in here may read this and know of a solution.
I've done quite a few battery pulls hoping this would resolve the issue but it hasn't.
The nice thing about upgrading from 296 to this is when you are on a call and the backlight times out, the screen and everything but the 4 buttons on the trackpad row go dim. So if its dark you can still find these 4 buttons rather easily. I just wish I could figure out this mute issue.
See this call screen? This just started happening to me the other day and I don't know why. Something must have changed, but I don't know what it would have been. Instead of the normal 6 tiles at the bottom, I have only three now. I cannot mute the line or go to a dial pad. I am chatting with Samsung support about it but they are clueless so far. We have tried a soft reset, resetting the Cache and Data for the Phone App, resetting app preferences and Safe Mode and nothing has worked.
I'm having a problem when I enable wifi, the phone switches to 4G (in the status bar) and has 1 bar, but then I cannot make or receive calls. If I disable wifi for data, then the phone switches to 'E' (in the status bar) and has 4 bars. I can then make and receive calls.
How do I get in-call audio to play on my car speakers? If I plug in Car AUX to the headphone jack, in-call audio and music both play over the speakers... however if my Atrix is in the craddle, music plays over the speakers, but calls are in speaker-phone mode through the phone speakers.