When I searched around for iPhone cases, I couldn't find any that covered the buttons and the back of the phone. I also could not find any screen protectors. The only case was the Zagg stick-on case, and I don't really want that little shock protection. Does anyone know if there will be more cases by the 24th, when my iPhone is due?
View 4 RepliesI just sold my 3G a couple days ago and picked up a cheap 3GS. I love it so far. The only thing is, is that the back cover is all sratched up and has like 30 dimples on it. So I want to replace it for a new cover but I don't know where I can get it, I tried to search e-bay but all I found is phone cases that go on top of the cover that I want.
Can anyone post up links to where I can get one? It would nice if I could also get a new chrome bezel trim piece too because that's damaged too.
i have 8530 and i want a case that has a cover for the screen... i hate with a passion the film protectors, for me its impossible to get all the bubbles out and make it look good... So i was wondering if there is a case that will snap on or something to that effect that would cover the screen..? Hopefully they do if not my screen wont be readable for long i dont know how i get so many scratches on it but i do..
View 10 Replies View RelatedI could not find a rubber cover/case. I bought the plastic hard rubber item that is fake paint that looks like rubber and scrapes off real easy. The plastic underneath is white so it looks like crap after a few weeks.
View 1 Replies View Relatednow I know why they take out the slider on N97 mini. It's a megnetic switch under the slider.that means, you can not use megnetic leather case as it will activate the camera even when it's locked.I must have my leather megnetic case.
View 8 Replies View RelatedCan i change my black case with keypad (cover) of nokia e63 to any other colour?? Where will i get a new case or cover ??how much rupees i must spend??
View 1 Replies View RelatedAfter recently buying a new Milestone outright I'm looking to protect the hell out of it. I currently have purchased a hard case for the phone itself (seidio innocase) as well as a screen protector.Now the next thing that I am looking for is a good Vertical case/pouch.The thing is that it must be vertical and it must be open at the top (I don't want a cover at all.I want to be able to slide the phone in and out easily). I also must have a belt clip on it.I have found a few online, but for what reviews that I have read stated that they are hard to get the phone in and out of when the phone is naked (no case on it). Since I am planning to have the phone in a hard case at all times that particular case will not work for me.
I have seen the pDair case and it looks good, but $28 USD plus shipping (to Canada) I want to make sure that the phone (in a hard case) will fit in it. I havn’t found any reviews on it as of yet either.I know that the iphone & Nexus One are about the same size as the Milestone and wonder if anyone has tried any of those cases with success? As I am sure (especially for the iphone) that there is a wider selection of cases available.
I have a otterbox case, love it. But when I try to use my 4 hard buttons on the lower bottom of my droid x they dont work. I take the case off and the phone is back to normal
View 15 Replies View RelatedContrary to the posts I've seen (buttons do not turn ON), my issue is the inverse (buttons do not turn OFF). My HTC One's Home and Back buttons are always lit, even if I turn off the device.
Is this a hardware or a software problem? Could there be something I can install to fix it, i.e. like a missing driver?
This is a brand new phone, and out the box, the capacitive buttons are off. When I turned it on, the lights were behaving fine and after using it for quite a few hours, I decided to reset the phone again since I wanted to set it up from scratch.
I have gotten the inside of my phone wet and now the menu and back buttons click on their own, it's really annoying so I just want to disable the buttons and use assistant cursor that is built in the phone.
View 12 Replies View RelatedI got a bumper but I like a bit more bulk in my phone (3g/s with incase was PERFECT). I would also prefer something to cover the back.
View 6 Replies View RelatedI'm having an galaxy s6 and 3 days ago the back and menu buttons stopped to work. I've try to reset the phone to default and it doesn't work.
View 2 Replies View Relatedwell iPhone 4 backs are extremely easy to take off, unlike previous iphones where you basically need to dissassemble the entire phone starting with the screen, and void warranty to get to the back, the iPhone 4 back comes off by just unscrewing the 2 bottom screws. also Its possible to replace the back cover without voiding warranty, or leaving any evidence it was ever replaced.
If iphone 4s had the capacity laser etched on the back, apple employees would just look at the back of the iPhone to see capacity to know what capacity iPhone they should replace it with (i have seen them do this). Even if they go into settings to check something else, there is still a chance they will not look or forget to look at the capacity in the about section.If the iPhone 4 had the capacity etched on the back cover, a person could have just replaced his 16GB iphone's back cover with a 32GB one bought off ebay or something, ask for a replacement for whatever reason, and there could have been a good chance the "genius" would just look at the back of the phone, see that it is a 32GB unit, and give a 32GB iPhone as a replacement.or they could have decided not to etch the capacity on the back for cosmetic reasons
3710 How do I get the back cover off? I had it off once to put the battery in; now it appears to be stuck.I 'm trying to follow the pictorial instructions, but it is not budging.
View 4 Replies View RelatedWhen I turn on my Samsung Galaxy S5 a message comes up telling me to check the rear cover is sealed properly before use. I've checked it & it seems well sealed but the message still appears.
View 2 Replies View RelatedI've used all my force to push, but it simply wont give in. It's solid. I push in, and trying to slide it out.
View 1 Replies View RelatedThe back cover does not stay, so the back of the phone is open all the time. I checked and saw the two small clips at the botom conners of the cover are broken.So where can I find a replacement of the cover?
View 2 Replies View RelatedRecently I got a new 'refurbished' Bold 9780 from Vodafone, I wanted to use my holster that I got from the box (the official one) , and whenever I put my blackberry in its fine, but when I take it back out the back cover (battery cover) slips off with it. I'm not sure why this happens, I put it in the correct way and everything. Maybe my case is loose? But I've tested the back cover, its perfectly on and doesn't jiggle about.
View 4 Replies View RelatedThis is the second 710 that have the same issue. The back cover around power button is starting getting loose after a week or 2 of usage. If I push the area slightly with my finger, it makes light noise. It is fatal problem but very annoying.The reason might be the plastic cover is not strong enough to stick to the phone body.
View 4 Replies View RelatedThe back cover of the Droid 4 can fool you -- it looks like a typical slide-down-with-pressure-to-remove cover. But there's a trick. There's a small pinhole on the black panel at the top rear, where the camera lens and flash are located, just to the right of "HD 1080P." That's the lock. If you insert a pin or other small object into that hole, it releases the back cover and it slides right off.
View 13 Replies View RelatedI recently bought my blackberry the other day and it's been working great. However today I notices the back cover keeps making weird clicking noises whenever pressure is applied. Everytime I go to pick it up in my hand to text, the cover makes this noise. It appears to be due to a pocket of air between the cover and the battery but the noise is getting really annoying.
View 2 Replies View RelatedWhat is the best way to snap back cover in place? Whatever sequence I use it seems that one of the plastic latches doesn't engage.
View 3 Replies View RelatedI have a new storm 2 for Verizon and the back cover scratches real easy. I wanted to know if anyone knew how to get rid the the scratches? I have a cover on it now but they happened right away.
View 11 Replies View Relatedthe one thing that bugs the crap out of me is that the hard grey back cover doesnt line up flush with the softer top black peice where the speakers and camera are. it came out of the box this way. its only on the right side though (if im looking at the screen). it is perfectly fine on the side where the camera and power button are and fine in the center.i know to some this may seem trivial especially if you dont have this issue but i feel like i paid A LOT for this device and should have the quality build that was intended by motorola and was expected by me. the consumer.is this something that i could send in to moto to get adjusted? am i better off trying to "fix" it myself? am i alone in this issue?
View 1 Replies View RelatedPosting because I don't know if anyone else has this same problem or not with cases. With my iPhone 3GS, I put an ifrog case on it and an encase. I also used a zagg shield. Worked great! After about 8 months of using that set up I noticed that dirt dust whatever gets in between the case and the phone and scratched he phone up pretty bad. My bezel is scratched, the plastic back is scratched. WTF. Now I am reluctant to use a hard case on my new iphone or iPad. Anyone else experience this?
View 18 Replies View RelatedWell long story short my blackberry storm died today and verizon is sending me a replacement, and was nice enough to send me a storm 2 as a replacement only bad news is, the storm 2 replacement does NOT come with a battery door.so my question is, does the blackberry storm battery door fit the storm 2? if not,
does anyone know any reliable websites where I can get a blackberry storm 2 battery door?
Is there any news on any good ones? If so can we post them here just so everyone can see them. I don't think the bumper case protects it to much I could be wrong but I could be wrong
View 9 Replies View RelatedCan i change my red black x3 cover to blue silver cover?Is it available?
View 2 Replies View RelatedGot my Defender the other day. I noticed that when the phone is in the case the proximity sensor stops working. I take the phone out and it work fine. I emailed Otterbox and the guy said to clean the plastic window. Really?? you dont think I tried that before sending the email? I am going to try my brothers case to see if its the case. My brother told me that he had the proximity sensor issue before the case and now his works fine. My last step is to reload 4.0.1 but I have to figure out how to get a video off the phone first.
View 11 Replies View RelatedMy baby dropped my Lumia 1520 and now the speaker is dead (no ring and music at all) also the home and back buttons are always dark (no light at all but they work fine).
View 3 Replies View Relatedi know the back button and menu buttom supposed to be white and i checked with 2 friends of mine that also got the s6 and its white in their phones. also the home button is kinda moving but not so much... when i checked with my friends phone it wasn't moving. you think i should use my warranty for such a stupid thing? also the device is original and not fake. the screen sometimes (it didn't happen me in 5 days and today it happend again) the touchscreen stop responding to my finger for about a second. lets say i want to click an app so when i first clicked it it didn't work but when i tap again it worked. i think this is normal because sometimes you dont press very well.. any way. orange back and menu buttons and tell me if you got it to(inside a house,outdoor its white because of the sun) and the home key that is kinda moving (not so much but a little bit more than my friends does)
View 2 Replies View Related