BB Bold :: 9780 Back Cover Comes Off With Holster?
Apr 30, 2011
Recently I got a new 'refurbished' Bold 9780 from Vodafone, I wanted to use my holster that I got from the box (the official one) , and whenever I put my blackberry in its fine, but when I take it back out the back cover (battery cover) slips off with it. I'm not sure why this happens, I put it in the correct way and everything. Maybe my case is loose? But I've tested the back cover, its perfectly on and doesn't jiggle about.
The back cover does not stay, so the back of the phone is open all the time. I checked and saw the two small clips at the botom conners of the cover are broken.So where can I find a replacement of the cover?
My company BB Bold 9780 synchronises agenda's between MS Outlook and my device calendar. Some time ago an daily recurring Outlook calendar entry was deleted, but it still shows on my BB calendar. When I delete this recurring entry from my BB it comes back one day later. I therefore want to reset my calendar, but when I connect via BB Desktop Mgr it does not allow me to delete my calendar entries. I do not know what to do anymore and I find it rather frustrating to delete the entry every day or leave it in my BB calendar.
My boss has a BB Curve 8530 and she wants to set it up to vibrate only in holster and ring outside of holster. Is this an option I can set up in Profiles? If so, do i have to adjust this option for every sound (i.e. MMS, e-mail, alerts, etc)?Or there an easy way to adjust these settings? I'm not very familiar with the BBs so please be gentle.
3710 How do I get the back cover off? I had it off once to put the battery in; now it appears to be stuck.I 'm trying to follow the pictorial instructions, but it is not budging.
When I turn on my Samsung Galaxy S5 a message comes up telling me to check the rear cover is sealed properly before use. I've checked it & it seems well sealed but the message still appears.
well iPhone 4 backs are extremely easy to take off, unlike previous iphones where you basically need to dissassemble the entire phone starting with the screen, and void warranty to get to the back, the iPhone 4 back comes off by just unscrewing the 2 bottom screws. also Its possible to replace the back cover without voiding warranty, or leaving any evidence it was ever replaced.
If iphone 4s had the capacity laser etched on the back, apple employees would just look at the back of the iPhone to see capacity to know what capacity iPhone they should replace it with (i have seen them do this). Even if they go into settings to check something else, there is still a chance they will not look or forget to look at the capacity in the about section.If the iPhone 4 had the capacity etched on the back cover, a person could have just replaced his 16GB iphone's back cover with a 32GB one bought off ebay or something, ask for a replacement for whatever reason, and there could have been a good chance the "genius" would just look at the back of the phone, see that it is a 32GB unit, and give a 32GB iPhone as a replacement.or they could have decided not to etch the capacity on the back for cosmetic reasons
I just sold my 3G a couple days ago and picked up a cheap 3GS. I love it so far. The only thing is, is that the back cover is all sratched up and has like 30 dimples on it. So I want to replace it for a new cover but I don't know where I can get it, I tried to search e-bay but all I found is phone cases that go on top of the cover that I want.
Can anyone post up links to where I can get one? It would nice if I could also get a new chrome bezel trim piece too because that's damaged too.
This is the second 710 that have the same issue. The back cover around power button is starting getting loose after a week or 2 of usage. If I push the area slightly with my finger, it makes light noise. It is fatal problem but very annoying.The reason might be the plastic cover is not strong enough to stick to the phone body.
The back cover of the Droid 4 can fool you -- it looks like a typical slide-down-with-pressure-to-remove cover. But there's a trick. There's a small pinhole on the black panel at the top rear, where the camera lens and flash are located, just to the right of "HD 1080P." That's the lock. If you insert a pin or other small object into that hole, it releases the back cover and it slides right off.
When I searched around for iPhone cases, I couldn't find any that covered the buttons and the back of the phone. I also could not find any screen protectors. The only case was the Zagg stick-on case, and I don't really want that little shock protection. Does anyone know if there will be more cases by the 24th, when my iPhone is due?
I recently bought my blackberry the other day and it's been working great. However today I notices the back cover keeps making weird clicking noises whenever pressure is applied. Everytime I go to pick it up in my hand to text, the cover makes this noise. It appears to be due to a pocket of air between the cover and the battery but the noise is getting really annoying.
I have a new storm 2 for Verizon and the back cover scratches real easy. I wanted to know if anyone knew how to get rid the the scratches? I have a cover on it now but they happened right away.
the one thing that bugs the crap out of me is that the hard grey back cover doesnt line up flush with the softer top black peice where the speakers and camera are. it came out of the box this way. its only on the right side though (if im looking at the screen). it is perfectly fine on the side where the camera and power button are and fine in the center.i know to some this may seem trivial especially if you dont have this issue but i feel like i paid A LOT for this device and should have the quality build that was intended by motorola and was expected by me. the consumer.is this something that i could send in to moto to get adjusted? am i better off trying to "fix" it myself? am i alone in this issue?
I recently switched from a Bold 9000 to a new Torch 9800 with the new OS 6.0. On my Bold I could set one ringtone for In Holster @ one volume and a different ringtone @ a different volume for Out Of Holster within the same profile. So far this seems impossible with the new operating system. Seems I can only set one ringtone and one vibrate for each profile. Am I missing something?
I recently downloaded the new update for my Blackberry Tour, and I have noticed that my phone is not remembering its settings (im assuming). When I have my phone holstered, it only vibrates twice and does not ring (though I have it set to Always for the ringtone) for my MMS/SMS messages. When its out of holster, it will only do the default text messing sound. I am not sure how to fix this though I have rebooted it twice in attempts for the settings.
Well long story short my blackberry storm died today and verizon is sending me a replacement, and was nice enough to send me a storm 2 as a replacement only bad news is, the storm 2 replacement does NOT come with a battery door.so my question is, does the blackberry storm battery door fit the storm 2? if not,
does anyone know any reliable websites where I can get a blackberry storm 2 battery door?
I have had my phone for over a year with the OEM holster and it would put my phone to sleep, however for the last 2 days when i put the phone in, nothing happens...am i missing a setting or is this probably a hardware issue and i am then SOL
When in holster and I receive a call, my 9700 will only ring once, even if the caller is still on the line. I am using the Normal profile, and the phone setting for Normal is set to Play sound = Always. I also checked the set ringtone alerts, and the Play sound = Always as well.I am running OS 5.0.0.545. is this a bug?
My wife and i have had blackberrys for 4yrs but the two new 9700 are driving me mad !! Whilst in the holster they only ring once so missing loads of calls and when you pull the device from the holster it is not locked and the settings are telling me it should be. Checked all settings and they are correct. Running V5.0.0.586 (PLATFORM 5.1.0.146).
I have a BB9900 and in the beginning it was able to respond and go into sleep mode when its place inside the holster. However, recently it started to stop responding to holster.
I have the ring tone on 9900 set to always so it should keep ringing in and out of the holster but when I take it out of the holster the ringtone stops. My 9300 did exactly the same thing. I've changed it 'out of holster' ringtone which works as does in holster but when set to ring always it stops out of the holster.
My 9700 rings ONLY ONCE while it is in the holster. The settings regarding vibration doesn't change this.What should I do to have my 9700 ringing several times while it is in the holster?
Bought Blackberry Bold 9900 and have one of those defective holsters because upon inserting the phone into the holster one of the keys got ripped off. When I went with the guarantee to the store. The key is still press-able; the people from the store told me that the keyboard must be changed with the underlying circuit board.
I searched and searched and searched but I couldn't find a way to change the in holster settings. This is what I have tried so far: Profiles>Edit normal> ?? No holster settings ? options>Password> Lock Handheld Upon Holstering
