I have a BB9900 and in the beginning it was able to respond and go into sleep mode when its place inside the holster. However, recently it started to stop responding to holster.
View 2 Replies
If I use the holster that came with my 9930, it goes into sleep mode like it is supposed to, but I don't like that holster. It's too difficult to remove the BB from those holsters, when you grab it to slide it out, you also push the volume up key.I prefer the face-in spring loaded belt holster like I used with my Bold 9650. I am using ones designed for the Bold 9000 and they fit, but the holster sleep mode doesn't work. I tested the holsters with an old 9000 and they do work correctly, but no luck with the 9930 - as if the magnets are in a different location.
View 5 Replies View RelatedI'm a proud owner of a new Bold 9900 bought today. However, just now i was trying the Holster and it doesnt work. I believe the magnet is placed abit too low. As when I tried my phone placement outside the holster it seems to be able to auto lock if i placed it abit lower. Is there any way to get the holster replace?
View 1 Replies View RelatedAt the moment I have 7.1.0 but does 2061 on orange, recently updated, I did a battery pull but no change, and all my apps are up to date. Before the update I was having trouble with my Trackpad, so I deleted the social feeds and blackberry messenger as an attempt to improve the battery, the battery did improve and so did the problem with the trackpad. But when I did updated my phone software blackberry messenger had come back and I was unable to delete it and then the trouble with the Trackpad started again. If that is the trouble how can I delete it so I can use the trackpad again?
View 1 Replies View Relatedmy trackpad on my bold 9900 is not responding to swipes at all, i have adjusted the sensitivity, tried many battery pulls, tried wiping it with paper (suggested by someone on Internet) but nothing is happening, i would say that it is a hardware issue as nothing has been changed in relation to the software and the touch screen is still responding fine.
i can press the pad down and it works, but not to any swipes
My Blackberry randomly stops responding on different applications, and then i have to hold the menu button and switch to a different application, and i won't be able to use the un-responsive application until the blackberry is given a hard reset. Also during this time, my BBM will mess up, It won't show me peoples display pictures, it will show that their there when im in a conversation or over their name, but as soon as i go onto their profile or enlarge their image it will freeze, it will not let me send or recieve BBM messages during this 'phase' either, I've tried reloading the OS but that won't work either for some reason.
View 1 Replies View RelatedI am facing the same issue on my 5 day old 9900. The touch screen just stopped working on the 2nd day & it has come up since then. I have tried the following to correct the issue but, no success:
1. Cold Reboot (Pull battery when device is on)
2. Simple Reboot (Pull battery when device is OFF)
3. Remove battery then, SIM & SD Card, plug in battery then pull it again & put everything back in
None of these worked, my OS version is v7.0.0.261 Bundle 1346 Platform 5.0.0.464 Should I update my phone software? Each time I try to check for an upgrade it says you have the latest one.
With my old BB Bold, I had my phone set to vibrate for messages and phone calls when in the holster. When out of the holster, I had the phone ringing with my personal ring tones while everything else vibrated.
I cannot figure out how to do the same with my new Curve 9900.
My boss has a BB Curve 8530 and she wants to set it up to vibrate only in holster and ring outside of holster. Is this an option I can set up in Profiles? If so, do i have to adjust this option for every sound (i.e. MMS, e-mail, alerts, etc)?Or there an easy way to adjust these settings? I'm not very familiar with the BBs so please be gentle.
View 4 Replies View RelatedI recently switched from a Bold 9000 to a new Torch 9800 with the new OS 6.0. On my Bold I could set one ringtone for In Holster @ one volume and a different ringtone @ a different volume for Out Of Holster within the same profile. So far this seems impossible with the new operating system. Seems I can only set one ringtone and one vibrate for each profile. Am I missing something?
View 1 Replies View RelatedI recently downloaded the new update for my Blackberry Tour, and I have noticed that my phone is not remembering its settings (im assuming). When I have my phone holstered, it only vibrates twice and does not ring (though I have it set to Always for the ringtone) for my MMS/SMS messages. When its out of holster, it will only do the default text messing sound. I am not sure how to fix this though I have rebooted it twice in attempts for the settings.
View 4 Replies View RelatedI have had my phone for over a year with the OEM holster and it would put my phone to sleep, however for the last 2 days when i put the phone in, nothing happens...am i missing a setting or is this probably a hardware issue and i am then SOL
View 6 Replies View RelatedWhen in holster and I receive a call, my 9700 will only ring once, even if the caller is still on the line. I am using the Normal profile, and the phone setting for Normal is set to Play sound = Always. I also checked the set ringtone alerts, and the Play sound = Always as well.I am running OS 5.0.0.545. is this a bug?
View 6 Replies View RelatedMy wife and i have had blackberrys for 4yrs but the two new 9700 are driving me mad !! Whilst in the holster they only ring once so missing loads of calls and when you pull the device from the holster it is not locked and the settings are telling me it should be. Checked all settings and they are correct. Running V5.0.0.586 (PLATFORM 5.1.0.146).
View 7 Replies View RelatedHow do I get my BB 9930 to ring in my holster?
View 2 Replies View RelatedI have the ring tone on 9900 set to always so it should keep ringing in and out of the holster but when I take it out of the holster the ringtone stops. My 9300 did exactly the same thing. I've changed it 'out of holster' ringtone which works as does in holster but when set to ring always it stops out of the holster.
View 2 Replies View RelatedMy 9700 rings ONLY ONCE while it is in the holster. The settings regarding vibration doesn't change this.What should I do to have my 9700 ringing several times while it is in the holster?
View 9 Replies View RelatedBought Blackberry Bold 9900 and have one of those defective holsters because upon inserting the phone into the holster one of the keys got ripped off. When I went with the guarantee to the store. The key is still press-able; the people from the store told me that the keyboard must be changed with the underlying circuit board.
View 5 Replies View RelatedI searched and searched and searched but I couldn't find a way to change the in holster settings. This is what I have tried so far: Profiles>Edit normal> ?? No holster settings ? options>Password> Lock Handheld Upon Holstering
View 6 Replies View RelatedIf my phone is in its holster when it rings, when I pull it out of the holster it silences the ringtone. Is there any way to stop it from doing this?
View 14 Replies View RelatedAnyone having a problem with the phone locking when in holster? I have the setting right but it doesnt lock when I put it in the OEM holster. Even when I pass the flap magnet all over the phone nothing locks. Any ideas?
View 6 Replies View RelatedI've been using my Bold 9650 in the holster while I work out in the gym and I've been listening to Pandora. I've noticed that the volume controls on the right side of the device will not work while the device is in the holster. If I take it out of the holster, the volume buttons work fine. Is there any way to enable these buttons while the holster is being used? I would have thought that they would automatically work by default.
View 2 Replies View RelatedRecently I got a new 'refurbished' Bold 9780 from Vodafone, I wanted to use my holster that I got from the box (the official one) , and whenever I put my blackberry in its fine, but when I take it back out the back cover (battery cover) slips off with it. I'm not sure why this happens, I put it in the correct way and everything. Maybe my case is loose? But I've tested the back cover, its perfectly on and doesn't jiggle about.
View 4 Replies View RelatedI am wondering if I change this...whenever my bold is removed from holster when ringing, my ringtone automatically changes to the tmobile jingle. Is there anyway to change this?
View 4 Replies View RelatedI'm using BB Bold 9700 Version 5.0.0.593. Why is it when I put my BB in holster, my network will always get disconnected after a while? Sometime when I using half way will get disconnected. Do I need to do any setting to keep it connected.
View 5 Replies View RelatedJust upgraded from bold 9000 to 9700. I upgraded my OS to version .743. After that, I stopped getting visual voice mail notifications. The message is there when I dial "1", but doesn't show up at all under the VVM menu, nor do I get the visual indication(s). It did work on the AT&T OS out of the box. Second issue with this O.S.- phone does not lock when it is in the holster. I have to believe both these issues are with the .743 version of the OS, but I may be missing something. I've read others with the VVM problem, not none of the threads seem to offer a solution except to say that AT&T WAS having issues with this back in November.
View 5 Replies View RelatedMy Blackberry Bold 9900 is not turning on.Details: A battery pull has not fixed my problem.I tried using another 9900 battery, however it did not work.My battery does not work on other 9900 devices.There are no signs of moisture, nor has there been contact with water.The LED light doesn't show, nor does anything on the screen.
View 1 Replies View RelatedSo the 'Normal' profile of my 9700 (Phone) is set up to play ALWAYS simply because it is on my desk in the office, it is not in the holster, and I want to hear when it rings.
I also have a ring tone that I downloaded (not the default).I noticed that when the phone is in the holster and it rings, as soon as I take it out from the holster the ring tonne changes from the one I set up to the default AT&T ring tone.
Is anyone else having trouble using the "Vibrate in Holster" setting? My 8330 would automatically switch to vibrate when I put it in my holster that has the magnetic closure. My 9650 fits in the same holster but doesn't seem to switch to vibrate even though I have that setting chosen under my sounds profiles.
View 7 Replies View RelatedI have just tried to use my app world and its not responding. I have used it in thye past.I click the icon and nothing happens?I have tried to turn the phone off, nothing happens I have taken battery out and re start it still nothing,I have stopped short of throwing it at the cat.
View 1 Replies View RelatedWell i finally got a new 9650 bold backed up data from my old curve then restored on my new then saw an update and decided to do that as well..After that the software is great but then i txt prople and it keep freezing sayingUncaught Exception:Application net_rim_bb_messaging_app (285) Is not responding: Process Terminatedand i keep having to turn it on and off?
View 1 Replies View Related
