So last night my phone randomly froze and rebooted into the command page with the little android guy saying no command. So I had to reboot system and all is well.
View 3 RepliesSo I am at work and my 6P had to have just rebooted itself over 25 times in a row. It would go to the lock screen and then repeat. I finally got it to stay off for a few minutes then turned it on and its working again....
View 3 Replies View RelatedYesterday i got notification with new update that i have to setup, so after charging my phone at night i started the update this morning then boom I can't start my nexus anymore...
First I got message ( your device is corrupted. it can't be trusted and may not work properly ) although i didn't make any custom rom nor recovery nor unlock my boot loader
Second I got No command error , then boot loop all the way .....
After some google i tried to press power + volume up and down to enter recovery ( the stock recovery ). I did wipe cash + wipe data factory hoping it solve the problem but seems no way
Also i read Heisenberg's How-To Guide For Beginners many times and downloaded last Stock img but can't install it via fastboot cause i didn't activate usb debugging before nor âEnable OEM Unlockâ so i can't even unlock my nexus.
Recovery version :
angler
6.0.1
MMB29P
And this is getvar all :
(bootloader) version:0.01
(bootloader) unlocked:no
(bootloader) hardware-revision:ANGLER-VN2
(bootloader) version-baseband:angler-02.50
(bootloader) version-bootloader:angler-02.45
(bootloader) display-panel:
[Code] ....
I noticed there were 2 newer images on the Google developers page and thought I would flash the latest and greatest (MDB08M) since it wasn't coming down OTA. I enabled Developer Options and set USB debugging and OEM unlock, rebooted to bootloader, did a fastboot oem unlock, rebooted then back to bootloader and ran the flash-all.bat from the new image, rebooted and all was well. I re-enabled USB debugging and went back to bootloader to re-lock the bootloader and am getting an error:
...
FAILED (remote: unknown command)
finished. total time: 0.016s
Results of fastboot getvar version-main are blank:
version-main:
finished. total time: -0.000s
I rolled back to MDB08K but it made no difference. I then tried rolling back to MDA89D and letting it pull MDB08K OTA but that too made no difference.
My iphone 4S froze and got "hot". All I had was an asterisk on the screen so I rebooted it as suggested. Now I wonder if I should be turning it off more often?
Info:
iPhone 4S
I held my device out of the sun roof to record a Snapchat while my friend was driving highway and after a couple seconds my device rebooted. I just want to know if there is some sort of explanation for this.
View 3 Replies View RelatedI have a blackberry bold 9000, recently ive been having some problems with it, i did a routine battery pull while the phone was frozen, when it rebooted the arm on the loading screen went around twice then the phone rebooted again, it repeatedly does this until the phone dies, if i hook it up to the charger....same outcome, i am a poet and have months of work stored in the memos, and have about 90 numbers that werent saved on the simcard, i took the simcard out and the memory card, i have done pretty much everything i wus ever told to do as far as fixing it, i plan on buying an bold 9700 but i still must retrieve my contacts and memos can anyone give me any tips as far as fixing it, or atleast tell me how to get my memos and contacts off, thanks for your time and consideration.
View 7 Replies View RelatedYesterday I updated my phone to CyanogenMod(CM)13.0 which went fine. However when I rebooted the phone a popup came up the entire time telling me that google play services stopped working. In an attempt to fix it, I accidently removed google play services, causing a bunch of trouble at the moment.
I went to the CM Wiki and first I downloaded the "nano" variant of the GAPPS, trying to fix everything in the end. I put the file on my phone and tried to install it via recovery. This message came up however.Insufficnt storage space available in system partition. You may want to use a smaller GAPPS package or consider removing some apps using GAPPS-config ( bla bla) Error code 70. As far as I can see, it is able to mount /system and /data, but the partition does not seem to have enough space left, at least so it says.
After that I tried the same with the "pico" variant, which also gave the same result. Pretty strange for a package that small.So after taking a backup of important files I tried to wipe data/factory reset (was going to reinstall everything), to which I got an error "data wipe failed", which is correct since I can still boot in CM13 after that. So I'm a bit in trouble here. I cannot seem to wipe my phone entirely, nor am I able to reinstall GAPPS due to this error 70. Could this be a permissions problem somehow? Things I have done so far to check what the problem could be:
- I've checked the space left on the /system partition which is 501 MB. Should be enough I guess?
- I've checked the /system partition for errors via adb shell while the phone was in recovery mode, which came out clean.
Lightflow making the phone screen turn on randomly when sitting on a table? The colors for the notifications are correct, but becausue of the screen coming on alot randomly this is going to kill the battery life. I even enabled a setting to reduce this in light flow but nothing works. How to have lightflow working correctly?
View 8 Replies View RelatedI have a Curve 3G 9300 and today it froze and then went into the black reboot screen with the white bar going across showing loading progress. I didnt ask it to do this nor did I press anything as both times it was in its pouch playing music.
View 2 Replies View RelatedMy phone randomly rebooted about five times in the last few weeks. At least twice while listening to device music through Amazon music player.
View 13 Replies View RelatedThis has been very random. did it in my pocket, out of my pocket, on the charger and off. The phone is not overly hot. warm only when on the charger or in my pocket. This morning I have rebooted it several times. (I hold the power button for 10 seconds.)
View 2 Replies View RelatedJust earlier today my phone randomly rebooted (not all that uncommon unfortunately) but it ended up at a garbled screen as shown in the attached picture. A battery pull and reboot fixed the graphics glitch but I've also had one other graphics glitch when I was using my gps. The bottom 3/4 of an inch of the screen had a static image of the top portion of the screen. Other than "overlaying" that image it didn't affect the behavoir of the phone any, I could bring up the menu and select options in it but they were hidden behind the glitch. It did it again. This time it's just the bottom half of the screen and the phone "works" but is extremely laggy.
View 4 Replies View RelatedThere is a similar post entitled " PC recognizes Nexus but then I can't access my storage". None of the solutions offered seem to apply to my situation. This is a new problem for me as I have previously had no difficulty connecting to my PC transferring files, especially music files.
Windows 7 on PC, Android 6 on Nexus 5. I am not rooted.
One solution mentioned in the other similar post said to go to:
Settings|Storage and USB|3dots| Menu in the Upper R Corner| USB Computer Connection is MTP
When I click on the 3 dots all I see is the option for "help and feedback". Not useful.
Accessing the device manager on the PC shows the Nexus 5 under portable devices. Clicking to update drivers shows the drivers are up to date.
Looking at "Devices and Printers" shows 2 Nexus 5 icons. One is described as a portable media player. Clicking on it brings up the blank page. The other icon under properties lists the device as a phone. Double clicking on the icon brings up Bluetooth operations which shows PC<->BT<->Nexus 5. I currently have Bluetooth turned off on the Nexus 5.
I'm not sure what app is causing. I expect it when I'm backing out of Facebook or something but this but sometimes when I'm backing out of Gmail and right now just happened when I was making a phone call. Any way to find out which app is causing this?
View 24 Replies View RelatedSo just got my 6p yesterday but it seems as though ambient display although turned on is not working ND when I answer a phone call my screen stays black during the call and won't wake up.
So apparently it's because the tempered glass screen protector is covering the proximity sensor. I still have to actually test that theory out once I get a new protector but from doing some digging that most def it. Just a heads up I used the one by super shieldz so don't buy that one until they make a cut out for the sensor.
In the last 3-4 weeks, I've seen my Nexus 5 rebooting here and there randomly. He's not stock into a boot loop, he works just fine and then 'pop', I can see it rebooting without reasons.
I'm running stock 5.1.1, kernel 3.4.0-gbebb36b, Build number LMY48B. The phone is rooted manually, no automatic trick.
Does randomly reboots means something? Is there a way to see what happens/what happened like an event viewer in Windows?
So for the past week I've had the strange problem of N5 randomly shutting down, but ONLY when my screen is on. if I'm listening to music, I can listen until my battery runs out, but if I'm looking up stuff or playing a game, it'll shut down after a few minutes at varying lengths of time(It's a sudden shutdown so my screen just goes black when I'm in the middle of something).
After it has shut itself down and I try to turn it on then it'll turn off after the boot animation and before the lock screen shows. If I want it back on then I can get it start up again if I have it connected to a charger until the lockscreen shows and it'll act like normal(besides the whole random shutdowns)after I unplug it. I also don't have this problem when it's plugged in.
I've tried changing roms, kernels, and flashing the stock firmware with no success. I'm currently on XTraSmooth(Lollipop) with ElementalX 4.04 kernel.
Like I'll be using it and then it will just shut off and then when I boot it back up, it says the battery is very low or it shuts off during bootup! It would shut off at like 80% or other random percents! It has been doing this for a month, but it's gotten much worse! I can't even have it unplugged for 10 or 15 minutes without it doing this! Also the 5.1 update didn't even work.
View 13 Replies View RelatedI'm on the latest build that came out today. Not sure if it's something I did, or if this is normal for when you are rooted, bootloader unlocked, etc
View 10 Replies View RelatedMy Nexus 6P will not do anything but charge when it's plugged up to my PC. I am using the systemless root and Franco kernel r7. Other than that, it's stock. What happens when I plug my phone into my PC is the battery icon changes to charging, and that's it. The PC does not recognize the phone is plugged in, and there are no unknown USB devices in device manager. I also do not get a USB notification on my phone.
More details:
- I have done the complete drive install VIA the nexus root toolkit (both initial setup before this problem, then again when the problem surfaced)
- USB debugging is enabled
- I swapped cables about 3 times, no change
- Tried different USB ports on PC and laptop and even ports directly connected to the motherboard. no change.
- Tried on my laptop (Windows 10) and it does the same thing as the PC (Windows 10).
- USB settings are set to MTP, although if I change it, it seems to get stuck on charging. I have to tap MTP about 3-5 times in order for it to say it's in MTP mode again.
- Running the command adb devices in command prompt does not show anything connected.
Other than this weird issue, I have not had any problems with my phone. I also have another USB-C cable on the way, but it seems unlikely that would be the issue.
I got my brand new 6p last week on friday and am in love with it, currently testing out the battery to see how much juice I can get out of it in a normal working day. I have however noted that when i browse using 4g on chrome the phone gets warm, not too hot to hold but get noticeably warm, the top half between the camera and the fingerprint sensor and the front screen as well. I have the phone in the 'adopted' case that i ordered with it from the Google store which might be bad for heat dissipation but still wondering if other people have had their phones get warm when being used?
View 3 Replies View RelatedHow to use the new Emojis which "came out" with 6.0.1? checked Google keyboard but it contained only old emoticons.whats the procedure for enabling the latest emojis
View 3 Replies View RelatedI flashed CM when it first arrived and encrypted my phone. How do I unencrypt it again?
View 10 Replies View RelatedI got the 45.5mb ota ,restart after update but nothing changed in phone about.. same old build number and security patch...see attachment.
Attached Thumbnails
So I set up my phone with all my apps, and turned it off and now it won't boot up. How to get it to work?
View 8 Replies View RelatedHow can I get my voicemails to show up there? Does it work with Verizon? The tab only appeared after I installed Google Voice and set it up as my voicemail in the phone app settings...
It doesn't matter to me if I have to use Google Voice or Verizon's native voicemail, just seems like a cool feature.
On a related note, Google Voice regularly alerts me of Voicemails hours or even days after I get them...is that normal?
I didn't drop it or get it wet or anything, it was just sitting on my desk and it randomly shut off. I've tried shutting it off and on again but it just comes back to the google screen where it sits frozen for about 30ish+ minutes before it shuts off, I can't turn it off otherwise, if I try turning it off it just turns itself back on so I can't shut it off. Is there anything I can do to save my data (or even better, fix my phone) or am I screwed? I also don't have USB Debugging turned on so I can't get stuff back that way either. My phone is not rooted and running stock android 5.1.? (Don't remember my exact version but I think I've missed the last 2 minor updates)....
View 10 Replies View RelatedI've had my Nexus 6 for 3+ months and have had no problems until today when my phone would randomly reboot. Sometime it would come back on quickly and other times it would go through the long process of optimizing apps. The phone has had 2 OTA software updates since I purchased it so I decided to do a factory data reset.
I have not experienced any random reboots since the factory data reset but now I am unable to connect to WiFi. When I click on the WiFi in the quick setting menu, the phone is unable to identify any available networks. When I click on More Settings, the screen says Turning WiFi on but nothing ever happens.
1.My phone gets restarted randomly while using chrome or playing games.
2. Recent application key is not working, I have restarted my phone like 100 times, I do not want to factory reset my phone. This is so frustrating.
3. While playing video through FB, Youtube music starts playing and I am not able to stop it. I have to restart ir for normal operarion
The phone apparently does not support HDMI over USB-C and I need to find a way to mirror my screen via HDMI.
My car has an HDMI input to the head unit and it was just recently found to have a bypass in it so that the HDMI will work while driving. I do not want to watch videos while driving but I do want Google maps/waze to be shown on my head unit screen as the car's standard navi is terrible.
I have tried using Chromecast but the Chromecast does not work unless the car is connected to WiFi. Using my phone as a hotspot was a workaround up until an update to the Chromecast was said to cause it to crash. So this option is out.
What I would like to do ideally is buy an HDMI miracast dongle to mirror the screen as it uses WiFi direct. If I go into settings>WiFi>menu>advanced I see the WiFi direct menu but it looks incomplete.
I did some searching and saw that there was a way to edit the build.prop on the nexus 6 to allow for miracast.
