Huawei Nexus 6P :: Device Is Corrupted - No Command Error
Feb 4, 2016
Yesterday i got notification with new update that i have to setup, so after charging my phone at night i started the update this morning then boom I can't start my nexus anymore...
First I got message ( your device is corrupted. it can't be trusted and may not work properly ) although i didn't make any custom rom nor recovery nor unlock my boot loader
Second I got No command error , then boot loop all the way .....
After some google i tried to press power + volume up and down to enter recovery ( the stock recovery ). I did wipe cash + wipe data factory hoping it solve the problem but seems no way
Also i read Heisenberg's How-To Guide For Beginners many times and downloaded last Stock img but can't install it via fastboot cause i didn't activate usb debugging before nor “Enable OEM Unlock” so i can't even unlock my nexus.
Recovery version :
angler
6.0.1
MMB29P
And this is getvar all :
(bootloader) version:0.01
(bootloader) unlocked:no
(bootloader) hardware-revision:ANGLER-VN2
(bootloader) version-baseband:angler-02.50
(bootloader) version-bootloader:angler-02.45
(bootloader) display-panel:
[Code] ....
View 10 Replies
ADVERTISEMENT
Feb 1, 2016
I got my Nexus 6P the other day and immediately flashed CM13 on it, and came across a couple of problems. I used the following guide, step by step: (Can't post links. but it's on Devs-Lab)
So, first off, after finishing everything (Unlocking the bootloader, Rooting & Installing Recovery and finally installing CM13) I came across a couple of problems. Firstly, my phone refused to start as it couldn't be decrypted even though I never encrypted it or set a password for the encryption (which it asked me for, to decrypt) so I tried to factory reset the phone. Didn't work, formated the phone which did work and now it launches / works with no issues. However, every time I start the phone it tells me that the device is corrupted and can't be trusted.
View 4 Replies
View Related
Oct 30, 2015
Title says it all. No IMEI, no service. Flashed both factory images to no avail.
View 4 Replies
View Related
Nov 3, 2015
I noticed there were 2 newer images on the Google developers page and thought I would flash the latest and greatest (MDB08M) since it wasn't coming down OTA. I enabled Developer Options and set USB debugging and OEM unlock, rebooted to bootloader, did a fastboot oem unlock, rebooted then back to bootloader and ran the flash-all.bat from the new image, rebooted and all was well. I re-enabled USB debugging and went back to bootloader to re-lock the bootloader and am getting an error:
...
FAILED (remote: unknown command)
finished. total time: 0.016s
Results of fastboot getvar version-main are blank:
version-main:
finished. total time: -0.000s
I rolled back to MDB08K but it made no difference. I then tried rolling back to MDA89D and letting it pull MDB08K OTA but that too made no difference.
View 5 Replies
View Related
Nov 10, 2015
So last night my phone randomly froze and rebooted into the command page with the little android guy saying no command. So I had to reboot system and all is well.
View 3 Replies
View Related
Nov 6, 2015
So I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies
View Related
Nov 8, 2015
I went into recovery and rebooted, still get the "no command" screen. Factory reset didn't fix it either.
I got into fastboot and ran the flash-all from an image I got from Google and got "'fastboot' is not recognized as an internal or external command, operable program or batch file."
View 1 Replies
View Related
Dec 4, 2015
I want to reflash my Nexus 6P with a custom version of the AOSP. I can't access the device using "adb devices".
Code:
adb devices
List of devices attached
???????????? no permissions
I guess I need to add an entry for Nexus 6P (and also for 5X) to the /etc/udev/rules.d/51-android.rules file. For this, I need the idProduct code for these two phones.
Code:
# adb protocol on hammerhead (Nexus 5)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee1", MODE="0600", OWNER="paul"
Where can I find this code?
View 2 Replies
View Related
Dec 19, 2015
I recently purchased a Nexus 6P, which I think is an absolutely brilliant device. Despite this I would like to mess around with it behind the scenes (root, different ROMs etc). Firstly I'd like to edit build.prop.As such as I have installed the Android SDK, installed the relevant things needed such as the USB drivers and platform tools. I've enabled USB debugging in the Developer Settings and ADB works fine when the phone is in normal mode. Booting in to fastboot mode also works.
Unfortunately, when I enter Recovery mode the phone disappears from ADB devices and from Device Manager on Windows. Strangely selecting the sideload option means the device shows up in both places, but I can't use the commands I want.
I've tried various official drivers, unofficial drivers and even edited the official drivers to add my hardware ID with no luck. I'm somewhat new to modern Android so I may be missing something obvious.
View 4 Replies
View Related
Nov 16, 2015
How do you change the font on this device? Through the usual font app on the play store ?
View 10 Replies
View Related
Feb 21, 2016
Recently, a friend lost a phone. Apparently, it was turned off after being found. When going to Android Device Manager, it only indicated that it couldn't locate the phone. I thought that it would show its last known location, but it did not. Shouldn't it?
View 1 Replies
View Related
Feb 14, 2016
Snapchat is not working right after I tried to use snaprefs to upload a pic, I cleared app data to get snaprefs working! I did softreboot a few times, then when I tried logging in snapchat I wasn't able to.. I got a pop up saying
"Oh no, your login temporarily failed, So please try again later. If your login Continues to fail, please visit (I can't Add links as I'm a new member)....
Image : [URL] ......
Later I installed rootcloak and tried to hide root acess to Snapchat, even then I get the same message! How to get snapchat working without unrooting ?
View 4 Replies
View Related
Jan 16, 2016
I'm going to preface this with the nagging feeling I may be completely off-base with how I think OTA updates while rooted/custom recovery works, but here goes anyway.
I got my 6P at launch, and immediately went and rooted it. Everything's been fine except for the constant notification that there's an OTA update available. I've got TWRP right now, so just attempting to reboot through the system's standard update installation doesn't do anything.
I thought I'd just grab the manual updates and flash them from the web. I was positive I grabbed the right Before-to-After .zip, but trying to flash it through TWRP just results in it failing. Nothing breaks on the device, it just boots and runs normally, but I'd still like to get these updates installed.
What I'm currently thinking is that instead of chasing down build number update zips, I'd just use the downloaded one specifically and attempt to install it via TWRP. This poses the question:
1. Where does Marshmallow download OTA updates to when it attempts to flash them when you reboot?
and then the follow-ups:
2. Can I even do this via TWRP, or is there a different process that I should use that I've somehow totally missed?
3. Post-OTA update, will I need to re-root? (Not a big deal, just wanting to set my expectations)
View 1 Replies
View Related
Nov 23, 2015
I'm setting up my Nexus 6P and see this option that says I can transfer stuff from my old android to my new one but when I open Google App and go to settings I cannot find anything called "search for nearby device"...where is it? Also, is this feature in just Lollipop and higher?
View 4 Replies
View Related
Dec 14, 2015
I won a Nexus 6P at work but I have a device locked message when trying to enable USB debugging. Seems I have a demo handset but how I remove it?
View 3 Replies
View Related
Feb 4, 2016
Fastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
View 1 Replies
View Related
Jan 21, 2016
I am getting things set up to root my Nexus 6p using a Macbook Pro. I have Android Studio installed & I see the platform-tools folder like the tutorial says. But my phone isn't showing up as a device on my Macbook nor is the terminal command "adb devices" showing it. Need to successfully rooted their Nexus 6p using a Macbook Pro?
View 10 Replies
View Related
Nov 21, 2015
There was an app in the playstore that enabled doze as soon as the screen was turned off on the device.
View 1 Replies
View Related
Dec 13, 2015
Today I flashed CM13 on my Nexus6P and it all worked fine until I tried starting the camera, which gave me the error mentioned in the title. Restarting the phone and erasng the app's data didn't work either.Also everytime I boot my phone it shows me an "your device is corrupted" screen (not the boot loader unlocked screen) and when the phone starts it shows me something like "there's a problem with your phone, it might not work properly".Is this my fault or is it a CM13 issue and how do I fix it? (I'm using today's official CM13 build with Open Gapps Mini arm64 for android 6.0)
View 4 Replies
View Related
Dec 29, 2015
Im using twrp 2.8.7.2 the latest one
Im on stock 6.0.1
I can flas cm13 but when i flash gapps(not matter which one nano, pico ext..) i get error 6 or 22, what is wrong???
View 8 Replies
View Related
Jan 31, 2016
I was running Pure Nexus and decided I would install Chroma today. I made a full backup in recovery with TWRP. I then installed Chroma and Gapps. Upon booting it told me I needed to update my vendor image. I couldn't remember how I did that the last time so I decided to just go back to my Pure Nexus and restore it. When I tried I got this error: "E: Cannot restore System -- mounted read only". How to fix this so I can restore that backup? I've searched and didn't find a solution. Also, couldn't find exactly how to flash the update vendor.img. Should have written all this down when I did it back in November.
View 6 Replies
View Related
Nov 4, 2015
I've run into a rather odd issue with fastboot. It seems that any command entered comes back with the following:ERROR: Couldn't create a device interface iterator: (e00002bd)
There is no issue with adb, and I have tried re-installing both platform-tools and the entire SDK, but no luck. I don't run into this problem in Windows either,On further analysis, it looks like it has something to do with OSX. I've disable SIP and gatekeeper, and the issue still persists, so it looks like I'll just have to use windows for fastboot!
View 10 Replies
View Related
Oct 31, 2015
I have unlocked bootloader, flash modified boot.img and recovery but when I boot the device I get 'Your device is corrupt and may not work properly' I then get stuck on the google boot screen. When I go into TWRP recovery it cannot mount anything so I cannot even perform a factory reset.
View 4 Replies
View Related
Jan 29, 2016
So I'm running Camera Zoom FX on a stock, debloated, rooted rom. It takes pics fine. However when I try to switch to video mode, it says "video switch not supported on this device"
Is there a fix for this? If not, whats another good camera app tha does actually support video.
View 1 Replies
View Related
Nov 7, 2015
Can I disable the cell signal automatically on the unrooted nexus 6P?
I know I can pop it in airplane mode and then turn back on bluetooth & wifi but I want to automate this process so that when I'm at work it will toggle the cell radio off.
View 3 Replies
View Related
Jan 20, 2016
Having a problem with stock Messenger. I can send pics but not videos. I took a short (5s) video on my 6P and tried to send it to my son. He's got a 5X. I get an error saying "message not sent: couldn't resize video..".
He's running stock Marshmallow MMB29T, and I'm rooted (same build) and running PureNexus 6.0.1-20160109 which is the latest version. He can send videos just fine and I can receive. Other than the sending of videos, all is running good.
View 4 Replies
View Related
Feb 19, 2016
I'm rooted using Franco kernel.
When I try and reboot through the Xposed Framework I get the following error message everytime:
sush:<stdin>[5]: /data/user/0/
de.robv.android/xposed.installer/cache/busybox-
xposed:not found
Reboot failed: Please use the device's normal reboot function.
I have busbox installed. Not sure what else I'm doing wrong?
View 1 Replies
View Related
Dec 11, 2015
First time rooter here, getting wakelock error message "failed to perform this task at the moment, please try again later"
I've tried removing it with system app remover and reinstalling it, still no dice.
View 1 Replies
View Related
Dec 11, 2015
I'm currently on pure nexus/ then restored stock and titanium backup is displaying an insufficient storage error when trying to back up an app. Also, I can't download anything from Firefox or chrome.I've reflashed the ROM and it didn't solve my issues. What can I do to fix this?
View 3 Replies
View Related
Sep 8, 2015
I am trying installing official xposed xposed-v73-sdk22-arm.zip on Nexus 5 LMY48I but after install from recovery i have space error on device.
View 1 Replies
View Related
Aug 6, 2015
A friend gave me his nexus 5 because it have a problem, one day the phone was stuck on boot screen (the flying balls of lollipop) and to add difficulty (can't be easy right?) windows doesn't recognize the phone but it recognize my nexus 5 with the same cable on the same usb port....
I get a "Device Descriptor Request Failed"(the usb port on the nexus seems to be ok) but my nexus get none ... Is it a hardware issue ? I heard that there is issues with nexus 5's motherboard...
I can enter the fastboot and recovery but after a wipe, still stuck..... Not rooted and booloader locked....
View 3 Replies
View Related
