I have unlocked bootloader, flash modified boot.img and recovery but when I boot the device I get 'Your device is corrupt and may not work properly' I then get stuck on the google boot screen. When I go into TWRP recovery it cannot mount anything so I cannot even perform a factory reset.
View 4 Replies128 GB Frost Nexus 6P, just got it today in the mail and decided to restart the phone after a day of installing all my apps and re downloading all my music, and now its stuck in the colorful bootloop and has been for over 2 hours. Not Rooted Not Unlocked, how to get it out of this.
View 10 Replies View RelatedSo I made a backup as I wanted to dirty flash PN again to change kernel. My phone bootlooped after I flashed PN and franco kernel. So i decided to restore my working backup..still boot looping... WHY?! this phone never successfully restores backups in my experience.
View 6 Replies View RelatedI'm on latest M version, latest TWRP, systemless root and Despair kernel 3.1.
When I first installed TWRP it couldn't decrypt partitions, so I had to install a kernel that disables force encrypt and factory reset the phone. So I ended up with un-encrypted partitions.
Now, TWRP supports decryption so I thought to encrypt the partitions. I went to Security -> Encrypt phone. This has been hanging on Android animation logo for 2.5hrs and no indication when it will finish.
My Nexus 5 is stuck at the flying dots after Lollipop OTA update. Already try factory reset. Cant connect to my Lap (running Windows 10) because it says in the device manager: Unknown USB Device (Device Descriptor Request Failed), so I cant manually update the driver and cant access it with ADB and Fastboot tool. The device has no USB debugging enabled. In the old computer where I used to connect the device and has the drivers installed says the same thing in device manager as my new laptop.
View 10 Replies View RelatedI had a new nexus 5 running on android 6.0 ,I was planning on rooting my phone , had the oem bootloader unlocked - the twrp installed , however after flashing the elementalx and beta supersu , my phone was in a bootloop for 4 hours. I did everything as told in the tutorial video for rooting and now i think that by flashing the nexus 5 stock rom it might be useful in recovering my phone... How to flash stock rom on nexus... when I tried getting into the recovery mode it was still in twrp ...
View 4 Replies View RelatedLast night, I left my phone on charge. It was working normally and the software was functional etc. However, once I woke up, the phone was constantly restarting itself, and wouldn't load past the boot animation. I tried to load up fastboot to enter the TWRP recovery, however, the phone froze on the load screen. I should also add that my custom boot animation was replaced by the CyanogenMod mascot.
I tried to use WugFresh's NRT to flash a factory image of Android 6, however, the command terminal indicated that each process had failed. This did not restore the phone to its original condition.
I should also point out that I have been running a CM 12.1 nightly, which has been very stable and I have been using this nightly, without major problems (bar the infrequent system UI crashes) for a couple of months. It is obviously rooted and I have a Nandroid backup, which I can't access for aforementioned reasons.
A friend gave me his nexus 5 because it have a problem, one day the phone was stuck on boot screen (the flying balls of lollipop) and to add difficulty (can't be easy right?) windows doesn't recognize the phone but it recognize my nexus 5 with the same cable on the same usb port....
I get a "Device Descriptor Request Failed"(the usb port on the nexus seems to be ok) but my nexus get none ... Is it a hardware issue ? I heard that there is issues with nexus 5's motherboard...
I can enter the fastboot and recovery but after a wipe, still stuck..... Not rooted and booloader locked....
How to fix phone that won't charge properly... I know this is a very common complaint, any good way to fix it？
View 3 Replies View RelatedSo it logs me in, but it loads infinitely and nothing ends up loading in entirely. I've tried uninstalling it, deleting the data/cache but no luck
View 3 Replies View RelatedMy front camera is blurry, can't focus properly.
View 10 Replies View RelatedHaving issue with TWRP not erasing/flashing roms properly..I have a dark theme installed Domination Theme with the extras (MMS, contacts, etc) and i did a very clean install, normally I go Wipe > Advanced and select all partitions and format it.After flashing another rom, I noticed some parts are still dark themed like the MMS, Google search bar, contacts, etc
View 3 Replies View RelatedI've been running Android M preview (3?) for a while on my Nexus 6.2 months ago my USB-connector of the phone broke and only because I also have a wireless charger I can continue to use my phone.Just now I tried a headphone and noticed that viper4android wasn't working, which it did a while ago.I still had the file viper_aio_fixes.zip in my download folder I used to get it going a long time ago. [URL]..
I booted into recovery, flashed that zip and did a reboot.Now it is stuck at the black screen with only the text "Google" and a padlock.I am able to boot into fastboot where I can go in the several modes including recovery mode (Team Win Recovery Project v2.8.5.0). I don't have any possibility to connect it to my computer using an USB. The device does still have warranty, but I can't miss my phone.
I recently got my 6P and immediately proceeded to unlock the bootloader and flash TWRP to start loading custom roms. I decided to start use Pure Nexus with it's accompanying gapps package but when I go to reboot the device, I am stuck at the circles boot animation.
I decide to try CM13 nightlies and the same problem occurs. After searching online for some time, I realize I needed to flash a SuperSU file from recovery that flashes a custom boot.img. I flash Version 2.66 and restart the device. After 5+ minutes on the boot screen, I decided I am stuck still. What do I need to do, I am unable to boot the device.
So I have verizon and I'm using a nexus 6p. My phone died and I charged it and booted it back up.Problem was is I forgot my password. So since I'm rooted i went into twrp and tried my password there. it worked there but not on regular boot up. So i went into wipe and wiped everything. now when i go to reboot my phone it is stuck on the google logo.
View 1 Replies View RelatedI've followed instructions in from this thread [URL] .... and flashed the supersu from the recovery without reading not to flash. Now I'm stuck at the google splash screen. How to recover from this?
View 3 Replies View RelatedStuck @ "Downloading update..." screen when trying first time connection/start up.
"Downloading update... Waiting for download
This update is 43.8 MB. To continue the download, select a Wi-Fi network.
Via Wi-Fi only until Nov 26
Update size: 43.8MB".
Back button on "Downloading update..." screen doesn't respond.
6P is connected to Verizon mobile hotspot wifi. Verizon wifi speed more than 6Mbps, ping 60 ms (tested from Dolphin browser without data compression)
The 6P Wi-Fi list indicates
Status- Connected
Signal strength- Excellant
Link speed- 72Mbps
Frequency- 2.4 GHz
Security- WPA2 PSK
The 6P phone "Update phone" screen proves internet access by connecting to Google terms of service and privacy policy web pages and allowing web page links to work. Even able to navigate to the Google search/sign in page from the 6P "Update phone" screen, but can't sign in because no keyboard pop up.
Verified the wifi network works for all my other devices. Tried forgetting/rescaning wifi network many times, tried with and without the Google Fi sim card many times, tried wiping cache, factory reset, and recovery modes many times. Tried leaving the 6P connected to the Verizon mobile hotspot for more than 15 hours. Tried the Fi LTE.
After more than 25 restart/initialization attempts, only the previously mentioned web pages display on the 6P "Update phone" screen, on wifi or LTE.
Damnit. Something went wrong and I don't know how to get out of it.
I used Nexus Root Toolkit 2.0.7. Bootloader Unlock went just fine. Root went wrong (I think). It just sits there at the white Google logo. It never goes to the animated loading portion of boot up.
So, I stopped the process. Then went to select Flash Stock + Unroot to hopefully start over. It still stays at the white Google logo. Instructions say it could take up to 20 minutes, but I waited for about 30 and nothing happened.
So I entered Recovery. Formatted/Cleared all data and started fresh with the unlocked boot loader. I was able to flash TWRP and actually flash a custom ROM. It loaded, but the phone boot looped when I tried to flash a custom Kernel.
Fine. I went to restore a backup I made before flashing the Kernel and it boot looped. Restoring the backup did nothing and I couldn't load anything.
Loaded up Nexus Root Toolkit again, tried to root and it just stays on the white Google logo. Tried Flash Stock + Unroot and it still sits at the Google logo.
WTF. I've been doing this for a long ass time now.
So I tried to use the Nexus Root Toolkit to sideload the OTA, but now when I try to boot my phone it just shows the white google screen and doesn't do anything. I can use ADB and fastboot and get into the bootloader but I can't flash the factory image because I never checked the "Allow OEM Unlock" tick since I didn't plan on unlocking the bootloader.
View 10 Replies View RelatedSometimes it will get stuck in landscape. I'll have to go from portrait back to landscape to get it to rotate back to portrait
To narrow it down if I lock the phone in landscape the unlock it via fingerprint sensor it happens
My best earbuds do not work properly w. this device.These are the v-Moda vibe duo and they work really well in any device i;ve ever plugged them into.i have 3 of these. I use my phone a real lot for music and the earbuds that come w. the Nuron are cheesy sounding and cheaply made.i thought this device would work fine w. standard earbuds.I;ve tried diff settings.the sound is muted and garbled until I press the speaker button and keep it held and then it sounds great obviously this isnt an option.what gives? does this phone require some proprietary earbuds? if so, that is really lame IMO.
View 4 Replies View RelatedI've tried dirty flashing, factory reset, system wipe, and a full reflash of Googles stock images. Still when I try and boot into CM13, I get stuck at the Google logo.
View 10 Replies View RelatedSo I tried to root my 6P with the Nexus Root toolkit , first I unlocked the bootloader, that went well . After that I tried to root it but my build number wasn't there (MDB08L) So I researched if that would be a problem and a couple of people said they followed the same instructions as with the MDB08K build and it worked just fine on theirs so I proceeded.
I selected the "any build" from the options on the toolkit and it seemed to be going well, I followed the instructions , flashed the files on twrp and from there I rebooted and it got stuck on a bootloop... :/ so then I tried to use the toolkit to fix the bootloop and selected the MDB08K and after it ran and finished it isn't exactly bootlooping but it is now stuck on the black Google logo and does nothing ...
I got my Nexus 6P the other day and immediately flashed CM13 on it, and came across a couple of problems. I used the following guide, step by step: (Can't post links. but it's on Devs-Lab)
So, first off, after finishing everything (Unlocking the bootloader, Rooting & Installing Recovery and finally installing CM13) I came across a couple of problems. Firstly, my phone refused to start as it couldn't be decrypted even though I never encrypted it or set a password for the encryption (which it asked me for, to decrypt) so I tried to factory reset the phone. Didn't work, formated the phone which did work and now it launches / works with no issues. However, every time I start the phone it tells me that the device is corrupted and can't be trusted.
I want to reflash my Nexus 6P with a custom version of the AOSP. I can't access the device using "adb devices".
Code:
adb devices
List of devices attached
???????????? no permissions
I guess I need to add an entry for Nexus 6P (and also for 5X) to the /etc/udev/rules.d/51-android.rules file. For this, I need the idProduct code for these two phones.
Code:
# adb protocol on hammerhead (Nexus 5)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee1", MODE="0600", OWNER="paul"
Where can I find this code?
I tried to install Cataclysm ROM, and then it went into some sort of installer, after that I tried to reboot, but TWRP said it didn't have any OS?? So i tried to boot it up anyway? but nothing, just stuck on Google Logo. After that I tried to boot into TRWP agian. But then TWRP says "Mount Decrypt Data" and then i have to enter a password?? but i removed my pattern lock before flashing.
Because i made a Nandroid and i read i had to remove the password before making a backup. But then i just press cancel. Then it says " Unmodified System Partition" "Swipe to Allow Modifications" and i do that. Now i have nothing on my SD card?? Then i thought i could flash stock through Fastboot/ADB, but now it won't see my device in ADB? I have updated my drivers, both by Google and Intel But nothing? so i cant return to stock and can't boot up.
Some how i got i to reboot by an ADB command and then i could flash factory image and return to stock.
So I flashed the latest firmware, after being unlocked, then rent back to bootloader, flashed recovery, went to recovery and installed file. Then restarted...now stuck in boot loop. It booted before I went to flash recovery in the new firmware just fine.
Do you need to flash something else when you flash recovery?
it says device is corrupt when I restart, but I was under the impression that screen comes up when bootloader is unlocked, so not sure if it means anything...
I have a bluesleep wakelock stuck on 100%. It won't allow any deep sleep, always awake. It will stop only when I turn off Bluetooth all together. Bluetooth and wifi scanning are both off. I have a watch, even turning it off won't work. Also froze Android wear apps. No change.... Maybe something to do with missing kernel binaries?
Here are some better battery stats. Thurs is obviously after a fresh reboot, makes no difference really.
Attached Thumbnails
Currently flashing back to stock with the steps given by Heisenberg's step by step guide, number 11, how to flash the factory image.
At the command fastboot flash system C:anglerimagessystem.img and it has sat here for over an hour and a half now with the output of writing 'system'. If I'm not mistaken, my phone is basically bricked at this point, as all I have written to the phone right now is recovery and bootloader really, and since I flashed the stock bootloader that means it is relocked.
Is there any way I can unlock it from here and then flash TWRP again, and then restore one of my backups of my 6P to at least get it working again?
I recently purchased a Nexus 6P, which I think is an absolutely brilliant device. Despite this I would like to mess around with it behind the scenes (root, different ROMs etc). Firstly I'd like to edit build.prop.As such as I have installed the Android SDK, installed the relevant things needed such as the USB drivers and platform tools. I've enabled USB debugging in the Developer Settings and ADB works fine when the phone is in normal mode. Booting in to fastboot mode also works.
Unfortunately, when I enter Recovery mode the phone disappears from ADB devices and from Device Manager on Windows. Strangely selecting the sideload option means the device shows up in both places, but I can't use the commands I want.
I've tried various official drivers, unofficial drivers and even edited the official drivers to add my hardware ID with no luck. I'm somewhat new to modern Android so I may be missing something obvious.
How do you change the font on this device? Through the usual font app on the play store ?
View 10 Replies View Related