Huawei Nexus 6P :: Device Is Corrupted
Feb 1, 2016
I got my Nexus 6P the other day and immediately flashed CM13 on it, and came across a couple of problems. I used the following guide, step by step: (Can't post links. but it's on Devs-Lab)
So, first off, after finishing everything (Unlocking the bootloader, Rooting & Installing Recovery and finally installing CM13) I came across a couple of problems. Firstly, my phone refused to start as it couldn't be decrypted even though I never encrypted it or set a password for the encryption (which it asked me for, to decrypt) so I tried to factory reset the phone. Didn't work, formated the phone which did work and now it launches / works with no issues. However, every time I start the phone it tells me that the device is corrupted and can't be trusted.
View 4 Replies
ADVERTISEMENT
Feb 4, 2016
Yesterday i got notification with new update that i have to setup, so after charging my phone at night i started the update this morning then boom I can't start my nexus anymore...
First I got message ( your device is corrupted. it can't be trusted and may not work properly ) although i didn't make any custom rom nor recovery nor unlock my boot loader
Second I got No command error , then boot loop all the way .....
After some google i tried to press power + volume up and down to enter recovery ( the stock recovery ). I did wipe cash + wipe data factory hoping it solve the problem but seems no way
Also i read Heisenberg's How-To Guide For Beginners many times and downloaded last Stock img but can't install it via fastboot cause i didn't activate usb debugging before nor “Enable OEM Unlock” so i can't even unlock my nexus.
Recovery version :
angler
6.0.1
MMB29P
And this is getvar all :
(bootloader) version:0.01
(bootloader) unlocked:no
(bootloader) hardware-revision:ANGLER-VN2
(bootloader) version-baseband:angler-02.50
(bootloader) version-bootloader:angler-02.45
(bootloader) display-panel:
[Code] ....
View 10 Replies
View Related
Oct 30, 2015
Title says it all. No IMEI, no service. Flashed both factory images to no avail.
View 4 Replies
View Related
Nov 6, 2015
So I went ahead and started to root my Nexus 6P. I installed the systemless modified boot.img and TWRP, then I sideloaded the systemless SuperSU in TWRP. I am encrypted and TWRP can decrypt still, however when I try to boot the phone, I get the Decryption unsuccessful message and it wants me to reset the phone. I hit reset, it factory resets in TWRP, and it just comes to the same screen upon boot.
View 3 Replies
View Related
Dec 4, 2015
I want to reflash my Nexus 6P with a custom version of the AOSP. I can't access the device using "adb devices".
Code:
adb devices
List of devices attached
???????????? no permissions
I guess I need to add an entry for Nexus 6P (and also for 5X) to the /etc/udev/rules.d/51-android.rules file. For this, I need the idProduct code for these two phones.
Code:
# adb protocol on hammerhead (Nexus 5)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee1", MODE="0600", OWNER="paul"
Where can I find this code?
View 2 Replies
View Related
Dec 19, 2015
I recently purchased a Nexus 6P, which I think is an absolutely brilliant device. Despite this I would like to mess around with it behind the scenes (root, different ROMs etc). Firstly I'd like to edit build.prop.As such as I have installed the Android SDK, installed the relevant things needed such as the USB drivers and platform tools. I've enabled USB debugging in the Developer Settings and ADB works fine when the phone is in normal mode. Booting in to fastboot mode also works.
Unfortunately, when I enter Recovery mode the phone disappears from ADB devices and from Device Manager on Windows. Strangely selecting the sideload option means the device shows up in both places, but I can't use the commands I want.
I've tried various official drivers, unofficial drivers and even edited the official drivers to add my hardware ID with no luck. I'm somewhat new to modern Android so I may be missing something obvious.
View 4 Replies
View Related
Nov 16, 2015
How do you change the font on this device? Through the usual font app on the play store ?
View 10 Replies
View Related
Feb 21, 2016
Recently, a friend lost a phone. Apparently, it was turned off after being found. When going to Android Device Manager, it only indicated that it couldn't locate the phone. I thought that it would show its last known location, but it did not. Shouldn't it?
View 1 Replies
View Related
Feb 14, 2016
Snapchat is not working right after I tried to use snaprefs to upload a pic, I cleared app data to get snaprefs working! I did softreboot a few times, then when I tried logging in snapchat I wasn't able to.. I got a pop up saying
"Oh no, your login temporarily failed, So please try again later. If your login Continues to fail, please visit (I can't Add links as I'm a new member)....
Image : [URL] ......
Later I installed rootcloak and tried to hide root acess to Snapchat, even then I get the same message! How to get snapchat working without unrooting ?
View 4 Replies
View Related
Jan 16, 2016
I'm going to preface this with the nagging feeling I may be completely off-base with how I think OTA updates while rooted/custom recovery works, but here goes anyway.
I got my 6P at launch, and immediately went and rooted it. Everything's been fine except for the constant notification that there's an OTA update available. I've got TWRP right now, so just attempting to reboot through the system's standard update installation doesn't do anything.
I thought I'd just grab the manual updates and flash them from the web. I was positive I grabbed the right Before-to-After .zip, but trying to flash it through TWRP just results in it failing. Nothing breaks on the device, it just boots and runs normally, but I'd still like to get these updates installed.
What I'm currently thinking is that instead of chasing down build number update zips, I'd just use the downloaded one specifically and attempt to install it via TWRP. This poses the question:
1. Where does Marshmallow download OTA updates to when it attempts to flash them when you reboot?
and then the follow-ups:
2. Can I even do this via TWRP, or is there a different process that I should use that I've somehow totally missed?
3. Post-OTA update, will I need to re-root? (Not a big deal, just wanting to set my expectations)
View 1 Replies
View Related
Nov 23, 2015
I'm setting up my Nexus 6P and see this option that says I can transfer stuff from my old android to my new one but when I open Google App and go to settings I cannot find anything called "search for nearby device"...where is it? Also, is this feature in just Lollipop and higher?
View 4 Replies
View Related
Dec 14, 2015
I won a Nexus 6P at work but I have a device locked message when trying to enable USB debugging. Seems I have a demo handset but how I remove it?
View 3 Replies
View Related
Feb 4, 2016
Fastboot recognizes my device, gives me confirmation of flash, but the device itself is not registering the commands and is stuck on "Connect USB Data Cable". I don't have my OEM cable and am using the iOrange-E C-A cable. I've tried different USB ports, restarting, etc.
fastboot says that the flash is successful, but the device never takes.
View 1 Replies
View Related
Jan 21, 2016
I am getting things set up to root my Nexus 6p using a Macbook Pro. I have Android Studio installed & I see the platform-tools folder like the tutorial says. But my phone isn't showing up as a device on my Macbook nor is the terminal command "adb devices" showing it. Need to successfully rooted their Nexus 6p using a Macbook Pro?
View 10 Replies
View Related
Nov 21, 2015
There was an app in the playstore that enabled doze as soon as the screen was turned off on the device.
View 1 Replies
View Related
Nov 4, 2015
I've run into a rather odd issue with fastboot. It seems that any command entered comes back with the following:ERROR: Couldn't create a device interface iterator: (e00002bd)
There is no issue with adb, and I have tried re-installing both platform-tools and the entire SDK, but no luck. I don't run into this problem in Windows either,On further analysis, it looks like it has something to do with OSX. I've disable SIP and gatekeeper, and the issue still persists, so it looks like I'll just have to use windows for fastboot!
View 10 Replies
View Related
Oct 31, 2015
I have unlocked bootloader, flash modified boot.img and recovery but when I boot the device I get 'Your device is corrupt and may not work properly' I then get stuck on the google boot screen. When I go into TWRP recovery it cannot mount anything so I cannot even perform a factory reset.
View 4 Replies
View Related
Jan 29, 2016
So I'm running Camera Zoom FX on a stock, debloated, rooted rom. It takes pics fine. However when I try to switch to video mode, it says "video switch not supported on this device"
Is there a fix for this? If not, whats another good camera app tha does actually support video.
View 1 Replies
View Related
Nov 7, 2015
Can I disable the cell signal automatically on the unrooted nexus 6P?
I know I can pop it in airplane mode and then turn back on bluetooth & wifi but I want to automate this process so that when I'm at work it will toggle the cell radio off.
View 3 Replies
View Related
Jan 20, 2010
What is the solution for that?
View 7 Replies
View Related
Sep 8, 2011
I am running the DROIDX, Android 2.3, on Verizon. For my problem I have coined the term "Ghost Fingers" because the major symptom is my touch screen reacting to input that doesn't exist. I have been unable to link a pattern of occurrence or duration to any combination of external circumstances. Though I have noticed that symptoms seem to flair after hours and the condition in general has been deteriorating. The symptoms occur independently of any apps running. The condition has survived two o.s. updates and a Master Reset (actually forced me to perform said reset). I do not currently have nor have I ever had root access. The summation of the aforementioned conditions has led me to the assumption that the drivers for my touch screen have been compromised and that I need to replace or rewrite that section of the kernel that translates position sensitive capacitive changes into computer commands.
View 2 Replies
View Related
Apr 28, 2014
Since the last windows update from this week windows cant detect my nexus 5. I tried everything. It keeps showing up like "Unknown USB Device (Device Descriptor Request Failed)" And i doesn't show up immediately when i plug in the phone. It takes like 10 seconds, then it shows that with a yellow triangle.
View 10 Replies
View Related
Dec 16, 2015
When I try change Notification LED Color, The primary color "Green" and "Blue" do not seem to work. But when I move the slider down, I get RED, Pink, Yellow and Cyan.
Using Elemental-X 1.02 Kernel and tried with Chroma, Noobuilds and PureNexus.
View 10 Replies
View Related
Nov 4, 2015
Any good recs for a USB to USB C cable that is longer than 1 foot? At work I'm constantly plugged into my lap top but this short ass cable isn't cutting it.
View 10 Replies
View Related
Jan 19, 2016
Is there a way in the stock messaging app, or is there a specific messaging app available in the play store where I could:
Draft a txt and then send to multiple recipients without each recipient being able to see the other? Basically the same thing as sending an email to multiple people via BCC option.
Would be handy for business purposes. I don't care if they see my contact. I just don't want them to see eachothers contact since not everyone I'd send to would know the other (and/or want their contact information shared).
Obviously I could copy and paste the same message to multiple people via individual txt msgs... but being able to send a group txt would be way more efficient.
View 1 Replies
View Related
Dec 19, 2015
I got my Nexus 6P in australia yesterday and I was playing around with the settings. One of the things I wanted to enable was Now on Tap but everytime I try and enable it (either through holding the home button, or doing it through Settings), it won't enable! When I click Get Started, nothing happens. If i'm in the settings app, the toggle just turns off after I press Get Started.
View 1 Replies
View Related
Jan 16, 2016
I searched all over the internet for the SAR level in the EU standards but all i could find is the US. (I probably not going to answer to you in the next few days going to work).
View 1 Replies
View Related
Jan 6, 2016
I am rooted on stock 6.0.1 with ElementalX kernel. I have Xposed installed, but I've tried disabling all modules. I've tried deleting the stock clock data and cache. There are no alarms set or off. I've checked the alarms.db file and there are no entries.
How do I get rid of the icon and lock screen info? I only have the Google Clock installed.
The only Google result says to do a battery pull on a different device. Can't really pull the battery on this phone, though.
View 2 Replies
View Related
Jan 18, 2016
I tried to install Cataclysm ROM, and then it went into some sort of installer, after that I tried to reboot, but TWRP said it didn't have any OS?? So i tried to boot it up anyway? but nothing, just stuck on Google Logo. After that I tried to boot into TRWP agian. But then TWRP says "Mount Decrypt Data" and then i have to enter a password?? but i removed my pattern lock before flashing.
Because i made a Nandroid and i read i had to remove the password before making a backup. But then i just press cancel. Then it says " Unmodified System Partition" "Swipe to Allow Modifications" and i do that. Now i have nothing on my SD card?? Then i thought i could flash stock through Fastboot/ADB, but now it won't see my device in ADB? I have updated my drivers, both by Google and Intel But nothing? so i cant return to stock and can't boot up.
Some how i got i to reboot by an ADB command and then i could flash factory image and return to stock.
View 1 Replies
View Related
Nov 23, 2015
I've noticed something since I got my phone and that is that certain notifications (Snapchat and Messenger are the main 2 for at the moment) will not make a sound unless my phone is either: Unlocked or locked with the screen turned on. Sometimes I won't get even get the notification until I actually unlock my phone which then all the notifications (sometimes 10+ messages in a facebook group) will pop up and vibrate my phone multiple times.
View 2 Replies
View Related
Dec 18, 2015
when I open my camera it shows only camera logo and the shot button at the bottom. it happned on stock and I am now on purenexus and the same. what can I do. (its not hardware because camera is working after few seconds when restart and than its crashes)
View 10 Replies
View Related
