HTC :: Unlock A AT&T 8925 Tilt
May 2, 2010How do I unlock this phone?
View 1 RepliesHow do I unlock this phone?
View 1 RepliesHope this has not been asked somewhere else, but I bought used Tilt form a co worker, was told by AT&T that there should have been 5 tries to unlock, when I got it there were 3. I used 2 got one left. The IMEI # on the phone and when checked for electronically are the same. The unlock code was verfied sevaral times through AT&T and I have a european sim in it. And am unable to unlock. When the phone starts up it takes you directly to the unlock screen. Any idea why I cant unlock this? 1 try left and its not good for Europe!!!
View 6 Replies View RelatedBought a HTC Kaiser 8925 Tilt about 3 weeks ago.Put in the sim card from my AT&T Sierra wireless USBconnect Mercury air card unit .was able to connect to internet using it with no problem.When phone arrived it had windows Mobile 6.0 installed so I installed 6.1.Everything works fine after the upgrade except the air card feature.I can connect to wifi when I am in town but when I get out of range and need to use the air card feature of the sim it does not work and I cannot connect to the internet.If I do a hard reset would it revert back to Windows Mobile 6.0?I like the looks of 6.1 better but need the internet access that the air card feature provides.
View 1 Replies View RelatedI did a quick search and didn't find anything about this problem. I'll try to explain what's happening and hope somebody can give me some ideas.There are 3 towers that I use when I am driving around for work, all almost in line with one another.I live at A and have EDGE service there only. I know and accept this. I work at B, where there is 3G. Tower C also has 3G.The problem I have is that when I go from A to B, my phone does not automatically switch to 3G. In fact, I let it be all day today and never switched from EDGE. Its not until I get into range of tower C that it switches over. If I come from C to B I have 3G coverage at B, but if I come from A to B it doesn't register.
Its difficult to explain with words but I hope that works.Is this a problem with the radio, or the phone, or something else? Its terribly frustrating as I spend a lot of time driving between these several coverages and want the changes to be as fluid as possible.I failed to mention that I have the newest firmware from HTC on the phone, the one that gave me WM 6.1. I didn't want to change to a cooked ROM until I got everything figured out.
I know this may sound like a VERY very naive/dumb question but how does one turn off the phone (other than pulling the battery out!)?? Obviously I've pressed the power button but that does nothing. Is there some type of trick to this?? Also, how do you wake up/unlock it other than having to flip open the keyboard?? Sorry but this is my first non S60 phone.
View 2 Replies View RelatedIs it possible, and if so, how? I have a lot of texts on my Bold that I want on my new Tilt 2. I know how to do it in reverse, but not from BB to WMo.
View 1 Replies View Relatedi am looking at buying a tilt 2 from at&t (upgrade from a pantech duo). basically i am really craving wi-fi. i want the wifi because i cant afford the unlimited data package per month (im a college kid, and those prices are just ubsurd! ). and so i was thinking about upgrading and then because you have to buy the data package with the phone canceling it like the second day i have the phone.. however i heard from my cousin (who has like a nokia e71) that he tried this and after he canceled it he says his wi-fi does not work now b/c he does not have the unlimited data plan. this is just so plainly a money grab and selfish by at&t..
is this the same case with the htc tilt 2? and if so are there any easy hacks around it? or would it better to buy an unlocked one from ebay?this is pretty much the deciding point on whether i buy one.
I just started having problems with my tilt in that it can't maintain a 3G connection. On EDGE/GSM it works just fine but as soon as I get in range of a 3G tower it connects for a few seconds and then boots me off the network completely. It then searches for a while, finds the signal again, and the cycle starts over. I've tried a few different sim cards to no avail. Is this something in the software or is my phone an expensive paperweight now?
View 3 Replies View RelatedI am SUPER new to phone flashing, so please bear with me. I have an HTC AT&T Tilt 2...BUT I also have a MetroPCS phone.
1: How do I flash my AT&T Tilt 2 to work on MetroPCS Network? (and if this is on another forum or thread, please be nice and tell me where)
2: Is there anyway to "transfer" my existing MetroPCS number to my flashed Tilt 2 when it is done?
I am located in San Fran Bay Area if I need to take it to an expert to do so, but if it is possible to do on my own.
I just noticed that I cannot tilt the screen anymore (when I hold it vertically screen doesn't adjust). What might be the problem? And how can I solve it?
View 5 Replies View RelatedI'm really surprised to not see more posts with questions or information about turning off the tilt function of the 9800. The most annoying thing is that I like showing 3 rows of icons on the home screen, but if you tilt it, it changes to 2 rows, tilt it back to portrait and it stays at 2. This happens every time. Not to mention, on a reboot, it reverts back to 1 row! Unlike the Storm, you cannot set a default number of rows. Regardless, I would ONLY use the landscape option while watching videos....so the tilt is very annoying. Anybody know of any way to turn off the tilt function? Maybe in the programming?
When I had my Storm, there were plenty of applications out there to stop the tilt, but ALL BUT ONE did not retain the settings after a reboot. This was very annoying. Even the one that did retain after a reboot, sometimes failed to work properly.
My Xperia z5 keyboard don't let me hit keys r f and x unless I tilt it vertically. It's the same with different keyboard skins, apps and configs.
View 6 Replies View RelatedBattery pull, etc. makes no difference. Assuming it is dead hardware.
View 1 Replies View RelatedI just noticed that I cannot tilt the screen anymore (when I hold it vertically screen doesn't adjust).
View 6 Replies View RelatedIs there a way to set the tilt setting in your BB Storm 2? Sometimes, even in portrait mode, it goes into landscape mode and in landscape mode, it sometimes revert to portrait.any help?Is there a setting I can mess with to set it right?
View 7 Replies View RelatedI recently bought Nokia 7020 Flip phone and found this problem with primary display which is 2.2 inches. Problem is you cannot read out the screen when you tilt the screen even 30 degrees. Photos just look like as negatives when you tilt the phone to 60 degrees angle. You can see the correct display on the screen only when it is exactly in front of your face. Is this a problem with my phone or it the problem with Nokia 7020 Flip phone itself.
Nokia Dealer told me that Nokia has introduce LCD screen for this phone and not TFT screen as found in any other model of Nokia, hence this is a normal behavior. You will see the display correctly only when it is exactly in front of your face/eyes.
I cannot check with any other dealer as they do not have any demo model of the phone which I can operate. All are factory sealed and dealer refuse to open the box to get hands-on experience. Even he refused to take back this phone saying this is normal behavior with this model, when I told him that I want to return this phone for this screen display problem.
I still cannot believe that Nokia will introduce this type of screen in this newer model, where user will have to keep the screen in from of his/her eyes without tilting even 30 degrees to see the correct display on the screen.Whether Nokia is compromising on quality to reduce the cost? Could anyone please confirm on this behavior of Nokia 7020 flip screen.
I recently noticed that my screen doesn't respond to go on landscape mode when I tilt the phone.. Auto-rotate is on, I never experienced this before.. I saw that other ppl also had this problem, some with the update.
View 9 Replies View RelatedWhenever im at the homescreen, and i tilt the phone to the left..it will start switching to another screen..when i do this in the browser/message or something the cursor will start moving which messes everything up..is there a problem with it or is this a setting?
View 1 Replies View RelatedIve been using the Sensation since more than two weeks now.... At first it was perfectly fine but now Im having problems with the auto rotate... When i tilt the phone it does go to the Landscape mode however when i tilt it back it fails to go back to portrait.... Its getting a little annoying now so is anyone facing the same problem?
View 2 Replies View RelatedWhen ever I try to unlock (dragging lock button from left to right) , I am unable to unlock in one go. It is taking multiple attemts to unlock my phone.I also observed that when I get to call, to cancel dragging the icon from right to left this is required multiple attempts.i.e many time dragging icon from right to left.
I don't know whether it is software problem or hardware. I have tried the repair operation also. my xperia neo is uptodate and running 2.3.4 os.I also tried to un install apps but I couldn't find any difference.Also once I unlock, those 5 screens, I can scroll inbetween and can touch home button. But when I long press on the screen to add widget/folder I am unable to do it as soon as I unlock phone. It is taking some time to respond.
As I purchased this phone in UK and using it in India, I am not sure how much service I can get in india from SE.I have bill for the mobile too.in other posts somebody told me to remove yahoo and i did the same but didn't find any difference.in short the touch scence is not responsive during unlock and for a while once get the home screen. I also installed andvance task killer app and killing apps frequently that also not making any help.
I set a screen lock code today and used it several time with no problems. Tonight the unlock screen shows 'Enter Password to Unlock' but when I enter the pin code, it will not unlock.
View 1 Replies View RelatedI have the 8 digit network unlock code for my Atrix2, but when new carrier sim card is inserted it doesn't say sim not provisioned, and doesn't provide text box to enter code.Instead it gives me phone and text service but not mms enternet
View 1 Replies View RelatedI lock my bb my pressing the top left keypad lock button but when I press it again to unlock it it won't unlock!! The only way to unlock is to take the battery out and put it back in! It only started doin this yesterday.
View 13 Replies View RelatedI am having issue where phone will not come out of lock screen. Buttons light but screen stays black. I can reboot and use phone so I know it is not hardware. I can still blindly touch screen and maybe get past lock but stays black til I reboot.
View 2 Replies View RelatedI was searching for topics related to this topic, describing the diference beetwen manufacture unlock vs bootloader unlock. I bought an unlocked Atrix in AT&T, so I could use it at any company or overseas. Is this mean the bootloader is also unlocked? Or these are diferent things?
View 2 Replies View RelatedI remember my z2 was able to set the bluetooth unlock range between my phone and my smartband at android 4.4, but this function seen gone in android 5.1,i can unlock my phone in android 5.1 with any range just need the bluetooth connected.
View 6 Replies View RelatedI have my phone set to fingerprint unlock but it says to swipe to unlock. Only after I restart it it asks for my fingerprint. I want it to stay fingerprint to unlock.
View 2 Replies View RelatedI've recently moved from Orange to O2 and my iPhone 3GS doesn't recognise the new O2 SIM card. Orange told me that they would send me an unlock code from Apple a month ago. Talked to Orange today and they say I need to get it from O2 but O2 say that's not the case.
Info:
iPhone 3GS, iOS 5.1.1
My iphone4 had been allowed to unlock by AT&T but I still can't unlock by chinese sim card.More than three AT&T staffs told me than my iphone4 had been allowed to unlock and sent me instruction on how to unlock my iphone4.First,I had tried to put the AT&T sim card in the iphone4 for active the iphone,then I change the chinese sim card in the iphone4.but still fail.My iphone base-band is 02.10.04.Is question from it?
Info:
iPhone 4, iOS 5.0.1
I buy from best buy with full contract price ,i want to permanent unlock but i cant create att account because i have not any linked account to create att acount
Info:iPhone 3GS, iOS 5.0.1
my touch screen cracked after I droppet my Xperia Mini Pro on the pavement. I can still see everything on the screen, but when I try to unlock the phone by sliding the touch screen, there's no reply. The keyboard however works fine, so what I'm wondering is if there's any way for me to use the keyboard to unlock my phone?
View 2 Replies View Related