BB Torch :: Equalizer Function With Bluetooth Not Working?
Nov 4, 2010
I have the Torch 9800. I wish to adjust the equalizer for the sound playing through my bluetooth, Motorola S10-HD. Any adjustment I make has no effect on the sound. It was the same thing when I tried the Plantronics BackBeat 903+, no change in sound when the equalizer is adjusted.Now, if I were to use a wired headset, the equalizer works perfectly!
So why is it the equalizer has no effect on the sound when using bluetooth? And how can we get those programers to allow equalizer function for bluetooth devices?If this is a battery saver function, tell me about the extra drain on the battery and allow me to make the decision.Blackberry Device: Torch 9800,OS Version: 6.0 Bundle 2647 (v6.0.0.600),Platform: 6.6.0.223
I am a bit disappointed with the N900's volume loudness controls, the audio player doesn't have an "Equalizer" either.Is there any Maemo software apps for increasing volume loudness? I just purchased my N900 yesterday & is new to Maemo Devices, I hope you don't mind if I repeated the same questions previously posted, best regards.
I love the camera on my phone, and constantly use the focus function with the trackpad. It suddenly stopped working - and I cant figure out why. Went through all the options, did a reboot, removed the battery etc - same result. The trackpad works on the bottom menu items, but it used to be that I could use it to focus in and out (up and down).
My E63 had software version number 100.xx.xx when I first bought it and the music equalizer worked well.Then I updared it to version 200.xx.xx and the equalizer stopped working in headphones.then when the version 400.21.013 was out I thought the equalizer problem would be solved but the problem remains in the new version.
I wish Sony Mobile would revert from their stance of not offering the global equalizer setting by default to all apps. Before Lollipop landed the Clear Audio + setting applied to all apps including YouTube, Walkman, Radio Tunes etc. However, after lollipop landed this setting has been moved to an exclusive setting that App developers have to specifically code for. This situation is not acceptable as if they enabled global support for the EQ then if one simply wishes to turn the EQ off they can do so in the sound settings. Now accept for a few music apps you have no option to use Sony Clear Audio + sound enhancements which is sad. The phones output volume is not that loud which makes this EQ settings important to give that extra punch in the music. To me this decision is a deal breaker as Samsung and Microsoft have the global EQ enabled. Sony's decision makes no sense to me and it ruins what would otherwise be the complete experience on the Z2.I am considering a Lumia currently but would like to stick with my Z2 if there is hope of resolving this issue soon.
When you are playing a song on the factory installed Google Play Music app or any other app with an equalizer or when using a separate equalizer and you increase any of the bands in the equalizer, the overall volume of the song drops.
To easily reproduce the problem, start playing a song on the Google Play Music app, go to settings, select equalizer, select advanced. Set the equalizer bands to flat (in the middle settings for all bands). While a song is playing, raise any equalizer band and the overall volume of the song goes down dramatically, like by half. This is especially noticeable as you increase the 16k slider. This is not how equalizers should work. A working equalizer should amplify the band you increased but leave the volume on all other bands the same and thus not lower the overall volume of the song. This is happening with all equalizer apps I've installed (besides the stock Music FX and SoundAlive equalizers) and I've seen the exact thing happen with three other equalizer apps on this phone, so it seems like a specific Samsung Galaxy S5 problem.
I was very happy to finally upgrade my Xperia to 2.1 and was told I would be able to do outgoing calls with the bluetooth connected.I receive calls through my Bluetooth device but still can't make outgoing calls.Is there a special headset?
My Z3 is able to connect to my W10 PC through Bluetooth (or so the properties page on my PC says) but I can't get any Bluetooth functions to work besides sending/receiving files. Ultimately, I'm trying to be able to use my PC as the "bluetooth headset" for my phone, so that I do not have to take off my headphones to answer calls to my mobile.
When my phone is connected to my car's bluetooth (Belkin Aircast) it auto picks up after the first ring. This is very annoying for 2 reasons:
1) If I don't want to speak to the person I should be able to ignore it. 2) When the call comes in and I'm listening to the stereo I have to switch to the auxiliary before I can use the phone but the person calling hears whatever I'm listening to.
It would seem that the ALT function is stuck because I can only access the numbers and not the letters on both the physical keyboard and the virtual keyboard.
I have reset the phone several times. Updated with the latest software, even reset to factory setting and still nothing. My phone is locked with a password so I can't even enter my PIN because it comprises of letters. My carrier can't do anything and my warranty has expired.
I have read some of the other similar problems and my phone has no case or cover on it. On top of it all, it is stuck in SOS mode so I don't even have a signal so I can't even receive phone calls.
I switch my E72 phone off for the night. In the morning the alarm rings, and I like the snooze function, I snooze several times (5 minutes).However, every now and then, the phone will not ring after a few snoozes, but will remain silent (and I get late).Usually does it after 25 minutes (5 snoozes),I cannot switch the phone on - I have to take out the battery, and put it back.Then it will immediately ring - usually shows the last snooze time, but of course I will have to set the time.It has been to the service, but this problem has remaind, but it is very annoying, usually it is very important not to be late!
My phone's speakers don't put any sound when I call somebody, however they can hear me fine. Also, when somebody calls me and I put my phone on speaker, I can hear them and they can hear me just fine.
today i tried listening to music on my iphone 4s,only to find that my volume adjuster had disappeared.and just to clarify,when i say that it disappeared,i mean that when i press the volume buttons on my phone,i see the speaker icon but the gauge bar is gone. i tried to test if this issue was only happening in one place, by checking out if i could adjust my volume through my Internet app. unforuntately, the volume slider has disappeared from the app as well.
I am using PC Suite 7.1.40.6, under Windows XP Pro SP3. I have a 6600 fold phone, with the latest firmware (5.60). I connect via USB cable. PC Suite works perfectly apart for one thing. I cannot get the Sync function to work at all. If I run it, the program starts, and shows the phone as being properly detected and connected. However, if I press the Sync button or the Settings button, absolutely nothing happens! No error messages, just nothing. The only thing I have which I can sync with is Outlook Express, but surely even if I had no compatible programs installed I should still get something when I press the Settings button at least? I've tried repairing/reinstalling PC Suite and no difference. As i said, all other functions work fine.
My right function key has a function assigned to it, but is not working. The left one is fine, but not the right. Is it possibly locked for some reason, or just not working?
After upgrade with 5.1.1 on phone apparently the notification dropdown function not working at all even though I try so hard to master reset my phone thought my phone was hack by virus.
The phone was bought from the apple store unlocked, it's been almost 6 months. I download an upgrade that is supposed to fix bugs, and I loose the main phone function ? this product is a joke or what ? apple must be aware of this....
I recently upgraded my iphone 3GS to the IOS 5.1 however i have noticed that now i am unable to use the camera whilst my phone is locked.
I can use the button but the screen kind of jumps up, like when you double click the home button, to reveal the bottom part of the camera, the shutter and camera/video camera slide, but then the locked page comes back down to hide the camera. Also the function button isnt properly formed, i have the camera but instead of being in a box just the top and bottom lines are shown.
however, RIM is not taking responsibility for fixing it. Yet another company willing to take my money for a product that they are unwilling to back. I have tried every suggestion posted to rectify the scroll issue. None of them work. I would like to get the name of the person at RIM to whom I can write a letter.
Recently switch jobs and had my Torch removed from former employers BES. Received confirmation that it was completed and emails stopped as expected. However, return address if found and password requirements stayed on the phone. Brought phone to Verizon service tech with the intentions to wipe phone. They were unable to perform function as the options feature and icon are missing. Service tech believed that it was removed or hidden as part of former employers security. Former employers IT group claims not to remove functions on BB phones and phone must be defective. Phone has served me well with no complaints. Would like to use it with new employers BES. Anyone know how to wipe or restore. Nothing on this phone is important. Running Software Version 7.1 Bundle 1737
Ever since I updated the softward on my device (about a week ago) my lock function doesn't work. I have set all the same securities as before (Options/Password/Enable) however when I push the "Lock" button on the top of the device it only locks they keypad. If I push it again it simply unlocks the device, it does not prompt for a password. I have to wait for the device to reach it's security time out before there is a password prompt to unlock.
A few weeks ago the click function of my trackball stopped working. I think it was because I had moisture and dirt on my hand when I picked it up to use it. I have been reluctant to take it apart since I don't have a backup BB and it is still 90% functional without this feature working. Today, I did 3 things. First, I took rubbing alcohol and a q-tip and soaked the trackball. Then I used a piece of a straw, threaded it down between the black piece around the trackball and the chrome bezel, gently pulled up on it and used as much compressed air as possible to blow out the area under the trackball. Then, while the battery was out I pushed on the trackball assembly from behind pretty hard. I repeated this procedure a few times, and it suddenly started working. It was intermittent at first, but is working normally now. For how long I don't know but thought I would share this for others that have the same issue.
I want to delete an email account on my Bold 9700. I click on setup, email acccount, internet mail account then nothing happens other than it takes me back to the set up menu screen. Seems to be stuck in a loop. I recently downloaded the new 6.0 OS.
