I switch my E72 phone off for the night. In the morning the alarm rings, and I like the snooze function, I snooze several times (5 minutes).However, every now and then, the phone will not ring after a few snoozes, but will remain silent (and I get late).Usually does it after 25 minutes (5 snoozes),I cannot switch the phone on - I have to take out the battery, and put it back.Then it will immediately ring - usually shows the last snooze time, but of course I will have to set the time.It has been to the service, but this problem has remaind, but it is very annoying, usually it is very important not to be late!
I have recently been given a nokia C3 - 01 phone. I love it but the only problem is, I don't want the snooze option on my alarm. On my old nokia 6300 I had the option of turning the snooze off from settings. I have looked through the manual but cannot find anything that says how to turn the option off totally. How to alter the snooze time but not how to disable it.
This alarm is terrible! With my old phone to snooze I just had to press a button and it would start snoozing. In this phone I press the unlock button and it seems to snooze but it has just gone quiet! At 530 in the morning I am having a little trouble pressing the tiny unlock button then touching the screen to unlock it then having to press the correct side so that it will snooze and not turn off! There is a reason the snooze button is so big on an alarm clock! Is there any way to change how the snooze functions? I think I may be unlocking the phone and hitting the touch screen or something - is there someway to turn the touchscreen off at night or something?
How do I change the interval time on the snooze function, when in alarm mode. It goes off e 9 mins, and I want it to go off every 5 mins. When I got the hone it started off with 5 mins, then automatically changed to 7 mins, and now 9 mins. I cannot find where to change it.
I have a Bold 9000 that started out with the original Rogers operating system some time in 2008. I've upgraded it through various 4.6 (or is it 4.7?) OS versions and I'm now on 5.0.0.662 (I haven't gone to .681 yet mostly because I keep forgetting). On every single version of 5.0 I've tried (Wind, Azercell, etc) I have run into two problems.
1. The camera takes pictures that are way too bright when using the flash. It's like it doesn't reduce the exposure time when the flash is on - almost every flash picture is totally white. This happens in auto flash and when you force the flash on. Pictures without the flash work the way you'd expect them to.
2. I can't snooze the alarm using a side key while it's in the holster any more. The alarm ringtone starts playing, I press the volume up or down key while the phone is still in the holster. On OS 4.6, this would cause the alarm to snooze for ten minutes. On OS 5.0 it just restarts the alarm sound! Totally pointless. This is especially annoying for me as I need to take pills on a 12 hour basis and so I have alarms going off at least twice a day, every day.
I am using PC Suite 7.1.40.6, under Windows XP Pro SP3. I have a 6600 fold phone, with the latest firmware (5.60). I connect via USB cable. PC Suite works perfectly apart for one thing. I cannot get the Sync function to work at all. If I run it, the program starts, and shows the phone as being properly detected and connected. However, if I press the Sync button or the Settings button, absolutely nothing happens! No error messages, just nothing. The only thing I have which I can sync with is Outlook Express, but surely even if I had no compatible programs installed I should still get something when I press the Settings button at least? I've tried repairing/reinstalling PC Suite and no difference. As i said, all other functions work fine.
Do you remember date bug and snooze bug?Well, alarm bug strikes again!Ok, this time is not worse as the previous (I mean, there is no risk to miss an appointment or sleep till noon), you will get only a WSOD (White Screen Of Death) 1. At 11.45 PM set an alarm for the next day at 8.30 AM 2. Turn off the phone 3. Go to sleep. Remember to sleep at least 8 hours 4. When the alarm rings at 8.30 AM, snooze it 5. When the alarm rings at 8.35 AM, snooze it again 6. When the alarm rings at 8.40 AM, stop it 7. When the phone asks "switch on phone?" answer Yes 8. Insert the PIN (if any) 9. Congrats, you got a WSOD! I was sure to be able to reproduce it so I made a (very bad quality) video, I can post it if you need Link to the last part of the video: http://www.zshare.net/video/7815866644a5ee87/ Notes: a. I did a deep reset *#7370# before setting the alarm (the video proves that) b. I don't know if snoozing (points 4 and 5) is necessary (you can snooze more times), I can test this once a day, tomorrow I'll know more.
X6 Alarms, how do they work. I see it can take multiple alarms (one up on Blackberry), BUT how do you switch them off, or snooze? When the alarm goes off, a partly lit screen appaears with a STOP and SNOOZE button on the touch screen. Tapping either does nothing. Even unlocking the phone on the side slideer and then taping on these two tough screen button does nothing!. Only recourse is to click on the Red Telephone button, which seems to have the same effect as a snooze button. Still no idea how to actually switch it off, and tend to go into alarms and delete it or reset it to a prior time. Also do alarms that are set for "Weekdays" stay, or do you have to reset (re create) the alarm each time.
I've got a Nokia N9 64GB with PR1.1 (20.2011.40-4) FW Version.I've noticed that when the alarm clock goes off I can only have two snooze periods, i.e., after the initial alarm there are max. two more alarms turning the phone face down.Is this a default max.? Any idea how to change this ?(I believe in Symbian the default is 7)
I've had my N95 for about 18 months now. I don't use a lot of the things on it, but one I do use is the alarm clock to get me out of bed in time for work. I like to have a bit of "coming around" time so I usually have a few snoozes before getting up. I generally switch the phone off at night so I don't get woken by text messages and calls.This has worked fine since I got the phone.However, this week I upgraded to the new software and since then I've had the following problem -When the alarm goes off and I press snooze (which makes the phone switch off again)the alarm doesn't come on after 5 minutes. However, once I turn the phone on the snooze alarm immediately comes on even if this is 10 minutes after it should have. I tried the following test to try to replicate it once I had got to work. With the phone on, set the alarm for a few minutes in the future, then snooze - works fine. With the phone off do the same - works fine. So it appears that this problem either happens when the alarm is for the following day or when the phone has been off for some time.Has anyone else found this and does anyone have any suggestions of how it could be resolved?
Had my phone about a month and have had the slide to answer or reject calls and also the slider for turning my alarm off or snooze, but have just noticed that i have dull buttons to press now, any one know how i can get my slide back, did kinda like it!!!
Is there a way to snooze the alarm clock without having to open my eyes and do it via the touch screen. I use to be able to press the red button on my previous phone.
I have just updated my 5800 software via the updater After update I have problems - anyone else also have these problems?in messaging the old software would capitalise on each new line the new software will not however if I make a space and then backspace then the line capitalises also if I go out of editing then come back to editing the new will capitalise .ALSO Problem with the alarn.When the alarm goes off I am unable to use the touch screen to stop or snooze anf the stop button does not work. I can only snooze till the third snooze when only stop is available.
I upgraded my phone to V40.0.005 s/w recently. Now when I use the alarm on my phone I cannot use the "stop" or "snooze" buttons, I touch the options but nothing happens. If I click on the Red "end call" button then it seems to put it into Snooze and the alarm goes off again after ten minutes....
I just bought 5530 Xpressmusic yesterday and new to smartphones/touchscreens. I have a question.Whenever the phone touch screen is locked, and if i get a call, i am not able to answer or reject it directly from touch screen, unless i manually unlock the screen using right side lever. Although i can see the Answer/Reject option in screen, when i touch them they don't work. Also the Green/Red options at bottom of touch screen are also not working.Similarly, when i set an alarm, i cannot snooze or stop the alarm immediately in touch screen when the alarm rings, unless i unlock the touch screen again manually.Can someone help how to get this working, or is it the design?
My phone's speakers don't put any sound when I call somebody, however they can hear me fine. Also, when somebody calls me and I put my phone on speaker, I can hear them and they can hear me just fine.
today i tried listening to music on my iphone 4s,only to find that my volume adjuster had disappeared.and just to clarify,when i say that it disappeared,i mean that when i press the volume buttons on my phone,i see the speaker icon but the gauge bar is gone. i tried to test if this issue was only happening in one place, by checking out if i could adjust my volume through my Internet app. unforuntately, the volume slider has disappeared from the app as well.
My right function key has a function assigned to it, but is not working. The left one is fine, but not the right. Is it possibly locked for some reason, or just not working?
After upgrade with 5.1.1 on phone apparently the notification dropdown function not working at all even though I try so hard to master reset my phone thought my phone was hack by virus.
The phone was bought from the apple store unlocked, it's been almost 6 months. I download an upgrade that is supposed to fix bugs, and I loose the main phone function ? this product is a joke or what ? apple must be aware of this....
I recently upgraded my iphone 3GS to the IOS 5.1 however i have noticed that now i am unable to use the camera whilst my phone is locked.
I can use the button but the screen kind of jumps up, like when you double click the home button, to reveal the bottom part of the camera, the shutter and camera/video camera slide, but then the locked page comes back down to hide the camera. Also the function button isnt properly formed, i have the camera but instead of being in a box just the top and bottom lines are shown.
however, RIM is not taking responsibility for fixing it. Yet another company willing to take my money for a product that they are unwilling to back. I have tried every suggestion posted to rectify the scroll issue. None of them work. I would like to get the name of the person at RIM to whom I can write a letter.
I have the Torch 9800. I wish to adjust the equalizer for the sound playing through my bluetooth, Motorola S10-HD. Any adjustment I make has no effect on the sound. It was the same thing when I tried the Plantronics BackBeat 903+, no change in sound when the equalizer is adjusted.Now, if I were to use a wired headset, the equalizer works perfectly!
So why is it the equalizer has no effect on the sound when using bluetooth? And how can we get those programers to allow equalizer function for bluetooth devices?If this is a battery saver function, tell me about the extra drain on the battery and allow me to make the decision.Blackberry Device: Torch 9800,OS Version: 6.0 Bundle 2647 (v6.0.0.600),Platform: 6.6.0.223
Ever since I updated the softward on my device (about a week ago) my lock function doesn't work. I have set all the same securities as before (Options/Password/Enable) however when I push the "Lock" button on the top of the device it only locks they keypad. If I push it again it simply unlocks the device, it does not prompt for a password. I have to wait for the device to reach it's security time out before there is a password prompt to unlock.
A few weeks ago the click function of my trackball stopped working. I think it was because I had moisture and dirt on my hand when I picked it up to use it. I have been reluctant to take it apart since I don't have a backup BB and it is still 90% functional without this feature working. Today, I did 3 things. First, I took rubbing alcohol and a q-tip and soaked the trackball. Then I used a piece of a straw, threaded it down between the black piece around the trackball and the chrome bezel, gently pulled up on it and used as much compressed air as possible to blow out the area under the trackball. Then, while the battery was out I pushed on the trackball assembly from behind pretty hard. I repeated this procedure a few times, and it suddenly started working. It was intermittent at first, but is working normally now. For how long I don't know but thought I would share this for others that have the same issue.
