i bought this bb curve 9320 on 15 Aug 2012 from mobile store, since then i'm facing this issue of ringer going off n device reboot all of a sudden, got this checked twice with redington service center, according to redington official software needs to be updated, but they are themselves are not sure whether it will solve my problem or not, infact they suggested to use the device on 2g mode only, have checked the version, it has a latest version installed i.e 7.1.0 bundle 1319. Request help. I'm very disappointed the way blackberry provide customer service and cud not believe that this is actually happening, 15 k price tag not worth for this kind of device
So I haven't had the muted phone call audio since the update, but now I get the silent ringer and silent alarm problem which power cycling does not fix.
I just wanted to make sure that I'm not missing something here.... It appears that for each notification (e.g. each email address, the phone ringer, the calendar alarm, SMS text notification, etc.) you choose 1 setting that carries through to all the different "profiles" (e.g. loud, normal, vibrate), and that when you set it on the different profiles, it merely changes the volume of the ringer and whether or not it vibrates?
On my Curve 8330, I had to set each ringer in EACH profile, so if I wanted I could have BBPro1 as the phone ringer for "Loud," and BBPro2 as the phone ringer for "Normal," and BBPro3 as the phone ringer for "Medium," etc.... The Tour does not have this, does it?
I upgraded my BB Appworld App on my Torch 9800, and when it told me that the device needed to be rebooted i selected reboot now, and the device will not reboot, it just starts and as the status bar creeps along it ultimately just goes back to attempting to reboot again. This goes on continuously. I have taken battery out and sd card and it still does the same thing.
Sprint uploaded lollipop update, camera stopped working. did a factory default hard reset, now it is stuck in a recovery reboot loop. it starts to S5 screen turns off and restarts over and over for five days now?
I've looked at the manuals & contacted Virgin phones support but still can't undo this to restore the ringer. All I want to do is restore the ringer as currently it doesn't ring merely buzzes briefly. Currently at the foot of the dispay it says - Ringer off & there an icon of a speaker crossed out.
After installing 5.0.0.822 update, I did a reboot (alt+right shift+del).Usually, the Bold take about 3mins to reboot, however, it only took about 20 seconds. I saw the Blackberry status bar flash for only a second.I felt the phone did not really reboot. I was also noticing some funny errors when accessing pics or ringtones.I checked the memory and saw the Device Memory as "device memory cannot be read."
2 "fixes" I found: 1. reformat device memory 2. reboot again, either alt+shift+del or battery pull
Have you noticed this problem as well? I found another thread of this happening on .681 without much help either.. Device Memory cannot be read
I have fully wiped the Bold and reinstalled 3 times. I can reproduce the error everytime.I guess I can avoid the problem by doing a battery pull every time instead of alt+shift+del...but that's a hassle.Suggestions? Maybe this is just an inherit flaw for OS 5.0 since .681 and .822 are both showing the same symptoms.
I have a Z2 that got stuck in a reboot loop after attempting an update. I'd like to make sure I get a copy of my data before I hand it in to have it fixed.
I have got an xperia Z3 device and so far everything has been working fine. Since the latest android update however (lollipop), my phone is constantly rebooting itself, when i want to perform a simple restart. I tried the pcc repair tool twice already. it works, but as soon as i want to restart my device, it gets stuck in a reboot loop. Â I also tried removing the sim card. It still gets stuck in a reboot loop.
I tried plugging it into a wall charger for a day, i tried leaving it unplugged for a day, i tried leaving it plugged into the wall without the battery in for a day. I do not think it is the battery or charging related. Oh, and i have 2 batteries, neither let it boot.
So, i tried all the suggestions about App loader. The PIN is not recognized UNLESS, i plug it in without a battery (after i see the charging icon with red X on the screen). If i try to continue, nothing happens until i put in the battery, which immediately removes my PIN to PIN Unknown or whatever. So, it will continue and loader will freeze at step 2, device initialization.
Anyone had this exact issue or know how to get passed this point?
For reference, i never dropped it or damaged it. Actually i haven;t been using this phone, i decided to update it, all went well. Took the battery out and left it for a couple weeks. Went back to use it and this is what i got. Oh, and I tried JL_CMNDR and nothing happens.
Like i said, no error screen, i get a red LED, it attempts to boot up, but it barely moves and then I get black screen and red LED again and it just loops this process.
* I do have the extra ATT Insurance. However, I've had it for 1.5 years and it has been externally modded to ****. I could easily change it back to stock parts, but the "sticker" is gone. 1. Would ATT let me exchange it? 2. Does it have all my info on it?
I bought S6 edge a few days back, yesterday it prompted restarting the phone after turning on the virus protection after turning off it doesn't boot and is frozen on Samsung logo screen . Tired everything resetting it through ODIN but ever after rooting and resetting it still does not reboot.
So I preorder the RAZR and got it a day before the 11-11-11 launch. I had my phone setup and was about to go to bed and my device started a continuous reboot cycle that made the battery go dead by morning. I went to local store and the looked at it and said that they couldn't fix it will just give you a new one.I got a new RAZR and other that battery life issues which I am not happy about I can deal because I can have it charging in my office during the day. Well last night about 7 it started continuous reboot cycle this time I plugged it in and did a reset holding the power and the down volume. It been rebooting since last night I am not in my office with it plugged in.
Is there a way to turn off the ringer on the BB when using a Bluetooth headset and simply have the the BT headset notify you when you have a call? My old Motorola I870 would by default not ring and just let my BT alert me via the headset when an incoming call is being received. I don't want to use a quiet mode if at all possible? Because if in the event I should turn off my BT? I could miss calls if I forget to turn the Phone back to normal mode.
I have a Blackberry 8520 and my profile ringer changes to vibrate when I put in in the holister. can anyone help me change it so it doesnt do that anymore?
I have a Curve 9300 (OS 6). My ring tone is set to go off always (set to normal), no custom contact ring tones set, etc.But when I get a call, no ring. In fact, the screen displays "Ringer Off" on the screen. How do I get the ringer to work?
I need to know how to turn on and off the ringer on my 8330, not matter what setting I have it on it does not ring, it vibrates. I am not sure if I turned something off or what but I have tried everything I can think of.
I am no longer getting sound from the phone - the ringer does not work and I can't play music.I have tried taking out the battery and it still does not work.The last sound I heard was the alert for a text message and it does not do that anymore. I can hear fine when talking on the phone.I would appreciate help with this as I have not found an solution that works yet.
I have got Curve 9300 with OS v5.0.0.977. I am unable to receive anything using Bluetooth from the paired device but sending anything to other device is OK.
Reboot complete (main screen/carrier logo) First Time and Device Usable Second Time Minutes:Seconds 3:13 - 3:37 Custom Theme 3:11 - 3:25 Default Carrier Theme Theme's have no real effect from what I've noticed. Unless you have a really big gfx intense theme. 3:13 - 3:23 Password 3:13 - 3:25 Password + wallpaper on mem card 7:09 - 7:21 "Memory Clean Turned on" + Theme + password + wallpaper on mem card Re-test (that was way too long) 6:36 - 6:45 "Memory Clean Already On" + Theme + password + wallpaper on mem card. 3:23 - 3:45 "Encrytion Media Card Only" + BerryWeather + Theme + password + wallpaper on mem card + Mem Compression Memory Clean and Encrytion (Device Memory Enabled) either one of those on will increase reboot time by atleast 2-3mins. When enabling Device Memory encryption Memory Clean is automatically turned on and can't be disabled. So in my testing reboot time was between 6-7mins. My current config setup is that last test. Since Password is on, I see no need for Device Memory encryption to be on. Without the password you can't gain access to device files. ZonaSnap , QuickLaunch, Blink all preloaded during each test. 8 Email Accounts, about 80 read emails, and 100+ sms, 41 apps anyone that is getting 1-2min reboot please post your settings.
I updated my blackberry software overnight on my device (curve 9330) and when I woke up in the morning there was a constant white screen with a little diagram and 561 error message underneath. I followed the instructions to update the device software on my desktop and had the latest version (6.1.0.35).The device does not connect to the PC at all and a battery reset on the device did not help.It is frozen with the white 561 error message screen.
Here what I done since the begging of the problem: when I first use, everything was ok (at least to me). One day without remembering to disconnect the device from Windows XP Sp2, I disconnected the USB cable to aswer a call (it was in mass storage mode).
After that don't remember exactly how but a few minutes laters after reboot the n900 some widgets disappeared from desktop. So I added them one more time but they won't come to desktop... I repeated many times the adding and after that the N900 gone crazy. Some applications still works but others didn't show the icon program on the menu, only the name under the icon appear, and when i tried to execute one of them the screen returned to desktop with all the widgets that first didn't show and the device reboot alone.
So I decided to flash and I followed every single step (that I found in a thread wrote by adamf) to flash maemo on N900 and I did it. But when I try to erase mass memory, the dots on the N900 screen stopped move and in the DOS windows there was: "suitable USB device not found, waiting". The N900 seems freezed. After 30 minutes I disconnected the USB cable and turned ON the device and it is OK. Well, all data is still there. Do I need to reset mass memory to erase the programs downloaded from the application catalogues? Flashing maemo doesn't do that?
Tried two times but the same thing happens and I quitted. I started to use the device and it works fine but I can't install some applications that first I had installed, like bounce evolution, APP widget, facebook widget (impossible installing error). But forecast weather and other widgets works... I can't understand why. Tried also other flasher like Global (first I have intalled Middle East) but I have the same error...
My husband got a curve 8530 the other day. All of the people in his address book have "classic ringer" as their custom ring tone along with the volume set about midway like its some kind of default setting. I have tried changing the profiles/ringtones and creating new ones (with different tones) this does not change the ringer for those 80+ people. In the Set Contact Alert menu there are only 3 people with a custom tone showing.The Classic Ring is not loud enough for him to hear and no matter how I try to change the default ringer it does not change the ring for the contact list.I've done a battery pull, no change.Updated it to newest OS.Contact list was imported from a Storm 2(he likes having actual buttons to push).
Am I missing something or 1) shouldn't all those people show up in the Set Contact Alert Menu, if there is a custom tone set up or 2) shouldn't their default change if I change the default for the phone.I haven't checked all of them, but did check at least 10 and regardless of what I do they're still the same. Ringer shows Classic all other options say active profile.Is there any way I can change their default ringer without having to give each one a custom ring--too time consuming?
How much are the fast reboot or reboot/kill software really needed on ICS?im finding that even on a large exclude list there are still apps that run, that i dont really need and eat up some of the interal memory.is there any other way other than rebooting all the time to get rid of them? Will rebooting drain more battery energy?
