Just got a second hand Curve 8520 (2010 model) and it's great, but my PC does not recognize my BB using the USB cable. The cable will recharge from the PC but won't connect to each other. I have tried a new cable. My o/s is Windows XP.
View 1 RepliesI have read numerous threads, here at Crackberry and beyond, but I am afraid I have a truly nuked (to ashes) Curve 8310. My son decided he needed a password, then promptly forgot it and wiped the unit out. Being scared that he was really wiping it out (which of course he was), he pulled the battery in the middle of the wipe. I reconnected everything, and it seemed to do a wipe okay.The essential problem now is that I can never get it recognized by a Windows PC when connecting a USB cable. Yes, I have the BB Desktop and app loader installed. A second, known good BB (different model) connects just fine and is recognized. JL_CMDR gives a "port not found" error. Tried invoking LOADER, even with the /NOJVM switch, but nothing ever sees the 8310. Tried the timing issues with battery pull, cable disconnect dozens of times, but I never hear the PC do the double-ding that a USB device has connected, and the Loader application is always blank for the ports.
View 4 Replies View RelatedThat allows you to charge the Razr V3 while using the USB data cable? In other words, such a cable would have to have a 'Y' configuration with two inputs and one output to the phone. The two inputs need to accept the 5-pin male mini USB connector from the charger and the 5-pin male mini USB connector from the data cable
View 4 Replies View RelatedWhy battery is not charging through data cable/USB cable?I'm using Nokia C2-03.
View 2 Replies View RelatedI was given a BB Curve 8310 to attempt a repair. When I attach the USB cable to the BB the system tray does not pop up with a notification that says "found new hardware" like it normally does when you plug a BB in. When the phone boots up it displays error msg " JVM Error 513". I attempted to looking into the device by using "cracmem" and "JL_Cmder" and no data is to be found and thus there is nothing to wipe. I suspect that the device has already been wiped thus the no data. I have pulled the battery from the phone and reinstalled; unplugged the usb cable during the BB boot process and nothing is happening. The DM application loader will not allow me to procede due to computer not recognizing the BB device thus it is not generating the "USB:UNKNOWN".
View 7 Replies View Relatedi put in the cd to register my blackberry on the computer all went fine but now the usb cable wont work for me so cant download things nothin has happened to the cable is only bout 3 weeks old anyone know wat to do want to download music to the phone
View 1 Replies View RelatedI own a Blackberry curve 8900 and I'm having problems updating it to the software 5.0 at the moment I'm on v4.6.1.101.I'm wondering why I cannot update through my USB cable
View 9 Replies View RelatedWant to connect my Sprint Curve 8330 blackberry to a high speed internet connection through a USB connection. Have yet to succeed. Getting messages like 'tunnel timed out' Seeking some troubleshooting guidance if there is some protocol barrier.
View 3 Replies View Relateddoes the 8520 support the otg usb cable
View 5 Replies View RelatedI have attempted to upload photographs off my blackberry to my laptop using a usb cable and it has prompted me for a password, I tried the password I have to access my phone after one minute but this did not work, it then prompted me to put the word "blackberry" into the box. I did this and then it has asked for password again and again and agin, I am no at 9/10 and about to wipe all my information, I have tried all the options. Tried my registration password too. I cant afford for my phone to wipe itself clean.
View 1 Replies View RelatedOK in the past (as in last week) I have been able to connect my BB curve to both my laptop and my desktop without issue using the BB desktop manager, and happily synch diary and address books.
This week my husband has decided he wants to install and run microsofts active synch so he can update his old work phone with his photos and music. This was not a problem on our old PC (8 years old). However I have recently bought a P4 dell desktop, and active synch was not already loaded. I'd asked him to wait until I'd run ghost and got a back up of everything but he obviously could not wait.
Since uploading MS active synch my PC no longer manages to connect to the BB curve, so I can't do any synchronising, or updating of software through it. I can however connect and update via the laptop. The laptop does not have outlook, so it's not keeping my diary or address book up to date. Grrr.
I am having a problem with my phone and is that it does not charge using the wall cable. It does charge with the USB cable when connected to the PC (for now).The cables are the ones that came with the phone. The USB port of the phone is fine. I tested the cable and it works properly.I think that the OS v5.0.0.438 is causing the phone not to recognize when it is connected to the wall.
I am worried that it is a progressive issue and then the phone will not charge at all.Can anyone tell me if there is a fix for the USB driver of the phone for it to recognize that is connected.
My office is starting to use the curves as work phones, running from a BES server.When I plug in a USB cable to the curve to charge it all the connections to the network are disabled. I have checked out the charge on the battery i.e. is it below 5-10% charge, when i believe everything gets disabled to save the battery.Policies have been applied to the curve, one of which is to disable connection to pc's, could this be having an affect does anyone know?
View 1 Replies View RelatedMy Blackberry Curve 8530 desktop software will recognize photos on the media card in it, but it will not recognize videos. I can watch the video on the phone, but it doesn't show up in the desktop software.
View 2 Replies View RelatedI have blackberry curve 8310 and it has not been used for a little while. I just recently decided that I wanted to use it again however when I plugged it in i am getting a symbol of a battery with a red slash through it??? It has now been plugged in for a few hours but nothing has changed
View 3 Replies View RelatedHad to replace the SIM card on my Curve 9360 today and now it won't recognize my BlackBerry ID or password. It just says "please wait" and then does nothing for literally hours. I can log in to the BlackBerry website fine so I know my login and password are correct. My cell phone provider says it is a BlackBerry issue. The log in screen gives you 10 tries to log in before it wipes your phone and I'm on try #8.
View 2 Replies View RelatedI'm trying to connect my phone to my computer for the first time, and I'm not having any luck. I've tried my computer and my boyfriend's computer, and it doesn't work on either.When I plug it in to the USB, it charges, so I don't think it's a problem with the cord.The troubleshooting portion of the BlackBerry desktop manager isn't much help, as I don't know how to do?
View 1 Replies View RelatedI have a Windows 7 PC (64 bits). I have installed today the BB Desktop SW version 6.1.0.36 from BB website.It works fine with my old BB Curve 8900 palm phone, but does not recognize at all my newest BB Curve 9360 palm phone.In particular when I connect the BB device with the microUSB cable to the USB port of the PC, Windows 7 complains to have not installed properly the Device Driver of the BB palm phone.If I look at the PC Device Drivers Management I can see a BlacBerry driver version 4.2.0.14 of 23/06/2011 from research Un Motion.Windows complain that the device type is unknown, all what it says is "Reinstall the drivers for this device. (Code 18)".
View 1 Replies View RelatedI have my backup files. But my computer does not recognize my device due hardware problems. Is there any way to upload my backup files without using desktop manager? I should have use blackberry protect in hindsight.
View 2 Replies View Relatedi set a password to unlock my bb device. Three days ago a friend took the bb and tried to discover the password, he tried 8 times. After i tried to unlock the device inserting the right password but it dosen't recognize it. Now i'm so worried about lost all my data, casue i haven't done recently a backup. I hope someone would help me cause i have a lot of data in it and i cannot loose them. The one who tried to unlock the device said that after the 5th attempt he was asked to write blackberry, and now in place of asteriks there appears like normal characters.
View 1 Replies View RelatedSituation: My internet stopped working one day. So I took it to the Sprint store, they said it need a software update.Internet works fine now, but now my computer doesnt recognize it as a moble device. It recognizes it as a removable disk but an unaccessable one. PC drivers or phone drivers?http://i306.photobucket.com/albums/nn270/barto8/phone.png
View 8 Replies View RelatedAbout two months ago I bought the Blackberry Curve 3G from Amazon. I bought it unlocked so that when I go back home (I'm from Holland and I'm currently in the US for a year) I can take it with me and use my old sim card. The phone worked fine up until last week; the battery died and when I turned it on as it was charging, I got a message saying the sim card was not available. I turned the phone off again, unplugged it and opened it to see if the sim card was properly inserted. It looked fine so I turned the phone back on: same thing. I've been very careful with my phone, never dropped it, never got wet etc so that can't be it.
It's not the sim card because I tried to put in a different card and that didn't work either. When I tried those two cards in a different phone, they did work.
I contacted Amazon and the company that I bought it from; they told me to contact Blackberry. What can I do??
I have been successfully connecting my 8330 to a desktop PC running XP for quite a while. The device sw is v4.5.0.175. I recently got a new Lenovo T410 laptop, running Windows 7. I have downloaded the DM software (v5.0.1) and verified that my device SW is up-to-date, but the laptop is still not recognizing that the device is connected (via USB). I've tried it in all the USB ports on the laptop, and also followed all the steps detailed in KB13146, with no luck. I can't find anything in any of the forums that reference Windows 7.
View 4 Replies View RelatedMy computer doesn't detect my BB , When I try to open the memory card from my computer there is no icon for it.I tried to take the battery out for one minute, but it didn't work , the USB cable is working fine because every time that I connect the usb cable to my computer , a clock shows on my Blackberry screen .
View 1 Replies View RelatedDevice info Your carrier: Cincinnati Bell Model info and OS version (Go to Settings, then Options, then about): 8520 v4.6.1.286 (Platform 4.2.0.122)Apps and free space File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 97842197 Bytes Did a battery pull fix your issue? Have not tried Apps installed and their version if possible.(Go to Settings, then Options, then applications):BT device model/version (you will have to look at the BT device):Rhapsody v4.0 does not recognize the BB in the sources list. Therefore, I cannot transfer music to my BB. Contacted Rhapsody technical support. Tried:
1. Turning Mass Storage Mode Support OFF
2. Checked what shows up under Control Panel - Device Manager (I'm on Windows 7): Under Portable Devices, shows "E:" (I believe this is the media card that's installed in the BB. Under USB controllers, shows "BlackBerry Smartphone".
3. Launching Rhapsody in "Run as administrator" mode.
4. BB shows up under my Computer only if I turn Mass Storage Mode Support ON. Shows up as removable disk (E:). If Mass Storage Mode Support is OFF, nothing shows up under my Computer.After all above steps, Rhapsody tech recommended I contact the device vendor to troubleshoot and to update the firmware of my device driver. Checked for updates using Desktop Manager and it says no updates are needed.
I have a new laptop with Windows 7. Whenever I plug in my BB to the computer, the BB desktop software starts up & says " connect your blackberry device". When I troubleshoot, nothing has helped. I have tried downloading drivers & reloading the software.
View 2 Replies View RelatedIm getting error 507 but my pc wont recognise the phones USB so i cant connect it?
All i get it a red light come on when i plug it in then nothing happens and thats it.
I have been successfully connecting my 8330 to a desktop PC running XP for quite a while. The device sw is v4.5.0.175. I recently got a new Lenovo T410 laptop, running Windows 7. I have downloaded the DM software (v5.0.1) and verified that my device SW is up-to-date, but the laptop is still not recognizing that the device is connected (via USB). I've tried it in all the USB ports on the laptop, and also followed all the steps detailed in KB13146, with no luck. I can't find anything in any of the forums that reference Windows 7. Can anyone provide help to resolve this problem?
View 4 Replies View RelatedSituation: My internet stopped working one day. So I took it to the Sprint store, they said it need a software update. Internet works fine now, but now my computer doesnt recognize it as a moble device. It recognizes it as a removable disk but an unaccessable one. PC drivers or phone drivers?
http://i306.photobucket.com/albums/nn270/barto8/phone.png
i cant recognize in my blackberry 8520 any media card.
View 3 Replies View Relatedmy bb 8320 cannot recognize my 2gb memory card.it says "a media card is not presently inserted in the device" and i can't format it either coz it cannot read my media card.
View 1 Replies View Related