BB Curve :: 9300 3g Screen Not Working But Keypads Are Lighting Up / Red Light Is Flashing
Jul 18, 2011
my blackberry 9300 3g screen isnt working but keypads are lighting up and red light is flashing but i kept on charge then it lit up and the screen went on but was flickering but then the phone turned off i have looked on the internet and thought it was somthing to do with the dust but i dont know?
i have only had my blackberry for a few months, i tried installing an update last night and it said it needed to reboot, i clicked ok and now i have a black screen with a red flashing light, i have put the phone on charge, it won't turn on or connect to the computor
Can't seem to find in the options how to enable the lighting for the keypad of my BB Curve 9300 3G model. Can't type anything in the dark because i can't see the keypad due to absence of back lighting.
When putting in my battery, my phone wont turn on, it comes up with a red light but no loading screen comes on. However this morning the loading screen did come on but 5 minutes later a white screen came up
I am on a curve 8310 I think it is with an annoying flashing blue light. I think it's a cross between a white and blue as it's a pale blue light. I have turned off every notification I can find, email, text, facebook etc. I have deselected the LED option ( changed to none) I cannot figure how WHY this light keeps blinking. I've taken the battery out, i'm at my wits end.
i was using my ohone normally one second, bbming and then the next second the screen starts to flicker and goes white. i tried removing the battery and everything but it wont even show a screen when it turns on, as soon i out the attery back in a red LED light shows on the front. what can i do? i really need it ti start working again
Today my touch screen on my bb torch 9800 wouldnt work, I did a battery pull and now my phone wont switch back on. the screen is black and there is a red flashing light.
i have a torch 9800 .....after putting the battery in it boots up gives me the att screen then operates for 5-15 minutes then goes black screen with the led flashing red. how can i solve this issue to operate device
i just got the galaxy s6 edge i noticed i keep getting the flashing blue LED light when my screen is off even though i am not received any text, emails or any notification on my phone. it just keeps flashing. how do i turn this off? I have gone into settings>sounds and notifications> led indicator and turned it off but it still flashes.
i have may bold 9000 for awhile now but all of a sudden it does not turn on any more. screen blank and the LED light flashing four times. i cannot wipe the phone because i cannot access my bold via the USB port. i'm geting frustrated and i dont know what to do.
I recently upgraded to a bold through Orange (UK Network Provider), phone has been great so far, I have had it for a week. However, I made a call and came back to my phone to find a blank screen and the red light flashing/staying constant intermittently. The phone does not turn on, I have tried taking battery out, sim out, memory card out, attaching it to my computer (which it does not recognize as it needs to be on) charging it etc. I have tried that alt, cap and del reset mechanism too.
Orange told me I will have to send it off this week, but does anyone know any quick fix to turn it on? I have all my contacts on there, stupidly I did not back it up.
My sony Xperia z3 has the notification light flashing blue, but the screen wont turn on. Ive tried plugging the charger in, using the wireless charger, I even had ny husband call my phone and the screen never lit up and the phone never rang. Ive held down the power button, ive held the power and vol up button and still nothing.
Sony xperia s not turning on, only green notification light blinking? - The phone was on the charge throughout the night, in the morning phone`s ot switching ON, despite of pressing the power button for some time.
My curve randomly turned itself off the other day. I went to power it back on with no luck. I decided to charge it and was still unable to turn it on. There is a flashing red light, 1 flash followed by 3 flashes.
Okay so my blackberry curve 3G is relatively new, around 10 months. And today it was working fine, decent charge on the battery, when it decided to crash. I left it alone, and it still wouldnt respond. So i took the battery out, left it for 5 minutes, and put it back in. Usually, it automatically starts up, but this time there was no response. When i tried to turn it on, the screen stayed black, but the light in the corner came on red, for roughly 10 seconds, then turned off, and began to flash for around 3 seconds, every 10 seconds. ive tried plugging it into the computer, however it cannot pick it up, and if i try to install older software (downgrade it, which it recommends to do) it fails just before the end, every time.
I have a Blackberry Curve 8520 and yesterday update Blackberry Apps World, it popped up saying it had to be rebooted so i did this, the phone has not turned on since and has a red flashing light?!! It also will not connect to any computer, the computer will not acknowledge a connecton!
I have charged it all night, pulled the battery, tried a new battery!
My Curve 8520 will not switch on today and the red message indicator light flashes once then rapidly 4 times then stops for a few secs then starts again. It looks like a morse code signal.
I am a new BB owner and I set my LED backlight to 30 seconds, however it keeps coming back on, even after I have pressed the Mute button to lock the screen.
I've got a Nokia 6220 Classic and over the past few weeks, certain keypads have started acting strangely. Firstly it was the [7] key. When I pressed the keypad nothing happened so I hit it a few more times and eventually the number came up. As time went by, the problem spread to [1], [4] and [*/+] until finally none of them react at all anymore. As a result, I can turn the phone on but I can't enter my pin-code to access the menu etc.I'm at my wits end and am just wondering if anyone has any words of advice that might help me. I've obtained an early exit fee from my service provider so now I just need to find out if it's going to cost more to fix at a Nokia Care Center.
When I'm trying to power on the phone, I get the initial black and white "Samsung Galaxy S6" screen. Then everything goes black and the blue LED on the top left lights up and stays on, does not flash or dim, just stays on. The phone does not vibrate or make any sound when it does this.
What I've tried to fix it:
1) Power + Volume down (maintenance boot mode) ... I've tried normal boot, factory reset and booting in safe mode, all just give me a black screen with the blue LED.
2) Power + Volume Up + Home (andoid system recovery screen) ... When doing this, the phone displays the black and white "Samsung Galaxy S6" screen, followed by a bluish colored screen with a little android guy on it, followed by the dead android guy with a yellow exclamation triangle over his head, then goes into the android system recovery menu. On this screen I can wipe data/factory reset and wipe cache partition and reboot and I still get a black screen with a steady blue LED.
3) Power + Volume Down + Home followed by Volume Up (Downloading screen) ... Takes me to the bluish screen warning me about downloading a custom OS. After hitting up it does not show the knox has ever been triggered. I've tried using ODIN 3.10.6 to reinstall fresh firmware (5.1.1 G920VVRU3BOG5) and after it successfully installs it, it boots to a black screen with the steady blue LED.
Unfortunately my BB9900 past away. Black screen, Red light flashy and all the same symptoms in previous other posts. I have tried:
- Batt pull - Chargin with Power cable and/or USB cable and pull the batt in / out - Installing software - Resetting with BBSAK and JL CMDer
All without any result. Only thing is: When I pull the battery and connect it with my PC, after 30s/60s I see a battery (with a red cross) in the screen. I have tried now to install the software trough "c:program filescommon files esearch in motionapploaderloader.exe" /nojvm but no luck. Is it possible to connect with other software? Where can we download software to Flash the Rom and are their any ROMS available? My guess is a software failure in the ROM.
I have a curve 8900 that won't turn of suddenly after I got the battery out and then put it back.The red light is flashing and the screen is black. It is also can not connect to the BB Desktop. When I tried to update the phone to be able to connect it the update is stick when it is trying to initialize the phone.
My curve randomly turned itself off the other day. I went to power it back on with no luck. I decided to charge it and was still unable to turn it on. There is a flashing red light, 1 flash followed by 3 flashes.