BB Bold 9700 :: Triggered Snooze Escalating Mode Doesn't
Jan 6, 2010
I have noticed since switching to my 9700, only one key works to activate snooze. (.....makes for some challenging fumbling in the morning, which has yet to land my bb in my נעגל וואסער) Previously touching any key triggered snooze Escalating mode doesn't seem to escalate! That was a good feature. Has anyone else noticed this? Are they bugs or am I missing something. Or perhaps something became corrupted when I transferred settings from my 9000.
View 14 Replies
ADVERTISEMENT
Mar 28, 2010
just updated to .545 and now i have no standby mode. also when i lock my device, before i needed a password to unlock but now it unlocks without having to enter a password.
View 14 Replies
View Related
Jun 15, 2010
I have a Bold 9000 that started out with the original Rogers operating system some time in 2008. I've upgraded it through various 4.6 (or is it 4.7?) OS versions and I'm now on 5.0.0.662 (I haven't gone to .681 yet mostly because I keep forgetting). On every single version of 5.0 I've tried (Wind, Azercell, etc) I have run into two problems.
1. The camera takes pictures that are way too bright when using the flash. It's like it doesn't reduce the exposure time when the flash is on - almost every flash picture is totally white. This happens in auto flash and when you force the flash on. Pictures without the flash work the way you'd expect them to.
2. I can't snooze the alarm using a side key while it's in the holster any more. The alarm ringtone starts playing, I press the volume up or down key while the phone is still in the holster. On OS 4.6, this would cause the alarm to snooze for ten minutes. On OS 5.0 it just restarts the alarm sound! Totally pointless. This is especially annoying for me as I need to take pills on a 12 hour basis and so I have alarms going off at least twice a day, every day.
View 5 Replies
View Related
Dec 22, 2011
since the update to Sense 3.0, my alarm cannot be snoozed anymore.I go to sleep, alarm goes off, and i get 2 options: snooze or cancel. (dont know exact options in English, got other language). I choose snooze, for 10minutes, I have this options enabled. and I see the Snooze screen for 2 seconds, and then it disappears.The clock is also not in upper bar on phone screen, its just cancelled. When I want to reproduce this problem, I try this when the phone is on, not on standby, it works!! I get the snooze screen. But when im asleep the phone is ofcourse on standby modus, or at least the display is off. Then it doenst work.
Android 2.3.5
HTC Sense 3.0
Software nr: 3.13.161.3
View 1 Replies
View Related
Nov 1, 2011
i got a problem, my blackberry 9930 show me white screen and error 102, cause a few days ago, i uninstall a application, and after ask me reboot, starts showing the problem, i try to starts safe mode, i just press escape key when goes out the red led, and just starts normally and allways shows Error 102.
View 1 Replies
View Related
Aug 20, 2010
What exactly is "bedside mode" and is there a way to disable the clock from showing up when I plug up my phone?
View 4 Replies
View Related
Jan 18, 2010
What is bedside mode? Is there a way that when i charge the phone, the screen goes blank? Don't really want the clock on my screen. Also, it seems like only sometimes does my email icon on my phone get the little read dot that indicates a new email. Some times it does, some times it doesn't. Also, my fiance has a bold as well, and I tried to text her this morning. I went to compose SMS, but it going out as a BB messenger conversation instead.
View 8 Replies
View Related
Nov 30, 2011
I need an app or solution to remind me by sound every 14 minutes and then by snoozing it after 14 minutes again and again. How can I manage this?
Is there an app which can manage this or a function in the bb bold 9000?
View 1 Replies
View Related
Jun 28, 2010
My BIS stops working every time my Network mode is 3G. (or 3G & 2G)the little BB symbol just disappears, internet, BBM & email will not work.As soon as I put my phone in to 2G mode everything starts to work.I'm on Three UK network witch is 3G by default.is this a common problem with the 9700? or does my phone need looking at?
View 5 Replies
View Related
May 9, 2010
is there such a thing as RESTART IN SAFE MODE in our 9700? to trouble a boot up problem, would have been a nice feature in the OS.
View 6 Replies
View Related
Jan 26, 2010
Where can I find the settings for standy mode? my phone does not go into standby mode anymore when i pout it into the holster, i know there was a setting but i cant find it anymore.
View 6 Replies
View Related
Sep 6, 2011
I have recently installed OS 6 on my Bold 9700, but it keeps on going into waiting mode (small clock face on screen). I have tried deleting programs that I don't need, but haven't solved the problem.
View 2 Replies
View Related
Jul 10, 2011
I have bold 9700 running os6 but I want to get back my 2g only option in mobile network options. I use BB 9700 of H3G UK. In OS5, it has 2g mode, 3g mode and 2g&3g mode but there is no 2g mode in Mobile network option in OS6. I have tried to reinstall OS6 and nothing change.
Is there a better way to do get the 2g only option back?? Don't tell me that I have to downgrade to OS5
View 3 Replies
View Related
Jan 7, 2010
Does the alarm ring while in bedside mode?
View 9 Replies
View Related
Apr 13, 2010
When I put it into bedside mode and on silent it still vibrates. What am I doing wrong?
View 14 Replies
View Related
Jan 16, 2010
Anyone know if it is possible to have the screen fade off during bedside mode? I like the auto profile and LED off feature but I would like the screen to go off when I'm charging on the cradle at night. I'm a little paranoid of having the screen on all night every night when it is on bedside mode.
View 14 Replies
View Related
Jul 30, 2010
I just updated the latest software to my bb 9700, upon undating i notice that the "key lock" key and the "standy key" located on top of the phone is not functioning anymore. is that any ways that I can i activate back both the keys? or how do i lock my phone with your latest software.
View 5 Replies
View Related
Jun 23, 2010
Why the standby mode button doesnt work on my Blackberry Bold 9700. I have OS v5.0.0.593
View 5 Replies
View Related
Sep 8, 2010
I have read about 30 posts on this subject and no one seems to be answering this question about the recently revised change of the "standby button/mute key" change. I do not holster my 9700, so a TRUE standby button is very helpful. A few posts indicate that the key lock button (left button of top of unit) is the same thing as Standby mode. IT IS NOT THE SAME THING! Keyboard lock has nothing to do with putting the phone into a lower power state. With that, does anyone know if there a button or process to put the phone into true Standby mode (other than by holstering the phone)?
View 7 Replies
View Related
Jun 6, 2010
After doing some backups and so, yesterday I started the sofware, conected the 9700 but the situation is different. Desktop appears gray, it recognizes my phone PIN and model, but it doesnt works. It appears freeze. Also the phone icons appears freezed. Shows the PC and the phone, but none moves. I tried with other PC, but the situations remains similar. What is happening?
View 6 Replies
View Related
Aug 12, 2012
When i try to switch on my celphone ....sometimes it switches on but the buttons doesnt work..
But sometimes it doesnt turn on.....the loader stops in the middle of the loader..
View 1 Replies
View Related
Jan 12, 2010
I have the device set up for "Bedside Mode" when charging (sits in the OEM dock at night). I left the device "on" and placed in the dock. The keyboard light, screen all dim as they should and the "clock" displays on screen as well. Then after about 20 sec the keyboard buttons all turn on and the screen brightens up. A couple of sec's later they all dim back down. This process repeats itself over and over like the damn thing has a heartbeat or something! I don't recall this doing this the first two nights that I used the new dock/bedside mode.
View 14 Replies
View Related
Aug 8, 2010
When connecting my BB 9700 to my Windows 7 PC via USB I used to be able to select the option on the 9700 of using it as a Mass Storage Device and then navigate it on my Windows 7 PC.Now, for some strange reason, even after agreeing to use it as a Mass Storage Device, it doesn't show within Windows 7 Explorer.
View 14 Replies
View Related
Feb 15, 2010
I put the phone in bedside mode then drop it in the cradle and when I wake up the clock is gone and the phone is frozen. It won't let you do anything not even shut it off, I have to do a battery pull.
View 6 Replies
View Related
Jan 6, 2010
This is driving me nuts. In setting up my profiles, it looks like there are even more options then there were on my 8320. When in 'vibrate' mode, I want my phone to vibrate ONLY, whether to notify me of a phone call, instant msg, email, sms, whatever. But, when my phone is in the holster, it will vibrate and then ping with a sound alert. I was awakened at 4am this morning because my phone was in the holster on vibrate on my dresser and an email came in.I've checked my settings a dozen times and can't figure out how to get it to NOT ping. The settings for 'play sound' are only 'in holster', 'out of holster', and 'always'. There's no 'never' option.
View 5 Replies
View Related
Jan 6, 2010
Ive had my phone on the charging pod and it automatically turns on bedside mode dimming the screen but leaving it on for as long as it sits there. However, when i manually go to the clock and turn on bedside mode it dims and after the preset time i have for the display to turn off it turns off. Is there a way to always keep the screen on while in bedside mode but not on a charging pod?
View 10 Replies
View Related
Aug 21, 2012
I have a problem with my Blackberry 9700 and it has a message of App Error 200. I try to reboot it to safe mode but it wouldn't work, I'm trying to delete third party application I used to download in the internet but my phone stop working. I try also to update the software but the problem is the memory is full, I cannot delete the applications to free the memory because the phone stop working and in the screen you will only see app error 200. My device model is Blackberry 9700 PIN: 21F447D0 OS:5.0 Bundle 726 (v5.0.0.442 Platform 5.1.0.121)
View 3 Replies
View Related
Mar 23, 2010
for some reason the alarm does not work (properly) it did not sound yesterday at all, I tried it in the evening, same thing. It shows the option to snooze & dismiss, but it does not sound... this morning, I had it set for 7.30, the alarm went off at 7.35 - any ideas what's wrong?
View 9 Replies
View Related
Jan 19, 2010
My blackberry messenger doasn't seem to be working, when i add someone or they add me it just says pending and nothing else happens.
View 5 Replies
View Related
Aug 5, 2010
I have a PC with windows vista and one for w7, they both have the same problem.Downloaded the divice driver than the device manager but when connet the two device it sais does not have divce softwear and keep on asking for CD - which of course never comes with it. So can not connet the two.
How can I fix this problem.
View 4 Replies
View Related
Sep 9, 2012
The app. doen't recognize my blackberry 9700.Also when I connect to the USB only the first time the desktop opens if I try again it will not open untill I reboot the computer.
View 2 Replies
View Related
