After I updated my Xperia Z3 to 5.1.1, connecting to the wi.fi became a problem. The mobile doesn't connect automatically to my wi.fi. It shows the there is an authenticating problem. It connects after several times of trying. What should I do expect for software repair???
View 9 Replies
after upfating to 5.1.1 if i disable the wifi, mobile data doesn't switch on it doesn't happen everytime but most of the time. on previous updates it was fine.
View 9 Replies View RelatedWe've just had our virginmedia set top tv hard drive replaced and I can no longer contact with my iPhone 3, although there is no problem with my wife's Samsung mobile, or our Windows laptop.
Have reset router and tried to switch cellular data off and changed to the static setting without joy.
Info:
iPhone 3G
I have to manually connect to all wifi connections, even when I am at the office or at work. The wifi entry is saved, so no need to enter password, just have to click on it everytime. I already tried deleting the entry and re-entering them, no luck.
View 3 Replies View RelatedMobile data having priority over wifi in some scenarios on Z5 Compact?
Phone is fully charged. None of the power saving options are enabled. Keep wifi on during sleep is enabled.
Phone is somewhere away from wifi in use with mobile data.
Phone becomes in range of a known wifi device whilst not in use.
After any amount of time, phone is used.
Mobile data is still in use and wifi is only switched to at the point the screen turns on.
Nokia E6 with Symbian Belle Refresh which I bought just a couple of days ago.It does not detect wifi internet connections at all, although they are available. When I go to settings -> connectivity and then select wifi, it searches connection for a while and then shows that none are found. Meanwhile, my old Nokia E72 remains connected to my home wifi without any problem... I am really surprised and disappointed. Also when I try to set up the connection manually, it doesn't work at all.I can't believe that such a device is being sold, a wifi connection is something extremely necessary nowadays in a smartphone. I was so attached to Nokia but I feel like it is my last Nokia phone because this is just unbelievable
View 5 Replies View RelatedSometimes it does, sometimes it doesn't. Often my iPhone doesn't pick up wifi when I come into a wi-fi zone and stays on GPRS until I go into setting, wifi and then it picks up the network. Sometimes it does it automatically but it's annoying when it doesn't. It sometimes does the same with network signal if you go into a 'No Service' area and then come out of it it often takes a long time to pick up the network signal again.
Info:
iOS 5, MMS, iPhone 4S
I have a 8510 Curve and use 3G most day, but I want it to automatically connect to Wifi when I am at home, and disconnect 3G. How can I do it?
View 1 Replies View RelatedWhen I'm at home my iPhone 4s will not connect to my wifi automatically I have to enter the password every time it's only started doing this but as soon as I'm away from home it goes to 3G then once get home should connect to wifi but doesn't even if I put password in then turn airplane mode on it wouldn't reconnect to wifii would have to enter password again
Info:iPhone 4S, iOS 5.1
after I update my Iphone 4 to 5.1.1 I can't connect to the wifi automatically. All the time when I turn off the wifi from the phone I need to type the wifi code again.
Info:
iPhone 4, iOS 5.1.1
I have a Nokia N97, which having a mobile Internet connection, which I only want to use when I'm not near my different wifi network. But it does not connect automatically, and it always selects my mobile connection, why?
View 6 Replies View RelatedHow do i make N97 mini connect to wi-fi automatically when i'm at home and packet network (3G etc.) when no wi-fi is available? Also how to make it prompt before connecting to packet network, as i get charged for it?
This phone has got a mind of its own at the moment, Facebook widget tries to connect to packet network even when an existing wi-fi connection is extablished (and spotify is using it). I get a beep every time it fails.
In fact ALL widgets try to establish a packet connection when there's no need and i simply cannot change any settings to make this device work sanely.
there seem to be a bug that I dont seem to be able to find out how to fix, the problem is that i dont want the phone to connect to a wifi network everytime it recognizes one, basically i have few prefered wifis that i use, but i do not want the phone to connect to them automatically. what i already tried is disabled wifi scanning, filtered out those networks that i dont want it to connect to automatically - still no luck. What i wouldnt like to do is delete the networks to enter the password everytime i want to connect...isnt there an easier way around, at least for the phione to ask before connecting to the wifi...
View 2 Replies View Relatedmy mobile wifi is not connect in my cell phone.. My mobile model number is Curve 8520.
View 1 Replies View Relatedwhy does my phone automatically connect to my wifi when i go to my hotmail account which means i cannot get my emails whilst outside and i get no alerts for new emails
View 1 Replies View RelatedI can not get my galaxy s5 to automatically connect to 4G after being connected to wifi, the smart network switch is activated however it doesn't make any difference. the only way for me to reconnect to my network is to restart the device.
View 1 Replies View RelatedI'm a new android user. The problem I'm having is that when my wifi drops out or if I come home the Internet on my phone does not switch back from mobile data to wifi. I'm with bigpond and I have put the password into my phone and I don't need to put the password in each time but when I go to wifi settings it says sign in required and I press connect and the wifi turns on. As soon as I come home or the Internet drops out it switched back to 3G and doesn't connect back to wifi unless I do what I mentioned above.
The advanced setting on the wifi are
Proxy-none
Ip settings DHCP
Signal strength- very strong
Security wpa2 psk
I also have the smart network switch toggled to off. I have reset my telstra router.
I've wasted a lot of my mobile data this week before I realised that when I left the house or the net dropped out my phone was staying on 3G and not switching back to wifi the way my iPhone and every other phone I've owned did.
How can I make WiFi connect automatically to my router why do I have to tell it to connect every time I can not see any auto settings Also seems to drop off after about 30 Min is this power save?
View 2 Replies View RelatedWhen I try to access web sites from the Blackberry browser I get the "Unable to connect to the selected mobile data service. Please try again later" message. This happens whether connected through the T-Mobile network or Wi-fi.When I change the browser settings to the T-Mobile browser I am able to access web site just fine. However I would prefer to use the Blackberry browser because not all pages load correctly with the T-Mobile browser.
I have an active data plan and am connected to an enterprise server. My outlook and webmail e-mails work so I don't think it's a problem with my carrier. I've tried a battery pull, re-sending my service books, etc without luck.I think the problem may have started after connecting to my desktop for the first time in about a year, but I'm not completely certain. T-Mobile support and IT administrator have been no help.
Since updating to lollipop i have had no mobile signal and the nfc icon keeps switching on and off. I have tried to hard reset my phone as will as factory reset and even reinstalled the firmware but to no avail. Tried putting another sim card in and still not working. everything was working fine on kitkat.
View 7 Replies View RelatedMy wife and I both have 2014 Moto Xs on AT&T, roughly 3 weeks old. My phone is 100% great, however her phone will only connect to Wifi networks if mobile data is turned off.
I've tried everything, and can't get it to work correctly. It will either show the list of networks associated with the device with the word "disabled" under the most recent network, or be stuck on the blank "Searching for Wi-Fi networks..." screen.
My phone doesn't automatically connect to wifi when mobile data is on. I have been searching for a fix or setting since.I have ATT. My whole family has ATT. The kids both have 1st gen Moto X and my husband has Samsung, none of them have this issue and I believe we are all running the same android version.I have done lots of different things I have found along the way during my search for a fix but nothing has worked.
I can tell you that if I shut my mobile off and turn my Wifi on it will connect then I can turn my mobile back on and it will stay that way until I go out of my wifi range and the mobile kicks on then when I return to wifi range it won't connect. If I try to connect it will say disabled. That is when I turn off mobile, turn on wifi and then go back and turn mobile on again. If my mobile is off and I go out of wifi range it will connect back just fine, the issue seems to be only when mobile is ON.
I would like to be able to leave mobile on so I can receive MMS. But this is a pain because sometimes I forget that wifi didn't connect or I forget to go back in and turn mobile on and miss a lot of group texts, iphone long texts that come as MMS and pic texts until I turn my mobile on which sometimes could be days.
My phone will no longer automatically connect to saved WiFi networks. It knows they're there, because if I go to Settings -> WiFi, it shows up in the list as a "saved" one. Tapping on it and selecting "connect" does nothing. I have to turn off the WiFi and turn it back on, and it will then automatically connect.
Additionally, WiFi will not stay off. If I'm some place I don't want it to connect to WiFi, I turn it off so that I don't get messages that networks are available (specifically when I'm driving, it's really annoying to deal with that over Waze).
I've got a Sprint GS5, running stock (not rooted), on 5.0. No updates available for the phone. It does this on every WiFi network I have saved (home, school, and school apartment, among others). I've also tried turning Smart Switch off and on, it makes no difference for either issue.
I have a really weird issue with my brand new G3. I started configuring the device without a SIM, and it saw my 5G (802.11AC) home network (Netgear R7000 router).
I was working with this connection and everything was great. I done all my software updates (maybe 8 of them) from the initial store 4.4.2 to 5.0. The phone now say that I have the latest version.
When I inserted my SIM card the phone stopped discovering ("seeing") the 5G WIFI network, it now sees only my 2.4G network.no matter what I've done, it wont discover the network it worked with before the SIM insertion and start up.
I also recall that I had more settings in my Advanced WIFI screen, and at least 2 settings which I remember are now missing. One if the setting which switches to cellular DATA when the WIFI signal is weak, and the other when the WIFI network doesn't have an internet connection. There might be more settings which I'm now missing, but I recall these two to now be missing from the Advanced WIFI screen.
Taking the SIM card out doesn't solve this. The only way I've managed to restore the 5G connectivity is by doing a factory reset. BUT, inserted the SIM card ruins it again!
The attached pictures shows how it looks when it's connected to the 2.4G network, and the missing settings:
my Iphone as the question says is 4s and it has the 8.1.1 software and it used to connect to wi-fi but suddenly it stopped and when i try in the fast access menu, the button was dark gray and it doesn't allow me to get connected....why? pd: it doesn't allow me in settings either
Info:
iPhone 4S, iOS 8.1.1
I have xperia z2, updated with software build number 17.1.2.A.0.314.My screen doesnt lock autimatically ... I have to always lock it manually by pressing power button.In settings i set display-> sleep -> 15 seconds.And security -> automatically lock -> immediately after sleep.
View 7 Replies View Relatedafter installing Gingerbread, my mobile browsing (internet) doesn't work anymore! I can only go on Wifi to connect online, which is REALLY bothersome!'ve tried airplane mode, selecting networks (only one to select from) and SIM pull
View 5 Replies View RelatedWhen I switch on my X10 , it does not automatically connect to my operator. I have to scan and then connect to operator everytime.. "Automatically connect to selected operator" (or sth like that) is chosen but still no way im connected to my operator on startup. And it is not related to my operator. When i try to use other operator, still the same..
View 2 Replies View RelatedI have a DROID 3 with Android 2.3.4. I work on a college campus and am mobile a good bit, so I am usually bouncing between Wifi and 3G. I have noticed that when I am listening to music on my BlueTooth the Wifi will scan, Obtain IP Address and flip back to scan, obtain IP address then turn Wifi OFF entirely.
If I am not listening to music over Wifi, even when I use a physical 2.5mm plug listening to the same service "google music" it connects fine every time.
I turn my 'data access via mobile network' on, but nothing happens and I get NO internet connection. There is no problem with my provider, and my wifi at home still works. I 've had this problem yesterday and now after downloading the new version of android, the problem is still here.
View 9 Replies View RelatedI paired my z3 with the bluetooth device of my Land Rover. The first time, the z3 ask me the security code that I wrote and all was good.
The system of my car didn't ask a code cause for the Land Rover the code is 2121 for each device. But I must write the code each time that I'm getting in my car. Other devices is connecting automatically after a first paring but with my z3 not.
