after I update my Iphone 4 to 5.1.1 I can't connect to the wifi automatically. All the time when I turn off the wifi from the phone I need to type the wifi code again.
Info:
iPhone 4, iOS 5.1.1
When I'm at home my iPhone 4s will not connect to my wifi automatically I have to enter the password every time it's only started doing this but as soon as I'm away from home it goes to 3G then once get home should connect to wifi but doesn't even if I put password in then turn airplane mode on it wouldn't reconnect to wifii would have to enter password again
Info:iPhone 4S, iOS 5.1
I have a 8510 Curve and use 3G most day, but I want it to automatically connect to Wifi when I am at home, and disconnect 3G. How can I do it?
View 1 Replies View RelatedI have a Nokia N97, which having a mobile Internet connection, which I only want to use when I'm not near my different wifi network. But it does not connect automatically, and it always selects my mobile connection, why?
View 6 Replies View RelatedHow do i make N97 mini connect to wi-fi automatically when i'm at home and packet network (3G etc.) when no wi-fi is available? Also how to make it prompt before connecting to packet network, as i get charged for it?
This phone has got a mind of its own at the moment, Facebook widget tries to connect to packet network even when an existing wi-fi connection is extablished (and spotify is using it). I get a beep every time it fails.
In fact ALL widgets try to establish a packet connection when there's no need and i simply cannot change any settings to make this device work sanely.
there seem to be a bug that I dont seem to be able to find out how to fix, the problem is that i dont want the phone to connect to a wifi network everytime it recognizes one, basically i have few prefered wifis that i use, but i do not want the phone to connect to them automatically. what i already tried is disabled wifi scanning, filtered out those networks that i dont want it to connect to automatically - still no luck. What i wouldnt like to do is delete the networks to enter the password everytime i want to connect...isnt there an easier way around, at least for the phione to ask before connecting to the wifi...
View 2 Replies View Relatedwhy does my phone automatically connect to my wifi when i go to my hotmail account which means i cannot get my emails whilst outside and i get no alerts for new emails
View 1 Replies View RelatedAfter I updated my Xperia Z3 to 5.1.1, connecting to the wi.fi became a problem. The mobile doesn't connect automatically to my wi.fi. It shows the there is an authenticating problem. It connects after several times of trying. What should I do expect for software repair???
View 9 Replies View RelatedI have to manually connect to all wifi connections, even when I am at the office or at work. The wifi entry is saved, so no need to enter password, just have to click on it everytime. I already tried deleting the entry and re-entering them, no luck.Â
View 3 Replies View RelatedI can not get my galaxy s5 to automatically connect to 4G after being connected to wifi, the smart network switch is activated however it doesn't make any difference. the only way for me to reconnect to my network is to restart the device.
View 1 Replies View RelatedI'm a new android user. The problem I'm having is that when my wifi drops out or if I come home the Internet on my phone does not switch back from mobile data to wifi. I'm with bigpond and I have put the password into my phone and I don't need to put the password in each time but when I go to wifi settings it says sign in required and I press connect and the wifi turns on. As soon as I come home or the Internet drops out it switched back to 3G and doesn't connect back to wifi unless I do what I mentioned above.
The advanced setting on the wifi are
Proxy-none
Ip settings DHCP
Signal strength- very strong
Security wpa2 psk
I also have the smart network switch toggled to off. I have reset my telstra router.
I've wasted a lot of my mobile data this week before I realised that when I left the house or the net dropped out my phone was staying on 3G and not switching back to wifi the way my iPhone and every other phone I've owned did.
How can I make WiFi connect automatically to my router why do I have to tell it to connect every time I can not see any auto settings Also seems to drop off after about 30 Min is this power save?
View 2 Replies View RelatedMy phone will no longer automatically connect to saved WiFi networks. It knows they're there, because if I go to Settings -> WiFi, it shows up in the list as a "saved" one. Tapping on it and selecting "connect" does nothing. I have to turn off the WiFi and turn it back on, and it will then automatically connect.
Additionally, WiFi will not stay off. If I'm some place I don't want it to connect to WiFi, I turn it off so that I don't get messages that networks are available (specifically when I'm driving, it's really annoying to deal with that over Waze).
I've got a Sprint GS5, running stock (not rooted), on 5.0. No updates available for the phone. It does this on every WiFi network I have saved (home, school, and school apartment, among others). I've also tried turning Smart Switch off and on, it makes no difference for either issue.
Is there any way to connect to the VPN Network automaticly?I'd like to use my WiFi a little more comfortable without the need to always switch it manual on and put in my password.
View 4 Replies View RelatedIs there anything in Cydia that automatically turns wifi on when you're at a specific location then back off when you leave that location? For example, when I go to school it automatically turns on, but when I leave it goes off again?
View 6 Replies View RelatedI know I can turn off cellular, but is it necessary? or does the web browser(and other apps) automatically prefer wifi? (need to know for data plan)Â
Also, when I turn off cellular. txt messages don't seem to get pushed through when they are sent.
Info:
iPad 2
does my iphone 4s connect automatically to a wife network?
Info:
iPhone 4S, iOS 5.1
Before, I used iOS 5.0.1 and wifi would keep turned on when the phone sleeps if I turn off data. This way I could always receive instant notifications. But then I sold the verizon phone and bought a used FU one, installed with iOS 5.1.1. Now wifi is automatically turned off when phone the sleeps, even when data is off. Is this how it works? Because I want to use wifi, even when the phone is off.
View 8 Replies View RelatedSometimes it does, sometimes it doesn't. Often my iPhone doesn't pick up wifi when I come into a wi-fi zone and stays on GPRS until I go into setting, wifi and then it picks up the network. Sometimes it does it automatically but it's annoying when it doesn't. It sometimes does the same with network signal if you go into a 'No Service' area and then come out of it it often takes a long time to pick up the network signal again.
Info:
iOS 5, MMS, iPhone 4S
My Iphone 4 has stopped automatically switching from G3 to wifi.
Info:iPhone 4, iOS 5.1.1
I'm facing problems like NOSERVICE(network) displaying, Iphone switching off automatically, not getting connected to ANY WIFI in my IPHONE 5S . My device is 2 months 25 days old , i had already contacted apple service center they are saying that Internal circuit has been damaged due to Short Circuit and warranty doesn't apply for it.
Info:
iPhone 5s, iOS 8.1.1
When I go into my settings and try to connect to wifi, it is greyed out and says no wifi
Info:
iPhone 3GS (8GB), iOS 5.1.1
I just "upgraded" my wi-fi router to a Netgear WNDR3400. Everything seems to be set up fine, and I'm able to connect with our various iphones, ipads, and AppleTV. But our iphones won't automatically re-connect to the network after the connection is lost, and we have to re-enter the password when we re-connect.
Info:
iPhone 4S
no-wifi sign is shown in my iphone 4s tht i newly brought...
Info:
iPhone 4S, iOS 5.0.1
Did the update and now my iphone 4s wifi does not connect to my home wifi. It just sits there with the little circle going round and round. My ipad3 updated and works fine...
Info:
iPhone 4S
All devices surfing wirelessly on Airport Express.Replaced Airport Express with Time Capsule.Problem: Wife's iPhone4 (5.1.1) can not surf on wifi provided by my time capsule. All my other devices (iMac, Mac Air, iPad and my iPhone) can. Wife's iPhone can surf on an unsecure network somewhere nearby in my apartment complex. (Which to me, rules out a hardware problem).
Steps taken: Tapped iPhone wifi On/Off multiple times with no change. "Forget this network" multiple times with no change. Reset iPhone Network Settings multiple times with no change. Restored iPhone using iTunes as New iPhone once with no change. (Since doing that, I have restored with back up of iPhone settings and data.) Powered Time Capsule on/off several times with no change. Turned wireless security off with no change. Security is back on. It is WPA 2 Personal with a lengthy password. I'm not getting the "incorrect password" msg. Renewed lease multiple times with no change.
Other indications: 3G is in upper left. Status wheel is spinning next to my network's name. On the initial "Settings" window, my network name is shown (as if it were connected. But tapping it and going to the "wifi networks" window shows the list of available networks with the status wheel spinning next to mine.) Tapping the blue arrow on my network name leads to the window that has "forget this network" at the top, and a list of blank fields: IP address, subnet mask, router and so on. DHCP is chosen, HTTP proxy is OFF. Sometimes, the top two fields (ip address and subnet mask) have values filled in, but the rest of the fields don't.
On my Time Capsule, as seen via Airport Utility (V5.5.3), 3 devices are shown as connected. Clicking this provides a listing. My wife's iPhone wi-fi address is listed. It's "rate" however is 1. My imac is 216 and my iphone is 65. BTW, iOS devices drop off the list when they go to sleep. No big deal there.
Back to Airport Utility, in the summary tab... status is normal, version is 7.6.1, wireless mode is "create a wireless network", security is "wpa/wpa2 personal", channel is 149 auto and 1 auto (I tried changing 1 to 11 with no change), connect using "ethernet" and finally my IP address begings with 76. 76.xxx.xxx.xxx
Moving to the "Wireless" tab of Airport utility... wireless mode is "create a wireless network", radio mode is auto, radio ch. selection is auto, wireless security is wpa/wpa2 personal, "remember password in keychain" is checked. Now Clicking on the "wireless network options" button..... 5ghz is not checked, country is USA, multicast rate is "low", t-mit power is "100%", WPA group key timeout is 1 day (it used to be 1 hour but this has made no change in the problem), "use wide channels" is not checked, "create a closed network" is not checked.
MAC access control is not enabled. But it was enabled previously and I added my devices by their Wi-Fi addresses one at a time until i decided to turn it off due to this problem. this resulted in no change with the problem.
Personally, I feel the prob lies with the DHCP and ip address and related fields, but I don't know enough about what their values should be in relation to my other devices to alter them on my own.
Info:
iPhone 4, iOS 5.1.1
I can make the phone connect by going to Manage Connections, and turning the Bluetooth selection OFF then immediately back ON.How do I set the phone so it always connects with vehicle Bluetooth everytime I get in? This is important.My Bluetooth device is a Parrot CK 3000 Evolution, built into the vehicle's sound system.
View 3 Replies View RelatedWhen I switch on my X10 , it does not automatically connect to my operator. I have to scan and then connect to operator everytime.. "Automatically connect to selected operator" (or sth like that) is chosen but still no way im connected to my operator on startup. And it is not related to my operator. When i try to use other operator, still the same..
View 2 Replies View RelatedI have Nokia 5800xm, I have updated the OVI maps to to version 3.3 and whenever I open it, mobile connects automatically to internet via GSM network which I don't want, before updating it asks me before if I want to connect or not. Now may most of application which need internet, it opens internet automatically. It does cost money because it's expensive to connect from mobile.
View 4 Replies View RelatedMy phone is set to connect automatically to my Bluetooth car kit at power up. Recently I have been getting a yes/no question whether I want to connect. How do I get back to automatic connect?
View 2 Replies View RelatedI paired my z3 with the bluetooth device of my Land Rover. The first time, the z3 ask me the security code that I wrote and all was good.
The system of my car didn't ask a code cause for the Land Rover the code is 2121 for each device. But I must write the code each time that I'm getting in my car. Other devices is connecting automatically after a first paring but with my z3 not.
