Motorola XPRT :: Its Stating Paired But Not Connected?
Nov 7, 2011
My Xprt was able to connect to my Bluetooth (Q Ant 2) without any issue. Over the past two days it cannot connect. I have removed battery from the phone, Shutdown/rebooted, made it scan for devices, cried/screamed etc. and to no avail. I get an audio prompt from my headset that states ( "Unable to connect") On my Xprt in the Bluetooth section I get "connecting...." then it will sate "paired but unable to connect".
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
it won't connect to my laptop by Bluetooth. Both devices will find each other and get as far as putting in the code to make sure they are the right device, then my computer confirms the connection and my phone shows up in Bluetooth devices, but on my phone is shows paired but not connected and there is no option to connect, only to unpair.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
My Razr is able to send each file to my other phone (Samsung S2) with bluetooth but it isn't able to receive any files: infact, the device results "paired but no connected" and refuses each kind of file. I turned off both devices and I turned on again, I paired again both phones but the problem persists: Razr sends files but doesn't receive them.No problem with my bluetooth headset.
I tried to send an image to my laptop. I was able to pair my laptop and my Moto Milestone XT720.On the first pic that I've sent through Bluetooth it went on smoothly. But then when I tried to send again, it didn't went through.The error says "Connection failure". When I checked the bluetooth settings the the laptop is paired but not connected.I tried to unpair and then paired again but still it won't connect.I turned the bluetooth on and off and still not connected.I even restarted both my laptop and my phone and still not connecting.
Does anybody know if I can tether a Blackberry Torch 9810 to a ThinkPad Tablet.When I try in Bluetooth on my Tablet I can get them paired but I get this message "Paired but not connected".Has anybody had any luck in doing this?
I have a Blackberry Curve 8900, Windows XP SP2, Desktop Manager 4.7 and a 3com PCMIA Bluetooth Card. Using the card I have successfully paired my computer with my Blackberry. All the services on the blackberry are enabled and the Bluetooth software shows that the serial port service is available using COM4. When I open Desktop Manager and open Connection Options, the 'use bluetooth' option is grayed out, so I cannot connect my Blackberry. Does anyone know what to do?
I am having trouble with bluetooth, having followed the intructions from your site, i keep getting the same msg, paired but unable to connect. what am i doing wrong?
Just downloaded the lastest update for iPhone 4s (5.1) and now none of my bluetooth devices will work even after paired and connected; reset everything - still having same problem; accessories work with other devices so it's the iPhone.
I am a newbie to a smartphone and am trying to connect to my old Samsung E2550 (which I will continue to use) to my Widlfire in order to transfer my contacts. I have managed to pair them but on the Wildfire it states paired but not connected.
Is there a way to adjust/add to the auto-correct dictionary for the physical keyboard of the XPRT? On my SOLD BB9650, this was done the first time I picked up the phone. Now, I can't. This phone (while waiting for Gingerbread), would be THE BEST, if it could fix this little problem...
What are the plans for future software updates for XPRT?Is Gingerbread going to be the last one? Any chance for 4.x?Because, see, as of today XPRT is lagging behind for like a year on Android updates.It was released (June 6, 2011) with outdated FroYo (released May 20, 2010).Now, if stars align, we'll get GB 2.3.5 update (released July 25, 2011) hopefully in August '12.And that also means that phone that's been out only for a year is already 2 major Android versions behind current one.
I can't seem to get my phone to vibrate. I set to "vibrate when in silent mode", then set to silent mode, but no vibration. I have also set vibration to "alwasy" but still nothing.
So yesterday I was using Facebook on my Bionic for a good half hour to 40 min. After I was done I put the phone in my pocket and went on my way. About an hour later I take out my phone to use it and upon waking up the phone, there was a pop up box on the screen stating that the Facebook app was either not responding or has been running for an extended period of time would you like to terminate the app? I click on the button to kill it off and that was that.
Has anyone ever had this happen on their phone? In all the years I've owned an Android phone I have never seen something like this, is this Moto's app killer? I know I do not have any apps listed in the apps to kill in the moto app killer so I'm not sure why this pop up came up.
I am trying to pair my SII to a motorola T325 speakerphone. It pairs fine but when it goes to download my phonebook it does not work. "Phonebook access request" shows up at the top of the phone screen but then nothing happens. I then attempted to put the speakerphone into manual mode and send the vCards over from the SII but when I attempt that it says ContactName.vcf not sent. I have reset the speakerphone to factory already. I have also tried deleting all pairings on the SII and re-pairing the speakerphone, nothing works. Speakerphone downloads phonebook from other phones fine. I need the contacts in this speakerphone so I know who I'm getting calls from at work.
I have had my Droid for over 2 years and it has worked very well with my Acura HandsFree Link. Suddenly, it told me it was paired and could not connect. My husband's I-Phone (AT&T was worked with this car as long as my Droid has. But the HandsFree has no trouble connecting to his IPhone. My Droid also cannot find my husband's Plantronics hands-free earphone. The OS appears to be the latest version as I checked and no updates are available.
I HAVE BOUGHT A MOTORLA XPRT A MONTH AGO AND I ADDED THE 3G MOBILE HOTSPOT TO IT A WEEK LATER. FOR A WEEK MY PHONE WAS DOING FINE AND THEN WHEN I USE THE 3G MOBILE HOTSPOT I KEEP MY PHONE PLUGGED IN AND THE BATTERY SAYS IT IS CHARGING BUT IT IS DOING THE COMPLETE OPPOSITE AND GOING DEAD. MY PHONE KEEPS TURNING OFF IN 4-5 HOURS AND IT IS SAYING IT IS DEAD. AND ALSO MY PHONE GETS HOT AT THE TOP OF THE PHONE, THE BOTTOM OF THE PHONE STAYS COOL.
Does the XPRT phone need to be activated by Sprint to get a HEX MEID? I have been using the XPRT off Sprint's network since purchase. It doesn't appear that I can activate the device from Sprint Zone while not on their network. Can I phone them to activate the XPRT?
When I am in camera or video mode my screen is black. When I hit the shutter button there is no sound and it goes away. On video I get the same screen but do get the sound when I try to record. There is no picture on either screen and the flash does not go off .
I prefer to use Wifi when I am at home. I'm showing as connected to wifi, but the 3g icon never turns off. Also, the 3g icon shows traffic. I just want to use wifi for all data. Not 3g.
I have a completely stock Moto XPRT running 4.1.15.MB612. When I select to check for updates, it says 4.1.110.MB612 is available so I click to download. I'm on wifi so thankfully it's not too slow. The phone reboots, shows the Android guy doing his thing then quickly boots back in to Android before eventually popping up with the error "failed to update". So I lurked the forums and see to hold the @ symbol down when in recovery and do so, here's what pops up.
I have at least 6 XPRT's in my company that users are complaining they turn on by themselves in the middle of the night. This started happening after the Gingerbread update and has happened on phones that I've done a factory reset on. I've had them remove them from the cases to make sure they are pressing on the power button but the problem persists. I've seen some posts from Droid users having had the same problem and one XPRT user on the Sprint forums.
Could it be an app that get's installed. I've confirmed they are shutting them off and not just putting them in "low power" mode.
at one time i used find a feature on my MOTOROLA XPRT that said PHONE CALLS ONLY which i took as only the number in my contact would be able to call and text me. Can someone tell me where and if my phone does offer that feature?