Does anybody know if I can tether a Blackberry Torch 9810 to a ThinkPad Tablet.When I try in Bluetooth on my Tablet I can get them paired but I get this message "Paired but not connected".Has anybody had any luck in doing this?
I've tried rebooting taking the battery out, switching on and off with and without the sim card I've left it for 3 hours backing up and when I returned it was still on 13%?
I am using Torch 9810 and I am facing problem during backing up my data through BB Desktop Software.Backup start smoothly but in the process it stops automatically and its gives Error saying "Cable is not connected Properly or make sure device is switched on".Same cable works fine while charging or transfering data from phone to pc or pc to phone.Everything works fine except the backup.
I have a Blackberry Curve 8900, Windows XP SP2, Desktop Manager 4.7 and a 3com PCMIA Bluetooth Card. Using the card I have successfully paired my computer with my Blackberry. All the services on the blackberry are enabled and the Bluetooth software shows that the serial port service is available using COM4. When I open Desktop Manager and open Connection Options, the 'use bluetooth' option is grayed out, so I cannot connect my Blackberry. Does anyone know what to do?
My Xprt was able to connect to my Bluetooth (Q Ant 2) without any issue. Over the past two days it cannot connect. I have removed battery from the phone, Shutdown/rebooted, made it scan for devices, cried/screamed etc. and to no avail. I get an audio prompt from my headset that states ( "Unable to connect") On my Xprt in the Bluetooth section I get "connecting...." then it will sate "paired but unable to connect".
I am having trouble with bluetooth, having followed the intructions from your site, i keep getting the same msg, paired but unable to connect. what am i doing wrong?
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
it won't connect to my laptop by Bluetooth. Both devices will find each other and get as far as putting in the code to make sure they are the right device, then my computer confirms the connection and my phone shows up in Bluetooth devices, but on my phone is shows paired but not connected and there is no option to connect, only to unpair.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
Just downloaded the lastest update for iPhone 4s (5.1) and now none of my bluetooth devices will work even after paired and connected; reset everything - still having same problem; accessories work with other devices so it's the iPhone.
I am a newbie to a smartphone and am trying to connect to my old Samsung E2550 (which I will continue to use) to my Widlfire in order to transfer my contacts. I have managed to pair them but on the Wildfire it states paired but not connected.
My Razr is able to send each file to my other phone (Samsung S2) with bluetooth but it isn't able to receive any files: infact, the device results "paired but no connected" and refuses each kind of file. I turned off both devices and I turned on again, I paired again both phones but the problem persists: Razr sends files but doesn't receive them.No problem with my bluetooth headset.
I tried to send an image to my laptop. I was able to pair my laptop and my Moto Milestone XT720.On the first pic that I've sent through Bluetooth it went on smoothly. But then when I tried to send again, it didn't went through.The error says "Connection failure". When I checked the bluetooth settings the the laptop is paired but not connected.I tried to unpair and then paired again but still it won't connect.I turned the bluetooth on and off and still not connected.I even restarted both my laptop and my phone and still not connecting.
opying contacts from a Bold 9810 to another 9810.Using the BB Desktop Software I did a full backup of the device (which contained 400+ contacts), then did a full restore on a new 9810, but only 200 contacts were copied over.Next I tried to do a selective restore, but although the 400+ contacts were in the file, it was grayed out and could not be selected. How can I get all the contacts into the new 9810. (Side note: I was able to restore the 400+ contacts to a BB Bold).
i recently saw on the website my phone can upload os 7.1 so i downloaded it to my pc but when i connect to desktop software and check it says no uploads available. I then tried doing it from the handset via options and again says phone software up to date. I am using os 6 but cant work out why it wont let me update to 7.1
i bought a 9810 and this is what happens: i connect it to the charger, then the red led turns on, eventually it goes off and a little sand watch appears for like 5 seconds, disappears, and the process starts all over again.
I just got a new Blackberry Torch 9810 and it won't let me add contacts. I scan someone's barcode and it says pending on my end but they never receive the request, we tried it the opposite way and it says pending on their phone but I don't receive the request.
I keep getting an "Error 102 Reload Software for furhter information [URL]" message. There is a Reset button below that and when I press it, it just tries to restart my blackberry. It will load to a certain point and then come back to this Error message. I went to the website it suggests and it tells me to go onto my Blackberry Desktop Manager and reload my software. I tried to do this, but my Desktop Manager and my smart phone will not connect and so I can't reload my software.
My BB Torch 9810 is less than 3 months old. Yesterday Morning, I observed that it went off. I thot the battery was down, so I decided to charge it. Then it began the booting and rebooting and has not stopped till now. My BB pin is (personal info removed) perhaps there is something remotely that can be done.
I was so excited to have a Blackberry device and my choice was the Torch 9810 mainly for 3 reasons.
1- The big screen. 2- The touch screen with the sliding keyboard. 3- Latest OS.
As I watched and read so many reviews about it and compared it to the Bold 9900 and the Torch 9860. The reviews for the Torch 9860 were somehow negative, and the sliding keyboard was a win over the Torch 9860. Bold seemed to be a good phone but the bigger screen was again what made me go for the Torch 9810.
For a new Blackberry user like me, I couldn't really figure out much differences between the three phones.
Unfortunately the Torch 9810 is not yet here in Egyptian market and I was about to buy a Bold 9900 till I noticed it would be locked to my carrier and then I changed my mind. I asked a family member to buy the Torch 9810 for me from the UAE and I finally got it one week ago.
i have blackberry torch 9810...my phone is not turning on , i dont known why battery is full only , i have changed battery from other tourch even i changed the battery not turing on? when i turn on torch 9810 the red led light is on for 3-4seconds , then its red led switch off , after that cursor running middle of the screen again and again come like this , but its not turn on? i have backup my blackberry before itself..how to restore the OS or hard rest.
Phantom calls. Rings once or twice, screen doesn't light up, no call on call log. No alerts set up. Tech support says to get an new telaphone number. I've had it for 12 years. That isn't going to happen.
oops my torch 9810 got wet. It seems to be completely dry now. the red marks on the battery and on the device are still there, but it won't power up. What can I try? I've plugged it in to the charger and to the computer--still no luck
My phone keeps freezing up with the system is busy symbol. Its been happening every other time I try to scroll or hit a key. I wait and/or take the battery out tounfreeze it. This makes my phone practically useless.