BB 8900 :: Bluetooth Is Paired / Device Not Connected
Mar 10, 2010
I have a Blackberry Curve 8900, Windows XP SP2, Desktop Manager 4.7 and a 3com PCMIA Bluetooth Card. Using the card I have successfully paired my computer with my Blackberry. All the services on the blackberry are enabled and the Bluetooth software shows that the serial port service is available using COM4. When I open Desktop Manager and open Connection Options, the 'use bluetooth' option is grayed out, so I cannot connect my Blackberry. Does anyone know what to do?
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
Just downloaded the lastest update for iPhone 4s (5.1) and now none of my bluetooth devices will work even after paired and connected; reset everything - still having same problem; accessories work with other devices so it's the iPhone.
I am a newbie to a smartphone and am trying to connect to my old Samsung E2550 (which I will continue to use) to my Widlfire in order to transfer my contacts. I have managed to pair them but on the Wildfire it states paired but not connected.
My Razr is able to send each file to my other phone (Samsung S2) with bluetooth but it isn't able to receive any files: infact, the device results "paired but no connected" and refuses each kind of file. I turned off both devices and I turned on again, I paired again both phones but the problem persists: Razr sends files but doesn't receive them.No problem with my bluetooth headset.
I'm trying to set up bluetooth synchronization for my 8900 now that I am no longer on a BES.I picked up an Asus USB BT-21 bluetooth adapter for my PC, which is apparently based on Broadcom hardware. I'm running Win7 64 bit and installed the Broadcom drivers for the adapter. I followed the instructions here: http://www.blackberry.com /btsc/ search.do? cmd=displayKC&docType=kc&externalId=KB04132&sliceId=1&docTy.Everything works fine up until the point where I go back into Desktop Manager and try to find my 8900. Desktop manager manages to find every other blackberry in my building except for mine. At the bottom of the instructions, it says that a conflicting IT policy might be the cause of this problem. So, I reset to factory defaults to remove any lingering IT policies as per the instructions here: http://www.blackberryforums.com/rim-software/67224-remove-policy.html?highlight=remove+policy Tried to connect again but still no joy in mudsville.
I have got Curve 9300 with OS v5.0.0.977. I am unable to receive anything using Bluetooth from the paired device but sending anything to other device is OK.
I tried to send an image to my laptop. I was able to pair my laptop and my Moto Milestone XT720.On the first pic that I've sent through Bluetooth it went on smoothly. But then when I tried to send again, it didn't went through.The error says "Connection failure". When I checked the bluetooth settings the the laptop is paired but not connected.I tried to unpair and then paired again but still it won't connect.I turned the bluetooth on and off and still not connected.I even restarted both my laptop and my phone and still not connecting.
I have a Nokia 2680 and I fully charged my bluetooth earpieces.On my phone, I set the Bluetooth on, gave my phone a name and selected phone's visibility to all.When I try to add a paired device to add the bluetooth, it gives me a message saying no device found.The bluetooth earpiece is right next to the phone. Can anyone help?
Just got myself a BB 8900, however it dosent seem to have any device memory, i have looked under memory in the options menu and it doesnt say anything about device memory and when i connect it to my PC i cannot find the phone on my computer unless i have a memory card pluged in,
I am trying to connect to my Landrover handsfree I have use this before with other hansets without problem Just sometimes it connects automatically, but 90% of the time it fails, even when I try to connect manually I can not get a connection?
Recently, I've got myself a Creative Soundblaster Roar 2, and when I connect it to my friend's Ipod, it shows the battery status on the ipod. Same happens when I connect it with a LG G3. But when I connect it to my S6, there is no such feature. Do I have to enable it in the settings? Or is it just a feature only available on IOS and LG.The speaker does come with a battery indicator, but its pretty vague. 3 lights only, and it indicates Full battery, 75% and low battery only. It'll be great to know the exact amount.
Does anybody know if I can tether a Blackberry Torch 9810 to a ThinkPad Tablet.When I try in Bluetooth on my Tablet I can get them paired but I get this message "Paired but not connected".Has anybody had any luck in doing this?
My Blackberry 8900 will pair successfully with the bluetooth system on a 2010 Jaguar XJ but will only autoconnect if I switch off the phone and then restart it. It used to connect automatically.
My Xprt was able to connect to my Bluetooth (Q Ant 2) without any issue. Over the past two days it cannot connect. I have removed battery from the phone, Shutdown/rebooted, made it scan for devices, cried/screamed etc. and to no avail. I get an audio prompt from my headset that states ( "Unable to connect") On my Xprt in the Bluetooth section I get "connecting...." then it will sate "paired but unable to connect".
I am having trouble with bluetooth, having followed the intructions from your site, i keep getting the same msg, paired but unable to connect. what am i doing wrong?
it won't connect to my laptop by Bluetooth. Both devices will find each other and get as far as putting in the code to make sure they are the right device, then my computer confirms the connection and my phone shows up in Bluetooth devices, but on my phone is shows paired but not connected and there is no option to connect, only to unpair.
I'm seeing a problem since the update. When my phone is not connected to a bluetooth device, the icon is white (gray). When it is connect, it is blue. Sometime when I power off my headset (Motorola HX-1 or H17txt) I notice the icon stays blue.his is bothersome becuase I'm not sure if something else is connecting to my phone. I check the wireless settings and all my devices will show Paired but not connected.Anyone else seeing this issue? I'm in NYC a lot and call me crazy but I worry about these kind of things. Back in the analog cell phone days, my phone would get cloned at least every other month going over the GWB resulting in $3-4k in cell bills.
I have C7 with Anna SW in it (022.014). What I noticed was that when other devices are trying to pair with the C7 it automatically fails. BT is visible to all and the are now block connections. The other devices can find my C7 but somehow C7 rejects the the other devices immediately and won't even prompt the safety word (or security code?).
But when I initialize the pairing from the C7 everything goes fine. The security number is prompt and pairing is finalized.
I have not tested this whit other phone (5800) and PC BT software.
It is a problem because Nokia Suite (3.2.100) needs to do the BT pairing. And it won't accept even if the C7 and PC has already paired.
I paired my bh-905 headphones with my iPhone 4 and then with my PC as the second paired device. To do this I turned off the iPhone, held the multifunction button on the phone down until the phones entered discovery mode (blinking blue light), and then they are seen at the PC, no problem. Both ways they work well with great sound, and with the iPhone calls ring in and the music continues when done with the call. I usually use them at work, connected to the iPhone, but sometimes at home I want to use them with the PC. To connect to the PC, I first turn off the iPhone bluetooth, but then I can't get the phones to connect to the PC again unless I remove their bluetooth entry from the PC and re-pair as a new device. It's a small quibble, but other bluetooth sets I own will find the other active devices to which they're paired.Is there a procedue to switch the blutetooth connection from one already paired device to another without re-pairing the phones each time?
I just got a new blackberry bold an dwould like to know I can transfer all my contacts from the old blackberry to the new one? I cant seem to get the bluetooth paired?
Whenever I try to get the files from my other phone I just cant use bluetooth. It just say paired but not connected and when I try to connect it will not work..
I have an E71 and I am having bluetooth issues. This happened firstly using my Navman handsfree and now my handsfree through my Sony car stereo. It all connects up fine works great and then after about two weeks stops connecting when I get in the car. I can't get it to connect at all tried deleting the devices on everything and re pairing but it will no longer pair. I have paired another phone to the car stereo so it must be the phone. Is there anything i can do settings wise or does. It sound like a repair is needed to the phone.
I have just got a Bold 9700 and am really starting to like this phone. But I cannot get the bluetooth to work properly. It will pair with my devices but will not connect to them. It says connection failed or connection not supported. It will not connect to my cars built in bluetooth either, I have a new 2010 galaxy and it accepts the cars passkey but will not connect. I Really need my phone to connect to my car. When I go to my paired device list and click on a device I do not get a connect option, which I have been told to use. I am on vodafone in the UK and have contacted them to see if they can help but they tell me they do not help with Blackberry's (funny that when they take my money for it) so I am unsure where to contact now for help.
I cannot get my iPhone 4S to bluetooth connect with my iPad2. At one time they were successfully paired, but then they would not link. So, in an effort to 'start over' I used the 'Forget' option on both devices. This didn't work, so I :- a). Reset both devices using the Home button & Power button option. (to no effect), then b). Reset the Network settings on both devices , again to no effect.
I got my blackberry curve for christmas. it didnt come with a new sim because i was keeping my number.. im with meteor (ireland). I invited a few of my friends to my bbm using their pin but it didnt go through just comes up pending but they never got the invite. when they try to invite me using my pin i dont get an invite. As well as that i an send files using bluetooth but some how can not recieve even if paired with the other device.
When using the E5 with the Toyota bluetooth carkit, it fails to deblock itself. Answering calls is not a problem as the E5 auto-deblocks upon receiving a call, but dailing via the carkit does not lift the block. As a result, I must first deblock it manually by entering the deblocking code which only solves the problem for a few minutes. Disabling auto-deblocking is not an option, as it would make the data on the phone vulnerable in case the phone would be lost/stolen. (This is about the code-block and not about the unprotected keypad block.) I have succesfully used HTC's and older Nokia's on the same carkit without this problem arising and my E5 software is up to date. Does anyone know how to arrange an auto-deblock when a bluetooth-paired device is being used like a carkit?
I am trying to pair my SII to a motorola T325 speakerphone. It pairs fine but when it goes to download my phonebook it does not work. "Phonebook access request" shows up at the top of the phone screen but then nothing happens. I then attempted to put the speakerphone into manual mode and send the vCards over from the SII but when I attempt that it says ContactName.vcf not sent. I have reset the speakerphone to factory already. I have also tried deleting all pairings on the SII and re-pairing the speakerphone, nothing works. Speakerphone downloads phonebook from other phones fine. I need the contacts in this speakerphone so I know who I'm getting calls from at work.
I have had my Droid for over 2 years and it has worked very well with my Acura HandsFree Link. Suddenly, it told me it was paired and could not connect. My husband's I-Phone (AT&T was worked with this car as long as my Droid has. But the HandsFree has no trouble connecting to his IPhone. My Droid also cannot find my husband's Plantronics hands-free earphone. The OS appears to be the latest version as I checked and no updates are available.
