IPhone :: 4S Successfully Paired With IPad 2 Via Bluetooth But Not Linked
May 1, 2012
I cannot get my iPhone 4S to bluetooth connect with my iPad2. At one time they were successfully paired, but then they would not link. So, in an effort to 'start over' I used the 'Forget' option on both devices. This didn't work, so I :-
a). Reset both devices using the Home button & Power button option. (to no effect), then
b). Reset the Network settings on both devices , again to no effect.
I sent my sister a message on my ipad 3. She responded and it went to my iphone and my wifes iphone. Now any time they send a message back and forth, i get it on my phone and ipad. i do not want their messages going to me. My wife and I share an itunes account. My phone is a 4s. My wifes is a 4
Just downloaded the lastest update for iPhone 4s (5.1) and now none of my bluetooth devices will work even after paired and connected; reset everything - still having same problem; accessories work with other devices so it's the iPhone.
I have C7 with Anna SW in it (022.014). What I noticed was that when other devices are trying to pair with the C7 it automatically fails. BT is visible to all and the are now block connections. The other devices can find my C7 but somehow C7 rejects the the other devices immediately and won't even prompt the safety word (or security code?).
But when I initialize the pairing from the C7 everything goes fine. The security number is prompt and pairing is finalized.
I have not tested this whit other phone (5800) and PC BT software.
It is a problem because Nokia Suite (3.2.100) needs to do the BT pairing. And it won't accept even if the C7 and PC has already paired.
I "think" this is the trigger. When I'm on a call my phone will drop the connection to the car handsfree link and revert to the phone (you can still see the bluetooth icon lit) whenever I receive a notification for anything. If it's a text, email, or whatever the call will suddenly cut out go to the phone and then 10 seconds later or so reconnect to the car stereo.
I just got a new blackberry bold an dwould like to know I can transfer all my contacts from the old blackberry to the new one? I cant seem to get the bluetooth paired?
I have a Blackberry Curve 8900, Windows XP SP2, Desktop Manager 4.7 and a 3com PCMIA Bluetooth Card. Using the card I have successfully paired my computer with my Blackberry. All the services on the blackberry are enabled and the Bluetooth software shows that the serial port service is available using COM4. When I open Desktop Manager and open Connection Options, the 'use bluetooth' option is grayed out, so I cannot connect my Blackberry. Does anyone know what to do?
Whenever I try to get the files from my other phone I just cant use bluetooth. It just say paired but not connected and when I try to connect it will not work..
When I go into "Bluetooth Settings" I cannot set the device to "discover-able".All of them say "paired but not connected" but none will connected to the device with which it is paired. And one more thing: when I scan for devices, it scans and scans but will not detect/find any device.
I am trying to send my contacts from my old phone to my new Atrix 4G via Bluetooth. But Atrix keeps showing my old phone as paired but not connected. I even tried to connect it with my husband's iphone, but it still shows the same status.
I have an E71 and I am having bluetooth issues. This happened firstly using my Navman handsfree and now my handsfree through my Sony car stereo. It all connects up fine works great and then after about two weeks stops connecting when I get in the car. I can't get it to connect at all tried deleting the devices on everything and re pairing but it will no longer pair. I have paired another phone to the car stereo so it must be the phone. Is there anything i can do settings wise or does. It sound like a repair is needed to the phone.
I have just got a Bold 9700 and am really starting to like this phone. But I cannot get the bluetooth to work properly. It will pair with my devices but will not connect to them. It says connection failed or connection not supported. It will not connect to my cars built in bluetooth either, I have a new 2010 galaxy and it accepts the cars passkey but will not connect. I Really need my phone to connect to my car. When I go to my paired device list and click on a device I do not get a connect option, which I have been told to use. I am on vodafone in the UK and have contacted them to see if they can help but they tell me they do not help with Blackberry's (funny that when they take my money for it) so I am unsure where to contact now for help.
I am trying to connect to my Landrover handsfree I have use this before with other hansets without problem Just sometimes it connects automatically, but 90% of the time it fails, even when I try to connect manually I can not get a connection?
I am a newbie to a smartphone and am trying to connect to my old Samsung E2550 (which I will continue to use) to my Widlfire in order to transfer my contacts. I have managed to pair them but on the Wildfire it states paired but not connected.
My Razr is able to send each file to my other phone (Samsung S2) with bluetooth but it isn't able to receive any files: infact, the device results "paired but no connected" and refuses each kind of file. I turned off both devices and I turned on again, I paired again both phones but the problem persists: Razr sends files but doesn't receive them.No problem with my bluetooth headset.
I have an Atrix that is working very well for me (i used blackberries, samsung window 7, other android phones and the Atrix is the best of the bunch). I have one annoying issue that I couldn't find at various forums and the moto customer support couln't help with. I have an audi s8 2007. The phone connects fine to the audi bluetooth but once the Atrix screen sleeps, the number of the signal bars displayed on the car's screen freezes. If I wake the Atrix screen the car screen immediately displays the correct signal bars but freezes again once the Atrix screen sleeps. I have tested that extensively and it is related to the Atrix screen sleeping. The car screen displays signal bars in areas where there is no signal and it will show one bar in areas where there is 5 bars. Any ideas on what setting on the phone may be affecting this.
I have an Atrix that is working very well for me (i used blackberries, samsung window 7, other android phones and the Atrix is the best of the bunch). I have one annoying issue that I couldn't find at various forums and the moto customer support couln't help with. I have an audi s8 2007. The phone connects fine to the audi bluetooth but once the Atrix screen sleeps, the number of the signal bars displayed on the car's screen freezes. If I wake the Atrix screen the car screen immediately displays the correct signal bars but freezes again once the Atrix screen sleeps. I have tested that extensively and it is related to the Atrix screen sleeping. The car screen displays signal bars in areas where there is no signal and it will show one bar in areas where there is 5 bars. Any ideas on what setting on the phone may be affecting this
I'm trying to set up bluetooth synchronization for my 8900 now that I am no longer on a BES.I picked up an Asus USB BT-21 bluetooth adapter for my PC, which is apparently based on Broadcom hardware. I'm running Win7 64 bit and installed the Broadcom drivers for the adapter. I followed the instructions here: http://www.blackberry.com /btsc/ search.do? cmd=displayKC&docType=kc&externalId=KB04132&sliceId=1&docTy.Everything works fine up until the point where I go back into Desktop Manager and try to find my 8900. Desktop manager manages to find every other blackberry in my building except for mine. At the bottom of the instructions, it says that a conflicting IT policy might be the cause of this problem. So, I reset to factory defaults to remove any lingering IT policies as per the instructions here: http://www.blackberryforums.com/rim-software/67224-remove-policy.html?highlight=remove+policy Tried to connect again but still no joy in mudsville.
When using the E5 with the Toyota bluetooth carkit, it fails to deblock itself. Answering calls is not a problem as the E5 auto-deblocks upon receiving a call, but dailing via the carkit does not lift the block. As a result, I must first deblock it manually by entering the deblocking code which only solves the problem for a few minutes. Disabling auto-deblocking is not an option, as it would make the data on the phone vulnerable in case the phone would be lost/stolen. (This is about the code-block and not about the unprotected keypad block.) I have succesfully used HTC's and older Nokia's on the same carkit without this problem arising and my E5 software is up to date. Does anyone know how to arrange an auto-deblock when a bluetooth-paired device is being used like a carkit?
I am trying to pair my SII to a motorola T325 speakerphone. It pairs fine but when it goes to download my phonebook it does not work. "Phonebook access request" shows up at the top of the phone screen but then nothing happens. I then attempted to put the speakerphone into manual mode and send the vCards over from the SII but when I attempt that it says ContactName.vcf not sent. I have reset the speakerphone to factory already. I have also tried deleting all pairings on the SII and re-pairing the speakerphone, nothing works. Speakerphone downloads phonebook from other phones fine. I need the contacts in this speakerphone so I know who I'm getting calls from at work.
I tried to send an image to my laptop. I was able to pair my laptop and my Moto Milestone XT720.On the first pic that I've sent through Bluetooth it went on smoothly. But then when I tried to send again, it didn't went through.The error says "Connection failure". When I checked the bluetooth settings the the laptop is paired but not connected.I tried to unpair and then paired again but still it won't connect.I turned the bluetooth on and off and still not connected.I even restarted both my laptop and my phone and still not connecting.
I have had my Droid for over 2 years and it has worked very well with my Acura HandsFree Link. Suddenly, it told me it was paired and could not connect. My husband's I-Phone (AT&T was worked with this car as long as my Droid has. But the HandsFree has no trouble connecting to his IPhone. My Droid also cannot find my husband's Plantronics hands-free earphone. The OS appears to be the latest version as I checked and no updates are available.
I used to pair my iPad2 with my iPhone 4S (both iOS 5.1) using Bluetooth. Not working anymore.I can pair the iPad to a BT keyboard; 2) The connection was usually started from the iPad; 3) The iPhone doesn`t always find Bluetooth devices around (the other day, a rented car BT recognized my iPhone and I was able to pair them); 3) Both the iPad and iPhone do not find my iPod touch (iOS 5.1; 64 Gb)...
confirm that the difficulty in pairing these two with each other is that they both have a Master BT protocol and so cannot adopt a Master - Slave relationship? setting the iPhone to a Personal Network for example. I haven't managed to find this on the iPhone 4S, just VPN, Wi-Fi or Data. Or should I just accept that they won't ever communicate via Bluetooth!?
I cannot get my iphone 4S to bluetooth with my ipad 2, wifi only.
Neither one can see each other even though both bluetooth are on. I am trying to use my IPHONE's 4S, 3G service on my IPAD 2 using bluetooth. A friend of mine has a Droid, we both have unlimited data plans from a long time ago, and my IPAD 2 can bluetooth with his Droid and I'm able to use the internet.
