Motorola Atrix 2 :: Audi S8 Bluetooth Displays Incorrect Signal Bars When Linked?
Nov 2, 2011
I have an Atrix that is working very well for me (i used blackberries, samsung window 7, other android phones and the Atrix is the best of the bunch). I have one annoying issue that I couldn't find at various forums and the moto customer support couln't help with. I have an audi s8 2007. The phone connects fine to the audi bluetooth but once the Atrix screen sleeps, the number of the signal bars displayed on the car's screen freezes. If I wake the Atrix screen the car screen immediately displays the correct signal bars but freezes again once the Atrix screen sleeps. I have tested that extensively and it is related to the Atrix screen sleeping. The car screen displays signal bars in areas where there is no signal and it will show one bar in areas where there is 5 bars. Any ideas on what setting on the phone may be affecting this
View 1 Replies
ADVERTISEMENT
Nov 2, 2011
I have an Atrix that is working very well for me (i used blackberries, samsung window 7, other android phones and the Atrix is the best of the bunch). I have one annoying issue that I couldn't find at various forums and the moto customer support couln't help with. I have an audi s8 2007. The phone connects fine to the audi bluetooth but once the Atrix screen sleeps, the number of the signal bars displayed on the car's screen freezes. If I wake the Atrix screen the car screen immediately displays the correct signal bars but freezes again once the Atrix screen sleeps. I have tested that extensively and it is related to the Atrix screen sleeping. The car screen displays signal bars in areas where there is no signal and it will show one bar in areas where there is 5 bars. Any ideas on what setting on the phone may be affecting this.
View 5 Replies
View Related
Aug 31, 2012
I have a replacement 860 that won't pair with my car phone. The other one did. This one won't ask for the PIN, and then says it can't pair because the PIN is incorrect. How typical is that. It's the same car phone, and the same model phone.
View 1 Replies
View Related
Jan 31, 2012
I was wondering if anyone knows what algorithm is used for the signal bars on the Photon 4G. I have found that there seems to be no correlation between the signal strength (in dBm / asu) in Settings -> About phone -> Status and the signal bars that are shown. Often the signal bars will shoot from 1 to 5 or 6 even with really low signal ( ~97 to > 100 dBm) that doesn't fluctuate.
View 3 Replies
View Related
Dec 6, 2011
I just upgraded my Atrix to Gingerbread and the contacts images are no longer loading from the linked profiles.I cannot figure out how to enable this again.
View 13 Replies
View Related
Aug 8, 2012
What does a flashing blue triangle above the signal bars mean? I still have a blue 3g but no signal bars.
View 4 Replies
View Related
Jul 21, 2010
Anyone else experience this? I did th sotware upgrade and a few hours later this happened. I tried manually connecting to the network and it wont. T-mobile asked me to send the phone back but there is a major scratch on the screen so they told me my return warranty was void now.So far I have a $400 paper weight. Anyone fix this issue?
View 1 Replies
View Related
Sep 12, 2011
What is the difference between the white and blue signal strength bars?
View 4 Replies
View Related
Jan 21, 2013
phone will lose signal. have to restart phone to get signal back. anybody know how to fix
View 5 Replies
View Related
Jul 27, 2011
What do these Icons represent or mean, and the meaning when they change Colors from White to Blue (Status Icons). There was a GB 2.3.4 User Manual Posted on Moto's site, Unfortunately no information was included about these Items. What does it mean when all three are blue, Including the H+ icon having arrows beneath it at the same time? Is it also Possible to have the Intro Video Posted or embedded to this thread as well please.
View 15 Replies
View Related
Jun 28, 2012
I need help getting cell tower reception on my phone. Using China Unicom as Network Carrier. I am located in Guangzhou China (a major metropolis). The problem is not with the SIM Card itself because it has been tested and placed in other phones & it works well. Reception Bars fluctuate between 0-2 bars at most, both in and outdoors.Have noticed these problems since upgrading the phone to IOS 5.0 & now also on 5.1.1. No problem with Wi-Fi Networks. I have also tried Resetting the Network & taking out the SIM Card and putting it back in, but this has not helped.
Info:
iPhone 3GS, iOS 5.1.1, Model MC637ZA Serial 83028W5VEDG
View 1 Replies
View Related
Oct 27, 2011
I have a Motorola Atrix on AT&T. I've called technical support multiple times but still have the issue. In my apartment, my phone shows full bars but when I dial a call out, the phone will hang up right away. Other times it will hang itself up and error "call failed".
I've been to the corporate store where they have given me a new SIM card, but it still does not fix my issue. I am trying to figure out if this is a hardware or network issue so I can contact the right people to have the issue fixed.
If my phone is showing full bars that means I have network coverage.
View 1 Replies
View Related
May 3, 2011
Just got the new OTA update,now my phone only displays the edge e symbol now,thought this was gonna help get faster 3g speeds.
View 5 Replies
View Related
Mar 21, 2010
have just upgraded my ancient Nokia 6230 to a new 16GB X6. Overall I am pleased with the X6 BUT I have a problem with it sync'ing up with my Audi Bluetooth (its the OEM Audi Kit). X6 "pairs" with the Audi Bluetooth, On my Audi Sat Nav display which can be switched to a telephone display I get that its hooked up to the Orange phone network and I can make and receive calls with the Nokia X6 via the Audi interface.What does NOT happen is that my Nokia X6 phonebook does not upload to my Audi Bluetooth System. The Audi System should also show received and recently made phone calls.My old Nokia 6280, my company Nokia 6021 & my wifes Sony Ericsson K800i all work perfectly with the Audi Bluetooth system so something is definately "up" with the X6 Bluetooth interface. As the "Bluetooth" is supposed to be an Industry Standard, why is the X6 bluetooth operating differently or incorrectly or is there some sort of software application I need to download to fix it?
View 19 Replies
View Related
Oct 11, 2011
When I connect my new BB 9900 to my Audi A5 via bluetooth I have two problems. Before I explain let me also say that the phone Icon that is displayed on my Audi screen is different to the one I had with my BB 8310 Curve and my iPhone. Instead of a picture that looks like a phone its a picture of a phone with what appears to be a simcard showing inside of it. Does that mean anything?
Anyway, my two problems are:
1) I cant synch contacts. Ive deleted call lists, rebooted phone, re-paired debvice etc etc but no luck.
2) The worst problem of all....when I synch up the device to my Audi I cant do anything on the BB while its paired. Thats because there is a message on the screen saying something like "SAP access someting or other..." and to get rid of the message and look up a number or an email (not while driving of course) means I have to kill the bluetooth link..
Worst thing is I had an option to go with the iphone or the BB 9900. Im beginning to think I made the wrong choice..
View 1 Replies
View Related
Aug 24, 2014
I recently replaced my iPhone 4S with a S5 and am having one nagging problem - I cannot get directions from the MAPS app to come thru the audio system of my 2011 Audi A6. I had no problems whatsoever doing this with my iPhone. I have read a number of threads where people have had similar problems but none were specific to the Audi's audio (MMI) system. I have paired and re-paired the S5 with the car numerous times and have tried countless possible solutions, but the navigation directions always and only come thru the phone's speaker. With the car's radio on, this becomes a problem. With my iPhone, the radio broadcast would cut out whenever directions (using Google Maps) were spoken.
View 8 Replies
View Related
Jun 28, 2011
Right now I have multipule contacts on my atrix that are "linked." Is there anyway to permanently consolidate all the linked contacts into one and export all my contacts as a csv file for outlook and gmail?
View 8 Replies
View Related
Nov 3, 2014
We had our Fall time change Saturday, and my HTC One M8 failed to adjust for daylight savings. Well, parts of it failed.
The small time display next to the battery meter is correct.
The large time display in the Sense 6 widget is one hour ahead. When the screen is locked, the time is displayed correctly, but when the phone is unlocked, the time is displayed one hour ahead. They're probably two separate widgets? Tap the Sense 6 widget, and the local time on the world clock page is also one hour ahead.
Any way to get the Sense 6 widget to display the correct time?
View 2 Replies
View Related
Aug 16, 2011
It seems that the messaging widget rarely/randomly displays new text messages. This is after updating to build 4.5.91 through the SOAK testing. Is anybody else having these issues? It shows my corporate sync messages immediately and with no issues, but the SMS usually lag behind by a few minutes or never display in the widget at all.
View 6 Replies
View Related
Aug 20, 2012
THE STRING "fastboot oem get_unlock_data" DOES NOT RETURN ANY DEVICE ID. WHY?The bootloader on Motorola devices released before August 2012 is not unlockable. This fastboot command will not return a device ID or unlock data for these Motorola devices. At this point, only the devices on our Supported Devices list are eligible for the unlockable bootloader program.HOW DO I TELL IF MY DEVICE HAS AN UNLOCKABLE/RE-LOCKABLE BOOTLOADER?This depends on a few factors. First is whether the device ships with a bootloader that is capable of being unlocked or re-locked. Second is whether the wireless carrier that sells the device allows the bootloader to be unlocked, as each of our operator partners has their own policy. As new devices are released, please check the bootloader introduction page. You will be able to check whether your device shipped with an unlockable bootloader. We will be adding devices to this list regularly.As of August 2012, the only Motorola devices which can be unlocked are:
Photon Q 4G LTE (Sprint)
RAZR Developer Edition (Europe Only)
XOOM
Now above what I have bolded are my areas of concern. In particular, the second quote:First is whether the device ships with a bootloader that is capable of being unlocked or re-locked.The Motorola Atrix HD has indeed shipped with a bootloader that is capable of being unlocked or re-locked. It supports the exact same commands as the Motorola Photon Q 4G LTE does, the commands of:
fastboot oem unlock
fastboot oem get_unlock_data
fastboot oem lock
This device fits that exact definition. Running a strings.exe runthrough of the bootloader from the Atrix HD shows that it indeed supports these commands, and anyone with this device and the android-sdk can run these commands themselves. The part where the unlocking process is stuck is the Motorola "Unlock My Device" webkit, where the results of "fastboot oem get_unlock_data" were pasted into the box to get the emailed UNIQUE_KEY to put into "fastboot oem unlock [ unlock code ] " as the same process is the Photon Q 4G LTE. The site comes up with this error:As you can see, we can assume the second half of the "few factors" as the faq pointed out:Second is whether the wireless carrier that sells the device allows the bootloader to be unlocked, as each of our operator partners has their own policy.Assuming this, it is then AT&T's decision that the Motorola Atrix HD has a locked bootloader, but the device DOES support unlocking and re-locking, contrary to the first quote in this post from their faq about devices before August 2012 NOT supporting these functions.The bootloader on Motorola devices released before August 2012 is not unlockable.So my question is, will this information be able to get corrected, or is Motorola planning to make an announcement that the Motorola Atrix HD will not be unlocked because of AT&T, but that the hardware and software actually support unlocking and re-locking?
View 2 Replies
View Related
May 28, 2012
I had an incorrect password attempt(10 times) i guess. This lead to factory reset to my phone. While logging back in, the motoblur account retrieved all my previous accounts but all my phone and memory card data is completely gone. Not sure, if it was a factory reset or the andriod upgrade which did that. Is there a way to find out ? And i really need my important data back. I assume the data is not literally deleted from the phone or card memory, but is there a way to retrieve it. I had a backup activated but not sure where to restore it from and how long was that backup updated.
View 1 Replies
View Related
Nov 9, 2011
what is the difference between the blue 3g and bars and white 3g and bars. always wanted to know
View 1 Replies
View Related
May 8, 2010
I have the Nokia E71 On O2.
When i hang around with my mates, the have normal Samsung Or LG phones and they get lets say 4 bars of signal on O2.
I will be standing with them and i get nothing. I feel like my nokia phone is just rubbish on this part.
Or would there be some setting i need to change for it to work? - Or is the phone faulty?
View 5 Replies
View Related
Aug 15, 2010
Well I have found a way to easily switch your signal bars on your status bar from regular bars to db's and back whenever you want. Well I'm on the latest beta of 4.1 (8b5097d) on IPhone 4 and it does have feild test (maby it's just because I restored from my 3GS but idk). So go to your phone app and then to the keypad. Then type *3001#12345#* and press call, this will put u in field test app. At the top I can tap the bars and it will switch to db's and if tapped again it will go back. So once u tap to change to db's hold the sleep button till slide to power pops up then let go of the sleep button and hold the home button (this is a respiring). Once u do that u can just easily tap the bars or db's and switch where ever you are in your phone. Good luck hope it works on all your phones. And ps you don't need to be jailbroken!
View 24 Replies
View Related
Oct 4, 2015
I purchased an unlocked Sony Xperia Z3 yesterday. I placed my sim in it but the phone keeps saying that there is no service and there is currently no bars. When I try to call it says I am in flight mode even though it is off. I had a friend who had this problem but it fixed itself.
View 9 Replies
View Related
May 20, 2012
i have an iphone 4s unlocked on ios 5.1.1 and i can not receive no calls or make call
Info:
iPhone 4S, iOS 5.1.1
View 6 Replies
View Related
Apr 6, 2015
yesterday morning my Sony z3 was working great when all of a sudden the signal dropped and said no service. It has been 24 hours now and still nothing. I restarted the phone many times, did a factory reset, updated software, fixed software and left it off for a while.
View 2 Replies
View Related
Mar 20, 2012
The little 'E' that was next to my signal bars has dissapeared and now i can't send texts, make calls or go on the internet.
Info:
iPhone 4
View 2 Replies
View Related
Oct 31, 2012
I've been experiencing this strange problem for few weeks with my N8. When I'm receiving or making a call,network signal level drops from full to 2 bars. Happens only when i hold my phone from its lower end(where menu button is located). As long as i hold phone from its upper end(where audio jack is located), signal level is maintained to full bars. Such fluctuations don't occur when phone is lying still somewhERE. Signal starts dropping only when phone is held by its lower end. Happens while accessing 3G too. Is this a normal thing? I checked after changing SIM and switching to another network provider. Still the same.
View 5 Replies
View Related
Jun 29, 2010
I have been having this problem a lot since I got the phone. If I am out especially in building where it shows good signal it take it forever to load data. text goes through fine but data takes forever. Much slower than my 3GS why is this? Is it my phone or are others getting this?
View 24 Replies
View Related
Jun 30, 2010
I received my iPhone 4 on launch day via a pre-order. I am very grateful to have it and to have received it while others still try to get one. Anyway, onto the issue. I had signal drop issues from the get go, occasionally even a few dropped calls. Per Apple's statement and other blog recommendations I bought a case to alleviate the issue. It's the Griffin Reveal. It is a nice case too. Last night I noticed low signal bars after a dropped call and realized I was holding it over the left corner. I let go and up went the bars.
I called care. They opened a case # and gave me the same as anyone else. I was told that I needed a bumper to fix the issue, that they couldn't guarentee with any third party case it would fix the issue. I responded asking why I should give another $30 to fix an issue they know about. I asked if I would recieve and email or call to follow up and they said they didn't know. I will follow up in 2 days and let you know. Is this a ploy to just get people to spend more money? 1.7 million sold in three days x $30 for a bumper = $51 million more for.
View 17 Replies
View Related
