I just received a Motorola w385 from Page Plus and when I try to check my text messages, I get an error that says "Inbox requires Setup." and then forces me to exit.I've tried calling Page Plus but their CS is overloaded. Any ideas how to fix this?
View 4 Replies
My W385 requires a BT50 battery. The Motorola replacement battery is $25, and is rated at 850 mAh. There are aftermarket batteries available at 1/3 the price, but although it is referred to as a BT50 replacement, it is rated at 1,000 mAh. Is the difference in ratings a problem?
View 7 Replies View RelatedMy phone keeps flashing the M and the white screen repeatedly. does anyone know what might be causing this?
View 2 Replies View RelatedMy W385 went through a rough patch. Anyway, I flashed the firmware to it (it was displaying "init usb_bootloader" prior to the flash). Now it displays "needs initial programming" after it boots. My local Verizon "Store" said it could not be restored.
View 3 Replies View RelatedI just got a new Motorola W385 from US Cellular. I can not get P2K Commander version 6.0.0 to recognize the phone. I have installed the Handset USB Drivers from the Motorola website and set the software to use the correct COM port. If the Mode is set to P2K/P2K05, when the software starts it says that the phone is Linux based and wants to change the mode to P2K05 over USBLAN. This has not corrected the problem. I have tried all three options under P2K Tuning. Do I need a different version of P2K Commander or a different driver? I saw that the instructions called for version 4.9.C of P2K Commander but I was not able to find a downloadable copy of that version.
View 1 Replies View RelatedMy "new" used W385 will not show EVDO.My other VZW phones do show EVDO.I'm in NYC so EVDO coverage not an issue.Have tried in various parts of the city. Same results.Have rebooted. Removed battery. And reset phone. No difference.Any suggestions on what to try next? Also, what is latest software for this unit? The good news is the RF is even better than my formerly trusty e815.
View 3 Replies View RelatedI purchased a w385 on ebay. When I received it I tested it and the keypad worked, as well as the camera and all the menus.I then proceeded to activate it on Page Plus Cellular. Customer Service rep asked me to press *22890 for the OTA reprogramming and after that sequence/process the keypad stopped working correctly.
After that when I open the flip phone it automatically dials *, sometimes I can dial one or two numbers and then it stops. But the majority of the time none of the numbers, nor the clear, camera, send or menu buttons work.I can still receive calls.To try to fix it I flashed to the latest firmware version (.18). No improvement so then back to the one that was on the phone (.16). Still no improvement.Are there any suggestions to try to have the phone work correctly?
I have a motorola W385 phone. I've always used XP and P2k Commander 6.0.0 to change ringtones and wallpaper images.
I've since upgraded to windows 7 and I can't figure out what to do now to accomplish these tasks. I have installed the latest MotoDev drivers 4.2.4 I believe, I have installed p2k 6.0.0 But the software just will NOT recognize the phone. It shows up as a modem on com6... as soon as I set the program to com6, the modem disappears from device manager.
I've done this 4 or 5 times in the past using XP and I'm just wondering if anybody has had success with Windows 7 and what software they used to do it?
Really I just want to change the wallpaper and I'm not sure how to send a text message to the phone with an image attached using Windows Messenger (if that's possible)
I did find a computer with XP, but for some reason P2k Commander does the same thing, as soon as you select the appropriate COM PORT, the motorola modem driver disappears from device manager. This software seems REALLY touchy and I just don't know what to try next. I've tried many versions of P2k as well without success.
It seems that the wiki links are all nonfunctional and I can't seem to find it via search, so please help.I just got a used W385 and all my daughter wants added is games.How do I add it via the USB cable (Tried the latest Moto drivers but doesn't seem to work) and get it working on the phone?
View 1 Replies View RelatedI'm using a Motorola W385 and need to know how to change the way you answer a call.Right now when it rings the phone number shows up on the front, (when closed). When I open the phone it automatically answers the call. I want to change it so I can open the phone and then push "any button" before answering. I thought I read it in the users manual but now I can't find it.
View 2 Replies View RelatedI don't know how to appear my inbox at the email setup. It only shows me the sent messages and doesn't notify me for incoming emails...
View 2 Replies View RelatedMy BB is synced to my Outlook account using BES.If i have any rules set up for folders in my Outlook Inbox the e-mail does not get sent to my BB.
View 2 Replies View Relatedhow do i put opera mobile on a stright talk w385, i cant tell where i would put it when im looking thru p2k commander and i cannot download throught the browser and if it makes a difference the phone is on pageplus now not straight talk anymore, also how do i turn off the text conformation thing that i get when i text someone on verizon
View 1 Replies View RelatedI wrote a post here before realizing that the thread trail (Home -> Forum -> Canadian Carrier Discussion -> TELUS Mobility -> CDMA Network and Devices) was pretty narrow, and the thread itself seemed bloated.So I moved it here. I've done a bit of the "intro" stuff: up/down-loaded pictures/ringtones and changed the cover display, so i'm pretty familiar with p2k Commander. But, like some other folks (and as i say in my post) i found either myself incompetent or the software lacking. Regardless, I've experienced some success with this direction so i think i'm gonna take it as far as i can.
View 6 Replies View RelatedI have a W385 flashed with the verizon flash on pages plus.when it opens, all it does is display the file's info?I don't think Java is installed on this model.I can't seem to find out how to install java using Pplus.At this point I'd be willing to pay someone to help me via skype chat.
View 1 Replies View RelatedMy friend SWIM has a Straight Talk Moto W385 and he wants to change the clock to 24hr time format.SWIM is using PST. After starting PST, SWIM creates a new "feature file" and reads the data from his W385 handset. SWIM changes the clock format setting to 24hr and saves the file. Then SWIM tries to write the data back to his handset, but PST prompts SWIM for a subsidy unlock code.
SWIM has no idea what his subsidy unlock code is, nor does he know how/where to find it.How can SWIM either:
A). Get the magic code to finish this process via PST?
B). Make the 24hr format change using another method?
At work we have wifi that requires a username and password (our network user/pass), but when I try to connect to it with my milestone, it only prompts for the password, any idea how to set this up?
View 2 Replies View RelatedMy wifi network requires that I enter a user name and password. Is it possible to connect to a network with user name? Can I just change my profile name on the device to be my user name.
View 6 Replies View RelatedUsing GB, every time I activate GPS in settings it asks me if I agree to the terms. I can avoid this by using a third party widget to activate GPS. But is there any way to get the warning agreement to take the first time and not have to see it each time I use settings?
View 2 Replies View RelatedAt home I have a wireless router and a modem. When accessing the internet via a netbook running Windows (XP and 7), I first connect to the router and then log-on to the ISP, which I've set up as a network connection with the relevant username and password.Despite a favourable tariff for data, 3G connection here is not great. So when at home I'd like to improve browsing speed by linking to the broadband/DSL. So far I can get it to connect to the router, but I haven't yet found a way to log on to the ISP, or even somewhere to put in the account details.I'd be very grateful if some kind soul could point me in the right direction in how to configure my phone, which currently appears to be smarter than I am.
View 1 Replies View RelatedThe Flash 10.2 app just updated but says that it requires Android 3.0 to update. I thought that Honeycomb was Android 3.0 so I'm confused. what this update is supposed to actually do when functional?
View 3 Replies View RelatedI lost my data signal AGAIN while uploading a picture from Facebook. Now I have this orange triagle in the upper left corner of my screen and on the drop down menu is says "Download requires network" which I can not get rid of.
View 2 Replies View RelatedI do not want my contacts stored ANYWHERE except on my phone and on my laptop (Outlook; not using exchange server).However, when I try to create a new contact, the phone asks me to select a gmail account.It does not offer any option to select something other than a gmail account.I have accessed all menu settings and have limited my gmail accounts to only syncing gmail.There must be an option to create a new contact without linking it to a gmail account.
View 7 Replies View RelatedI have recently switched to a XPRT and have been having a problem with the phone audio (speaker, earpiece and mic) that requires me to reboot the phone EVERYDAYAll other audio functions work properly. Speaker for music, notifications, phone rings...but when i try to make or receive a call, there is no audio on my end (whether on speaker, earpiece or bluetooth) and the microphone is dead as well.The only way to resolve this issue is to power cycle (reboot) the phone. THIS HAPPENS EVERYDAY!
View 15 Replies View RelatedEver since I got my Xoom back from the 4G upgrade I have a problem with no internet access and generally a restart seems to wake it up. is anyone else experiencing thisIt might be my routine combined with geographic locations at specific times (e.g., commutting.)
View 2 Replies View RelatedI went to update my profile since I saw the message that they had separated the tablets from the phones.Not quite.They still require you to enter a serial number for your phone or you can't save the profile.Even though I'm not using a Motorola phone.I put the tablet serial number in there and it took it. So I put the tablet serial number two places.No harm done just irritating.If they aren't any smarter than this that they can't even organize a logical personal info sheet where the entries pertain to what you are entering info about ... what kind of stuff are they making?Incompetence really torques my jawInfo sheets for phone users should be COMPLETELY SEPARATE from info sheets for TABLET users, not combined
View 6 Replies View RelatedIs there a way to connect to a bluetooth device that requires a code to be entered? I am trying to connect to my Microsoft Sync radio so I can stream music. The MA detects the Sync but when I click on it it just says connection fails. The Sync requires that you enter a code so I assume this is the reason for the connection failure.
View 1 Replies View RelatedTaking a screen shot requires holding the power and volume down buttons for a few seconds. Couldn't it be done by just pressing them? Also, it should take the screen shot when the buttons are released. As it is now, everytime I force a reboot, I also take a screen shot.
View 2 Replies View RelatedI've just bought a Nokia 5800 handset recently. It seems to me that even though I actually saved a contact's number in my phone, when he messages me the phone inbox only shows his number and not his name, even though I already saved his number under my phonebook.
Is there anyway to solve this such that it'll display his name instead? Its kind of pointless if I have to keep checking back to my phonebook to see who has messaged me, since I don't remember my friend's numbers and stuff.
On a note I saved all of my friend's number without the region number. That is as im living in Singapore, a contact's number would be saved as follows: 91234567 without the region code of +65. Thing is in my inbox all the phone number displayed shows the region code of +65 along with the number, but seriously even my super old phone can recognise that both 91234567 and +6591234567 are of the same person and displays the name correctly in the inbox.
So I set up my gmail account via the BIS or whatever plug-in, and all seems to be working ok. The problem is that the emails go straight to my general "Messages" inbox, but nothing shows up in my Gmail account inbox when i click on that specific icon. I do have SMS/MMS broken out into a separate inbox, but i'd like to use the gmail inbox where it threads messages with the same topic instead of the general messages inbox.tried resending service books.
View 8 Replies View RelatedI don't know why this happened, I woke up this morning and it was like this. Whenever I try to open my email inbox the SMS inbox opens. Even if I go directly to my individual accounts on my BB (yahoo and gmail) and try to open them directly, it still opens my SMS inbox. I can't figure this out and can't find an answer. I have to check all my emails my going onto a computer. I still get notifications of new emails on my BB, but can't view them because only the SMS inbox will come up. I need my email inbox to show when I click on my email inbox.
View 2 Replies View Related
