I have a SA for when I'm in the house. Trigger: Detect my wifi, then: Disable Cellular Data, Turn on blue-tooth, dim brightness to 45%, lower ringer volume, But when I leave the house, I want it to Turn Off Wifi and enable Cellular Data. Is there a way the SA can detect that I am not connected to my home wifi and disable wifi and enable Cellular Data, or just enable one SA and disable the active one?
View 9 Replies
Is there any talk on including a new action to turn off/on LTE? Turning LTE off automatically when battery is low can really help save on battery power.
View 4 Replies View Relatedi have set up the pre formated sleep mode using the time trigger, however, each night it shuts off before the set time. i have the night trigger set from 11pm to 1159pm everyday, the morning trigger set from 12am to 7am everyday and the weekend trigger set from 701am to 9am saturday and sunday. sometime in the wee hours of the morning it shuts itself off in the middle of the morning time frame. ive checked my phone at 3 am and 5 am to find the smart action has shut off. i have to open and close smart actions to get it to come back on. ive deleted the action, cleared cashe and started over, deleted and started from scratch and used the pre formated sleep mode. i cant think of why it stops working.
View 1 Replies View RelatedI have settings for home and when I am bellying up at my local bar trying to get my Guiness on, the Smart Action is not smart enough to know I am 2 miles away from home. Is their way to tweak the geo-profiling?
View 1 Replies View RelatedI have an action set up to start the Pandora app whenever my phone bluetooth connects to my truck. For some reason, today the action is active while I am at home and with no bluetooth connection. I rebooted the phone, but the action starts up again. Having the phone's bluetooth on or off doesn't seem to make a difference either. I tried toggling airplane mode on/off with no change. I tried deleting the Action and creating a new Action with the same results.
View 3 Replies View RelatedI typically keep my phone on vibrate, I rarely turn on the ringer. I have a Smart Action setup for night time which turns the ringer/vibrate off to silent. I also have a work Smart Action setup which sets it to vibrate (just in the case I had turned on the ringer at some time). It seems that when these Smart Actions turn off (which the work one tends to do even when I'm at my desk at work, but that's a location issue talked about elsewhere) they tend to turn the ringer on to full volume even if I had it set to vibrate only beforehand.
View 1 Replies View RelatedSince the .893 update has come out and the smart actions app from the RAZR was not in it. Does anyone think we will ever be getting this app in an OTA? This is one app that seems like it is useful.This would at least be a little bright spot in my rather abysmal Bionic "experience".
View 6 Replies View RelatedI saw that there was an update to Smart Actions yesterday in the Google Play Store. When I tried to apply the update, I received a message that there was an error downloading the update. I could not get this message to clear, so I tried uninstalling the previous updates and then re-applying the updates. Now, I get the message "Your order is pocessing, your item will be available in a few minutes." I have cleared cache and data for the play store and rebooted my Droid Razr several times, but I cannot cleare this message. Anyone else experiencing issues with applying the latest Smart Actions update?
View 11 Replies View RelatedI just noticed my SAs were wiped out with the update. Not a biggie but also not expected. I do see where they added some SAs and UI changes with the update.
View 7 Replies View RelatedI am trying to setup a rule with smart actions to look at the wireless i connect to as a trigger then change the volumes of the phone when it detects my work wirelessProblem is smart actions only allows me to change the ringtone volume i need to turn down the notification volume as weel but there is no option for this WHY?
View 1 Replies View RelatedHave just bought a new UK RAZR XT910. Have set up smart actions and have them enabled, but no matter what I do, disable, re-enable, delete, re-create, reboot, check DST time settings, nothing works.Can someone please tell me where I am going wrong.
View 4 Replies View Relatedi have the motorola razr uk version but my smart cations app wont activate / deactivate the profile when it should, im having to do it manually. its version 1.0
View 1 Replies View Relatedif you set something to happen on a certain Day between a certain time the phone just ignores the fact that it's the wrong day to perform that action and just looks at the time ?
View 4 Replies View RelatedBeen trying to set up some rules based on recomendations from this vid url...where they suggest using the Smart Action trigger for "Motion Detector" to save battery, and which looks pretty useful!However, I have a UK version of the RAZR and the Motion Detector feature does not seem to be enabled! Why is that? Is there a way of enabling it? Whilst I am on this topic I was also wondering if there is a way to restore the Smart Action Samples, as I managed to delete a couple of them accidentally.
View 4 Replies View RelatedOn my Razr Maxx I could select 'play playlist' as part of a smart action. My Razr Maxx HD doesn't have that option. It does have a 'play music' option but when selected it says no playlists found despite their existence on the sd card and in internal memory.
View 6 Replies View Relatedhow to trigger a Smart Action using the "double-tap" feature of the Home button? I would like a Smart Action to trigger the Vehicle Mode on my phone. I know that there is a blue tooth trigger to do so, but I do not have any blue tooth devices.
View 5 Replies View RelatedI've tried pressing the home button and the on/off button to disengage auto lock. Touch screen is still dead.
Info:
iPhone 4S
I have started getting a problem with the auto brightness switching itself off.
I keep switching it back on and then after a periods of time... Can't be specific but when I come out of an app or having been watching a video and go back to the homescreen it's really bright and the auto setting is off again.
1- when i'm using the device by itself, all indicators show that auto-switching is working when wifi is available. ok, bb gurus, i can't afford any surprises on my bill, so...is it really working all by itself, or am i gonna have to play the "disable this, enable that" game to make sure?
2- when i'm tethered, i see my device is being used as a standard dial-up modem, so clearly there's no wifi to be had. but...during tethering, is there any hardware config that allows my device to become a wifi adapter instead of a modem?
3- i think i don't have hotspot capabilities, is that correct?
btw-i absolutely love how easy it is to check service/connection status.EDIT: i just noticed that when i have wifi, the ssid shows up next to the "AT&T" on the main screen, i walked back & forth across the street and watched it change...holy-moly i'm digging this phone!
Aside from having Mr. Blurrycam over for a party, is there an app (perhaps via Android SDK like DDMS) that allows me to get a real-time streamed Atrix screen on my PC so I can record videos to demonstrate operation of an app?
View 2 Replies View RelatedI am wondering if when I start an app if that can be a trigger in SA. For instance, when I use My Tracks I would like SA to shut off the wifi.
View 2 Replies View RelatedWe have not seen any releases recently for bug fixes, and support is all but non existant anymore. Tons of features that dont work as advertised. I know they are legally suppose to support repairs/parts for a period of 7 years or so, so I am sure there is some sort of legal obligatioin to deliver a product that functions as advertised.
View 4 Replies View RelatedAfter upgrading to ICS and being forced to do a FDR, I eventuallly realized my Smart Actions were no longer woking properly. I deleted them and was adding them back one by one. The ones that are not location-based work okay but I cannot actually get a location trigger to save. I press on Location, it shows me my one location I have set up right now, I select that one, press done to go back out to the smart action page, but the location value is not set. I tried clearing the cache, system and app, already but nothing changed.
I just realized I can set a location if I am not editing a sample action. Starting with a blank rule, it works but I still hae so save the action and then save the trigger.
Is there way to send myself an email if I miss a phone call?When I'm at home my razr max is hooked into my housephones with xlink. Both the cell phone and xlink are located in a closet. Every once in a while a call doesn't go through to my house phone or answering machine - just my cell and I end up not know about the call for quite a while. I always have email turned on so I thought having my cell phone email about the missed call would be a good way to be notified. I tried texting to my gmail acct but smart action is looking for a phone number to send the text to.
View 1 Replies View RelatedI very recently purchased the RAZR MAXX after much research and reading regarding the phone, battery life (of course), and the Smart Actions feature. Thinking that I can downsize from two smartphones into one. Unfortunately, this is not going as well as planned.I am a small business owner and needing the ability to silence the ringer on incoming calls; except for those from certain contacts that I need to be audible after-hours...I've gone into Smart Actions and done the following:Create a new rule "from scratch" named "After Hours"The only trigger is "Timeframe" and specified as the following:
Mon, Tue, Wed & Thu from 8pm until 8am.Fri from 1pm until 11:59pm.Weekends: Sat & Sun (all day)Actions are specified as the following:Ringer Volume is specified as "Silent"VIP Caller Mode: and the specified contacts I wish to activate an audible ringer during the specified times listed during the timeframe trigger are in this list. Ringer volume is set to MAX and the vibrate option is selected/active.The rule has been successfully saved and is showing as being active as we are currently in the time specified for this rule to trigger.Now the heart of the issue: After receiving a call from a number that is not on the VIP list, my RAZR MAXX will no longer sound an audible ring on ANY incoming calls until the "After Hours" rule timeframe has passed. This is including calls from individuals that ARE in fact, in the VIP caller list...
My personal mobile is in the VIP caller list as a way for me to test the audible ringer. A test call from my mobile phone does activate an audible ringer and the phone vibrates.Now, if I receive a call from a business customer while the After Hours rule is activated, of course the phone does not ring nor vibrate. The phone only lights up for the duration of the ring time until the caller is sent to voicemail.After receiving the call from the business customer, I placed a test call from my personal smartphone. Incoming calls from this my personal mobile WOULD trigger an audible ringer previous to receiving a call from a number that was NOT on the VIP list. Now, the phone remains silent, no vibrate alert, no audible ringer. The phone only illuminates until the call is routed to voicemail.
I've tried basic troubleshooting: uninstall updates and reinstall updates for the Smart App. Have deleted and recreated the Smart App rules. Restarted the phone. Nothing seems to work...Could someone please give me a clue as to what may be the "smoking gun" for this. A quick search of the web features others that had mentioned the same issue with their handsets but no real resolution to this problem. And, I really would like to be able to use this feature of the new device, otherwise I just purchased a new $300 phone to carry around beside my Droid X. In that case, I may as well just return the MAXX and return to my previous Droid X.
SmartActions: How do I toggle notification LED?
View 4 Replies View RelatedI have a Atrix HD. The app used to mostly work, now I'm having major issues. Everytime I try to change any setting, the app crashes and I just get a message "Unforunately, SmartActions has stopped."
There a fix for this so that I can make changes or this app is no longer supported?
I have set up the SmartActions app with the Caller ID option set up for phone calls only, no text messages. I have the Motorola RAZR MAXX HD paired with a Motorola H720 Bluetooth headset. Is there a setting that directs the announcement of an incoming call to the Bluetooth device only? I don't want to announce to the world that I have a call coming in via my phone speaker.
If my Bluetooth is turned off, I would expect the audio to be directed to the phone speaker. But if my Bletooth is on and active, shouldn't the announcement go to the Bluetooth?
I want to create a rule to set the phone to ONLY 3G when the display is off, saving battery. If I'm not using the phone, I have patience. I'm less patient when using the phone and want 4G.
View 1 Replies View RelatedThe 3 action buttons at the bottom of my phone are intermittently lit. What is causing them be off at times and on at others?
View 3 Replies View RelatedWhen I'm in an application that tries to open up a web URL (Google+, Twitter, other apps), I get prompted to "Complete action using" Browser, Firefox, or Opera Mini.I click the check box saying "Use by defauly for this action", but every time I click a link, I get the same prompt.On some URLs, when it redirects, I will get the message popping up three times in a row.I went to home -> settings -> applications -> manage applications -> all -> Browser and "Launch by default" says that I have "selected to launch this application bt default for some actions", but I can't see what they are. Shall I just try clicking the "Clear defaults" button there, then reassociating Browser?
View 11 Replies View Related
