I have a Razr HD on Fido in Canada, due to the horrible stuttering it had it was suggested I do a hard reset to fix it. After doing the hard reset, it's now in an infinite loop of the android update logo (green android with the spinning blue thing), then the motorola logo, then a black screen.
View 6 RepliesSo my LG G4 randomly shut off and when I tried to turn it on that's what started to happen I tried hard reset many times no luck doesn't seem to have worked because the problem persists.
View 4 Replies View RelatedI got an OTA update notification for 5.1 I downloaded and pressed install. It prompted me for a restart which i did. My phone has a setting which required me to punch in screen lock code everytime my phone restarts. Now, after restarting, it asks me to punch in the screen lock code. After punching in screen lock code, its stuck in boot animation loop ### Read some posts online and they mention " unlocking bootloader before updating. What is bootloader ? How do i check if my boot loader is locked or unlocked?
I tried to boot in recovery mode and it shows me " No command" ... I wiped cache partition through recovery mode- still no luck. It's stuck in boot loop..
Like others, I tried the software update, and then my phone constantly got stuck at the four little circles at start up. I followed some instructions I found on AndroidPit:
1. From a powered off state, press the Power button to start your Nexus 5. When you see the Google logo press and hold the Volume Down key and release when the device vibrates.
2. Use the volume keys to highlight Recovery Menu and press the Power button to select. This will bring you to a screen with an Android on its back.
3. Hold the Volume Up key for 5 secs then release and a new menu will appear.
4. First off, you can use the volume keys to select Wipe Cache Partition. This will cause your phone to restart. once this is done, re-do the previous steps to get back to the same screen (the one that Wipe Cache Partition was on).
5. Highlight Wipe Data/Factory Reset and select using the Power key. Scroll down to Yes, Delete All Data and press the Power button again to select.
6. Your Nexus 5 will now wipe your data and reformat.
7. On the next screen hit the Power button to select Reboot System Now.
It has been 40 minutes now and it's stuck on 'Formatting /data'. Is this normal?
I've only had this phone for a couple of months and it was functioning perfectly until now I haven't rooted it or anything.
Its simply is that when I press the fingerprint sensor to bring the screen on, it starts yelling 'Swap too fast/too slow' bla bla bla BEFORE any actual fingerprint scan and it keeps doing it until I pres the sensor again to turn screen off. Tried disabling and enabling it, cleaned the sensor hardware gently but nothing has helped so far........Its Atrix 4G (till 4G i assume all parts will already go, just 4G will be left) on gingerbread 2.3.4...GB version.
View 4 Replies View RelatedI am having a very strange problem with the fingerprint reader. The problem started occasionally, but now is almost permanent. When at the lock screen, without even touching the sensor, I get the message "Swipe was too fast". It will instantaneously flash back to say "Swipe finger sensor", but usually flashes back so quickly to the "too fast" message you can't even see the "swipe" message. This pretty much prevents it from reading my finger swipes, although every once it a while I can break in.
I have tried many power cycles, pulling the battery, cleaning the sensor, all with no luck. In fact, I can do a clean power cycle, never touch the finger sensor at all, and when it finishes booting, it is already in the infinite loop. I even tried forgetting all fingerprint settings and re-registering, and most of the time as soon as I got to the screen to start reading my swipes, it would register all illegal swipes even before I ever attempted one. (After many tries, I was able to finally get through the re-register step).
To me it very much feels like a hardware issue with the sensor, but I'm wondering if anyone has seen anything similar as my searches have not turned up anything quite like this problem.
I have a fairly stock Atrix, build 4.5.91, with a decent share of apps, but no lauchers, lockers, task killers, and nothing in the auto-end list.
Since the Razr lacks the ability of a battery pull, when needed, how do you go about doing a hard reset
View 2 Replies View RelatedWhy is my Home Screen still the same after hard reset? the position of the widgets and stuff.
View 4 Replies View RelatedCouple weeks ago I updated my phone to a windows 10 preview (I forgot the build number) and it installed fine. As expected there were some bugs, so I read online on how to fix them after restarting my phone and doing a soft reset, it didn't work. I then had to do a factory reset- or a hard reset. It then threw my phone into a perpetual state of spinning cogs and a never-ending battle that is so close to lost I can feel the defeat seeping in like a plague. I've connected it to my computer to do the NSRT but my phone only sees it as a power source. I've taken the battery out, brought it to the Microsoft store, and I've even tried to hack into it via computer. However the same problem shows every time:
View 1 Replies View RelatedAfter the update to 2.2.2 and after a hard reset, the phone takes a long time syncing my Google accounts e-mails. Is there a setting that i have missed ? I am on a 3G data plan. Before when a new e-mail was received in the Gmail inbox i instantly received a notification on my phone.
View 6 Replies View RelatedIt goes from lockscreen to black over and over until it dies. It is jailbroken on iOS 5.1, tried restore and DFU and those do not work.
Info:
iPhone 4, iOS 5.1, white
I tried to hard reset my LG G3 device. Following the Volume Down + Power Button instructions, everything was looking well. I confirmed to reset the phone and since then, the phone's been rebooting itself automatically without moving further than the LG logo screen.
Turns on, LG Logo and turns off immediately after. I tried taking out the battery but once I turn the device back on, the process keeps happening.
Just purchased a used Curve 8530. Previous owner could not remember the password so after going through the process of too many tries and a wipe of the system, the phone now will not boot up. Get an hour glass and then a quick screen flash before it starts the same routine. When I try to connect to Desktop Manager it keeps connecting and dropping so I am unable to reload software.
View 2 Replies View RelatedOne morning my torch 9860 didnt start and ended up in an infinite restart loop, the LED turns red for 6 seconds then is goes out, and then again red LED then goes out. Screen is always black. I've tried with JL_cmder and BBSAK but it wont recognize the device. I tried to catch it with AppLoader, and I can do the UNKNOWN PIN thing, but then when the JVM is starting to initialize again it will go into an infinite loop again.
View 2 Replies View RelatedI have a Samsung Galaxy S6. The phone updated to 5.1.1 and after that the phone prompts to update security settings for email account. Then it will take you to a phone encryption screen and the encryption reboots the phone, but then keeps looping. I do have an exchange account and our company requires to have encryption on the phone. I just installed the Nine Exchange and it is working without any issues, but how can I fix the other way I access email?
View 3 Replies View RelatedThe wife and I both have Razrs. For some reason, I got the notification to update to ICS, she never did. So, when you go to system updates, you can download ICS, but when you procede to update, it gives the attached message.
View 3 Replies View RelatedNo Service since JB Update
View 2 Replies View RelatedMy phone randomly shut off and then I when I turn it back on. the infinite boot logo appear. I installed clockworld. tried to reformat everything and reinstall stock image and still nothing.
View 7 Replies View RelatediPhone 3G with iOS 4.0.1 firmware
Jailbroken with RedSn0w
It had been working fine until this morning when the iPhone is now stuck in the loop of restarting and stuck in the Apple logo screen.I have tried to hold both the sleep and Home button to reset. But, it just goes back to the same loop.Since the iPhone does not reach the Passcode screen, it is not even recognized by iTunes. So, I cannot restore it, either.How should I proceed?
I'm currently with Rogers in Canada and looking to jump ship to another carrier. Can I still get the Jelly Bean update if I'm with another mobile provider once Rogers comes out with the JB update? Would Motorola have the update online to download?
View 14 Replies View RelatedToday I received a second-hand iphone 3GS to replace a 4s which I lost.
Upon receipt, the phone displayed an image of a usb connector and an itunes logo suggesting that I need to connect to itunes before use.Â
When I attach the phone to a toshiba satellite C50 laptop it connects and immediately disconnects with an audible tone. This connect/disconnect cycle repeats every second or so and never ends.Â
If I connect the phone whilst powered down, hold the power button and home button together for 10 secs and then hold the home button only to enter restore mode, the phone connects to itunes and I get the option to restore. However, the restore always fails.Â
I have tried connecting using two seperate USB cables - I am not sure if either is genuine. There is no effect.Â
I have tried disabling USB controllers individually within device manager. There is no effect.Â
I have tried different USB ports/ There is no effect.Â
While connected, the phone appears in the device manager intermittently, appearing and disappearing as the phone connects/disconnects.Â
The laptop is running windows 8.Â
Info:
iPhone 3GS
So frustrating that the 950 is not a top end phone. The problems with having to do a hard reset in order to get the update is a joke. I've done the hard reset and my update is just sitting at 0% it won't do anything and my phone is just now going slow. I expected a lot more from MS. The batter gets ridiculously hot, it drains way too quickly, and there are other glitches as well. This was marketed as a high end phone but thus far it is no where close.
View 4 Replies View RelatedMy friends iphone 4 left his phone charged and suddenly his phone shut down and cant be on anymore. it is all blackscreen ... the blackscreen is like when ur phone is off. my friends phone can go to DFU mode i tried restore it using itunes. but it keep give me error code and i have try to solve all the error code but it still cant works ...
Info:
iPhone 4, iOS 4.3.2
I need to know the correct procedure to update the Sony Xperia Z2 from KitKat to Lollipop.These are the main questions:
1) Update via OTA or from PC Companion when the firmware is noticed?
2) When the hard reset (system repair) must be done? Before the update or after the update or both?
3) How perform CORRECTLY, STEP BY STEP, the hard reset after Lollipop update?
Â
I and all Z2 users need this fondamental informations to prevent Lollipop bugs or malfunctions!We wait DETAILED answer from Sony!
Maybe this has been asked but is their a way to allow continuous looping of the home screens? Like when you are on the home screen you can swipe to the right to get to your last home screen vs only to the left. Also can you just only swipe one open app to delete under resent apps or can you delete all at once.
View 4 Replies View Relatedsim puk1 locked how do i hard reset when locked?
View 1 Replies View RelatedI had to reset my Razr back to factory settings. I was adding everything back to the phone and when i got to Motocast. I tried to login with my account and all my phone says "An error has occurred. Please try again."
View 1 Replies View RelatedI have a milestone which is almost the same as droid. After I installed 2.3.3, the hard reset doesn't work. X button, through to menu etc it shows instead Err:A5, 69, 4E, 00, 2F. Batterey Ok, ok to programm etc. Bootloader is 9.78
View 3 Replies View RelatedI do not get the normal fastboot screen I get an all black screen that says AP fastboot flash mode (s) OA.63
I did volume down & power at the same time and this is all I ever get, am I going to have to take it to a store tomorrow
I just recently tried to turn on my phone and it just wouldnt work. It turns on when I plug it into the wall, but only the motorola sign shows up. I tried doing the hard reset by holding down the power and camera, then plugging it in to turn it on, but it only shows the motorola logo, then the screen turns black, then it starts up again to show the motorola logo. Im thinking its either the battery or the software
View 4 Replies View RelatedI have often been in locations where it is too bright and the led to illuminate the menu, home...buttons stay off, but it is dark enough to make them dificult to find. Is there a way to have the buttons go to a half brightness position as long as there is any tactile responces being detected on the phone?
View 1 Replies View Related