( player that does not see the SD Card. I'm trying to convice the doubleTwist developers that it's THEIR issue. They have so many users going through hoops to describe their problem and give them details without really fixing the problem. It's been about 7 months since the first issue was reported to them. And of course, most users are jumping ship and requesting refunds.
View 2 RepliesI am trying to set up double twist on my new s5, so I installed and found when I was syncing the music from iTunes I ran out of hard drive space on the phone. I purchased an SD card, transferred music files over to it, but I now have a new problem.
When I go to sync double twist again, it attempts to rewrite all of the files to the main hard drive instead of the SD card, in effect duplicating all of the files. Is there a setting I can change to force the files to write to the SD card?
Since installing ICS I cannot connect to Double Twist. Whichever of two options (MTP and Camera Mode) I try it will not connect. On gingerbread you had different USB connection options. How to connect to Double Twist or tried it?
View 1 Replies View RelatedI put a couple of albums on a Mirco SD card and inserted it into my Xoom.The card shows up under /mnt/external1The albums are there and I can select each song individually and play them using the default "Music" player, RockPlayer, or Winamp.What I can't figure out is how to get any of those Media Players to read from the SD Card automatically?
View 5 Replies View RelatedI have an SD card the says "MICRO HC 8GB co8G Taiwan". It has a little circle that has a "4" in it. My Droid X2 is reading it as a 4 GB card and says it's full even though most of my apps are in the internal memory. When downloading app data it says there's enough room. When I removed the SD card, there are a number of apps that are checking as being on the SD card. When I "Move to media area" it changes to "Move to phone" which suggests that it just move the app to the SD card...which in not in the phone!
Is this a programing problem with the phone where it's not finding the SD card at all, or is this a faulty SD card?
I am getting double notifications for my text messages on my droid2. I have verified that I have turned off notifications (including default SMS App) on all but SMS Pop. Yet I keep getting 2 notifications 1) is using the message notification I set in SMS Pop and the other is the default notification sound.
How do I locate / kill the app making the default sound!?
I've got a Droid X. After I upgraded to Android 2.3.3 I am no longer able to silence incoming calls by double tapping the screen or turning the phone screen side down?
View 6 Replies View RelatedAm I the only Droid 2 who is sending double txt messages? And I think it know why its been doing it on the two phones I've used. If you start a message with the touch screen, you get lazy and open the keyboard and finish the message. Close the screen after you click send. 75% of the time you will send a double text message.
View 3 Replies View RelatedRecently got the .602 upgrade and noticed the double tap home launch isn't working, at least on my phone. Is this a new issue, or was it a problem previously? Have tried all the options available, but none seem to work. This feature can be accessed by going to Settings>Applications>Double tap home launch to choose your option.
View 5 Replies View RelatedI've tried apps and looked through my settings and nothing seems to work either that or I'm over thinking so in turn over looking something....
View 1 Replies View RelatedI replaced my cliq with the cliq 2 today. When I moved my 2gb sandisk sd card into my new phone, the phone was unable to recongnize that it contained the card. It worked perfectly fine on my old phone, so I put it back in my old phone, transferred the files from the card onto my computer to save them, and then formatted the card. I put the card back into my new phone and it still doesn't recognize it.
View 10 Replies View RelatedCan anyone shed light on the SD card issue.Was it activated as read only on purpose or is this a bug. Will everyone be satisfied with a read only SD card?
View 2 Replies View RelatedMy photon does not read the Micro SD card. This problem has been there for 2 months. I never had a need to use the Micro SD card so i did not bother.
This seemed to happen since the last software update. Before that, it worked fine.The phone simply does not recognize any Micro SD cards. I tried 2 different micro sds and the same thing happened.
The buttons where it says"Mount SD card" are always disabled(shaded). And the phone does not let me erase data from SD card either.I tried the reset from Privacy>Factory Reset. Same thing happened. It reset the phone but it still does not read Micro SD.
i updated my cliq2 system to 1.1.30 yesterday.But mobile can't read the SD card.I have two SD cards.One is the original 2G sd card,the other is kingston 8G sd card i bought previously.
I am sure of the 2 SD card is OK.i can use them in my PC.And i tried them in my friend's phone.They can work too.Then i formated them.But still can't be read in my 1.1.30 Cliq2.
Now i set my Cliq2 back to the 1.0.23 system again.phone can read SD card right.
As of Friday (yesterday), my external SD card (32Gb) is being mounted READ ONLY by the system. I cannot use any app on the XOOM to write files, or move files, on that card. I have tried andSMB, andFTP, Astro file manager, andExplorer, File Manager HD. I have taken the card out of the system and reformatted it using the SD formatting utility from the SD association on a PC. I have tried another (2Gb) card and the same problem exists. Both cards work flawlessly using a card reader on a PC.
I can write to it only via an MTP connection to a PC. Today, the card is labelled "SD Card" under MTP. Before yesterday, it was "External Storage". Before yesterday, I had no problem using either andSMB or andFTP to download files to the SD card. I am assuming there was something in a recent update that has removed this feature from my device. When I got the device, it was at 3.2. Now it is at 4.1.1.
How do I get this card to mount R/W so I can actually use it on my device as WRITABLE STORAGE, like I was allowed to do just a week ago? How do I get this device to stop magically updating itself, so I can prevent you (Motorola, Google, whatever) from removing functions that I have already used, need, and expect to continue working? I actually don't care if an update is what broke this or something else, I do not want automatic updates enabled, and I can see no means of preventing them, other than giving up WiFi capabilities permanently. This is a XOOM Wi-Fi.
I just got my Xoom WiFi back from Motorola repair - it somehow had a latin american ROM on it and wasn't receiving the ICS upgrade. Well now it has ICS and, for the most part, everything is fine. I am having problems with the SD card though. This is an SD card I used when I had Honeycomb on the unit. I was able to write to it just fine back then.
I took it out before sending the unit in for repair, and I put if back after receiving the unit back. After reinsertion, I can see/read all of the files that I had on there from before, but I cannot write/edit/delete anything on it, and when I look at it in a file manager, it shows up as read only. I removed the card, put in in my PC (with an adaptor) and reformatted it, still read-only.
While it was still in the Xoom, I connected to my PC and was able to access and even write to the card from my PC. But I still cannot do anything that attempts to write to the device from Android. I think the ability to write to the card from the PC indicates that there is not an issue with the card. I think the issue is how it's mounted. But I cannot find a way to mount it as writable unless I root my Xoom (which I'd rather not do).
Using K9 to monitor my msn.com account, when I read an email on the PC it does not change the status of the email on the Droid to show as read. Same issue the other way, if I read an email on the Droid the same email shows as not read on the PC.
Is there a setting some place within K9 that will mark the PC email as read and allow the sever to mark an email as read on the Droid?
how to disable the auto text read back while in the car dock. There's no way to reply. I have a command one Bluetooth that works with motospeak so that I can be hands free while driving. The auto read out function over shadows this, making it worthless.
View 3 Replies View RelatedNew Turbo, running 4.4.4 and can't find a way to mark all mail as being read. Haven't been able to find an answer anywhere.
View 12 Replies View RelatedOne of the most annoying things about the GB update is that the icons in the status bars are to hard to read.Especially in the car dock I cannot tell is I have a text message or an email or WTH is in the status bar.
View 3 Replies View RelatedI profess to being a newbie to smart phones.. but this is strange... I can see all of my songs on the default media player on my atrix... but when I try and upload the files through the Motorola portal (from phone to pc) not all of the songs are there... There are none on the internal storage drive.. Where are they or why are the files not read on the sd card?
View 2 Replies View RelatedAble to get their turbo to read texts while driving. I think I have it set up correctly. I do use handcent.
View 24 Replies View Relatedyou installed 5.1 believing the hype that latest means greatest and found out that 5.1 is not better than 4.4.4, simply different. You found out some of your apps don't work, your battery life took a hit for the worse or even your hardware does not perform as well as it did on Kitkat 4.4.4. If you installed the OTA for 5.1 and you are happy, this is not directed at you; just continue to enjoy your new OS. I have taken the time to read from many different sources and viewed several videos on You Tube that test side by side Kitkat 4.4.4 vs LP 5.1 and it shows conclusively that Kitkat out.
If you know for a fact that LP will offer you something specific that you need take the plunge but at least take the time to check what LP will mess up that you are now enjoying on Kitkat, the information is out there easily found, in closing: if you are sitting on the fence and have not yet taken the 5.1 OTA read and view videos so when you make your decision at least you will know what you will be getting and losing.
Does anyone have a problem (perhaps since .905, maybe an update before that) with Text Messages not being shown as being read after you've read them? It is getting really annoying... I get a text message, I read it, and I go to look at a new text message and there it is looking all Unread! It may even make an indicator appear in the top bar (but I'm not 100% positive about that). I've seen this problem arise on PC's in Outlook, but it's definitely never been a problem of mine with cell phones before.
View 3 Replies View RelatedThe first time I used my Droid Razr with the Verizon Car Dock and got a text message it popped up the option to listen, and read me my message. The 2nd time (same day) I hit cancel after I heard the message and since then it will not pop up and read me the message anymore. The only topics I can find on this are how to turn this feature off, I like this feature and want to know how to turn it back ON.
View 5 Replies View RelatedI have an issue using the "double space to insert period" option on the physical keyboard of my Droid 4, which was recently updated to Ice Cream Sandwich. This is the pegged down description.I want the virtual keyboard default to be Motorola's, not Swype. (Not a Swype fan, evidenced by my desire for a physical keyboard phone to begin with.) I also want the options of auto-correction and auto-capitalization turned off for my physical keyboard.I cleared out the cache/data settings for keyboards several times and tried many combos, and came to the following conclusion: If "Show word correction suggestions" for the Motorola virtual keyboard is on "always show" then I can double-space to insert a period and also have a space between that period and the next word. Everything works fine.
However, any other option besides "always show" means that the double-space/period simply will not work, and I have to put up with the suggestion box always popping up as I type with the physical keyboardFor now, I have to have show word suggestions to be always on as a temporary fix, though I hate it and want it turned off. Hopefully in time I can get the correct fix, which is why I have come here to see if anyone has any suggestions. Even if I've tried a route in the past, I will try it again this time around to doubly-ensure it will/won't fix the issue as we try to come to a proper solution.(P.S. I do not remember trying to use this option on Gingerbread, if it even existed. I just saw it on ICS after upgrading and figured it would be cool to have and ran with it.)
I unfortunately just cracked my display. This means that the screen never lights up and the touch screen doesn't work. I can pretty much only use the voice commands to call people in my contacts and that is it.
I was hoping/wondering if there was some way to read text messages on my computer when I have my phone plugged in through USB. I can't use the web app since I hadn't signed up for Verizon Online and it requires getting a code through text message. I figure the phone has to store the messages somewhere so I should be able to access them using my computer.
I want to use an external hard drive that has contents that I want to be able to view on my samsung galaxy tablet or my motorola droid turbo. How can I do this without rooting them? If I have to root is there a guide that is easy to follow for both devices. I have the proper connection type usb connector.
View 8 Replies View RelatedSince the last automatic Droid Razr update a few weeks ago it is very complicated to mark all unread emails as read! It was easy to do before but after this update it seems not to work! If go to my main email account I can sort the email by date, unread, or other options. I select by unread. I then press the menu key and select "select all". Then some iconw appear in the bottom: a trash, a mail, and a flag. I select the mail one and it opens up and the word "mark read" appears but the messages don't clear as read. It used to work without issues before the update.
View 1 Replies View Relatedhow to trigger a Smart Action using the "double-tap" feature of the Home button? I would like a Smart Action to trigger the Vehicle Mode on my phone. I know that there is a blue tooth trigger to do so, but I do not have any blue tooth devices.
View 5 Replies View RelatedHas anyone else experienced this? It seems to take a very, very long time to retrieve the device model information. It is extremely quick up to that point, and then when the "round circular M" appears, it seems that it is stalled for some reason. I know I have more than 100 photos and a few videos, but should it take up to half an hour?
View 1 Replies View Related