Motorola :: Cliq2 Can't Read SD Card After Update To 1.1.30
Jun 27, 2011
i updated my cliq2 system to 1.1.30 yesterday.But mobile can't read the SD card.I have two SD cards.One is the original 2G sd card,the other is kingston 8G sd card i bought previously.
I am sure of the 2 SD card is OK.i can use them in my PC.And i tried them in my friend's phone.They can work too.Then i formated them.But still can't be read in my 1.1.30 Cliq2.
Now i set my Cliq2 back to the 1.0.23 system again.phone can read SD card right.
I recently updated my X10 to the 2.3 version (Gingerbread) earlier this week, but doing so has brought along a problem. Ever since I have updated i cant get into my SD card on the Phone, or when I run PC companion. I have to slots here at home for me to test the card, but it was working absolutely fine until the update, honestly it was seconds afterwards it stopped working.
I replaced my cliq with the cliq 2 today. When I moved my 2gb sandisk sd card into my new phone, the phone was unable to recongnize that it contained the card. It worked perfectly fine on my old phone, so I put it back in my old phone, transferred the files from the card onto my computer to save them, and then formatted the card. I put the card back into my new phone and it still doesn't recognize it.
I have an SD card the says "MICRO HC 8GB co8G Taiwan". It has a little circle that has a "4" in it. My Droid X2 is reading it as a 4 GB card and says it's full even though most of my apps are in the internal memory. When downloading app data it says there's enough room. When I removed the SD card, there are a number of apps that are checking as being on the SD card. When I "Move to media area" it changes to "Move to phone" which suggests that it just move the app to the SD card...which in not in the phone!
Is this a programing problem with the phone where it's not finding the SD card at all, or is this a faulty SD card?
Can anyone shed light on the SD card issue.Was it activated as read only on purpose or is this a bug. Will everyone be satisfied with a read only SD card?
My photon does not read the Micro SD card. This problem has been there for 2 months. I never had a need to use the Micro SD card so i did not bother.
This seemed to happen since the last software update. Before that, it worked fine.The phone simply does not recognize any Micro SD cards. I tried 2 different micro sds and the same thing happened.
The buttons where it says"Mount SD card" are always disabled(shaded). And the phone does not let me erase data from SD card either.I tried the reset from Privacy>Factory Reset. Same thing happened. It reset the phone but it still does not read Micro SD.
As of Friday (yesterday), my external SD card (32Gb) is being mounted READ ONLY by the system. I cannot use any app on the XOOM to write files, or move files, on that card. I have tried andSMB, andFTP, Astro file manager, andExplorer, File Manager HD. I have taken the card out of the system and reformatted it using the SD formatting utility from the SD association on a PC. I have tried another (2Gb) card and the same problem exists. Both cards work flawlessly using a card reader on a PC.
I can write to it only via an MTP connection to a PC. Today, the card is labelled "SD Card" under MTP. Before yesterday, it was "External Storage". Before yesterday, I had no problem using either andSMB or andFTP to download files to the SD card. I am assuming there was something in a recent update that has removed this feature from my device. When I got the device, it was at 3.2. Now it is at 4.1.1.
How do I get this card to mount R/W so I can actually use it on my device as WRITABLE STORAGE, like I was allowed to do just a week ago? How do I get this device to stop magically updating itself, so I can prevent you (Motorola, Google, whatever) from removing functions that I have already used, need, and expect to continue working? I actually don't care if an update is what broke this or something else, I do not want automatic updates enabled, and I can see no means of preventing them, other than giving up WiFi capabilities permanently. This is a XOOM Wi-Fi.
I just got my Xoom WiFi back from Motorola repair - it somehow had a latin american ROM on it and wasn't receiving the ICS upgrade. Well now it has ICS and, for the most part, everything is fine. I am having problems with the SD card though. This is an SD card I used when I had Honeycomb on the unit. I was able to write to it just fine back then.
I took it out before sending the unit in for repair, and I put if back after receiving the unit back. After reinsertion, I can see/read all of the files that I had on there from before, but I cannot write/edit/delete anything on it, and when I look at it in a file manager, it shows up as read only. I removed the card, put in in my PC (with an adaptor) and reformatted it, still read-only.
While it was still in the Xoom, I connected to my PC and was able to access and even write to the card from my PC. But I still cannot do anything that attempts to write to the device from Android. I think the ability to write to the card from the PC indicates that there is not an issue with the card. I think the issue is how it's mounted. But I cannot find a way to mount it as writable unless I root my Xoom (which I'd rather not do).
I put a couple of albums on a Mirco SD card and inserted it into my Xoom.The card shows up under /mnt/external1The albums are there and I can select each song individually and play them using the default "Music" player, RockPlayer, or Winamp.What I can't figure out is how to get any of those Media Players to read from the SD Card automatically?
( player that does not see the SD Card. I'm trying to convice the doubleTwist developers that it's THEIR issue. They have so many users going through hoops to describe their problem and give them details without really fixing the problem. It's been about 7 months since the first issue was reported to them. And of course, most users are jumping ship and requesting refunds.
Since the last automatic Droid Razr update a few weeks ago it is very complicated to mark all unread emails as read! It was easy to do before but after this update it seems not to work! If go to my main email account I can sort the email by date, unread, or other options. I select by unread. I then press the menu key and select "select all". Then some iconw appear in the bottom: a trash, a mail, and a flag. I select the mail one and it opens up and the word "mark read" appears but the messages don't clear as read. It used to work without issues before the update.
In Contacts, at the top above "My number" it says "Cannot read SIM card". I got a new SIM card in case the old one was faulty but it's just the same. Rest of phone seems to work OK, including Contacts I've added.
I have just moved from K810i to X10.When the SIM is placed into the X10, it fails to detect the SMS Messaging ->Menu ->Settings ->SMS Settings, Manage SIM card messages.All it does is show a perpetual small ring that keeps circling and the word retrieving.How do I read the SMS from my SIM? Its on MAXIS and Digi?
I have a 32gb SD card from my Galaxy S4. The V10 will not read it. Lady at AT&T says Samsung & LG don't recognize same stuff on the card. I don't wanna lose what I have on my SD. How do I get my V10 to read the files? Also I'm waiting on the 200 gig card.
I bought a great at&t 9700 today which i tested before i paid for. I got home and noticed the sim card was tough to get in and i forced it. Doing this broke a contact point off in the sim socket giving initialization failed message. I took the phone apart trying to come up with a fix of my own...... no success
-what are my options? i cannot find the main board and the socket is integrated unlike other blackberry models.
my 8520 curve won't read it's SD card? i know it's definitely not the card as my wife just got a new BB also and it came with a brand new card that can't be read either. Thought i could live with it. but can't. You can't have any music, video content etc. My first blackberry died in a pint of guiness (don't ask), i took the sd card out before the insurance claim and had my fingers crossed that it would have survived the black death, but when my new replacement BB came it couldn't read the card. which i thought was down to the black stuff - initially.However since then i've tried different cards leaving me to believe i may still have the data on the original and that the phone or card reader is cream-crackered?
I've had my Blackberry Torch for a few months and it used to flash "Media Card Inserted/Removed" constantly (alternating between the two) untill I would just take it out and give up. Now it has got to the point where it won't read any memory cards at all. I recently posted about this and was told to format the card in my PC then in my phone, which worked great for a few hours then it flashed "Media Card Removed" and was not recognised at all after that. Now when I repeat the format procedure (in PC then in phone) it recognises it for about 10 seconds then says its removed. The media card slot doesn't appear to be damaged or loose.
i was on tmobile using a tmobile sim card on an old motorola with all my contacts (my vivaz pro is being fixed). i transferred to att service and tried to use my tmobile sim card to upload contacts, and it cannot read.
right after i upgraded to ICS, i tried to connect the phone to pc via usb and in my computer i my ray as a portable device but when i try to explore it, it shows nothing. not a folde was shown..
How to get my phone to "find" the micro SD card? Have put it in and out,restarting it with it in and I have checked that it works but somehow it doesn't work in my phone.
